BESSEY STC-HH70 Horizontale, automatisch verstellbare, vernickelte Kippklemme, Silber

Name: BESSEY STC-HH70 Horizontale, automatisch verstellbare, vernickelte Kippklemme, Silber
Brand: Bessey
SKU: 0788502200943
Price: 58.03 EUR
Availability: InStock

Brand:Bessey

3.6/5

€
58.03

Die Kraft, schnell in Position zu sein! Die Auto-Adjust Kniehebelspanner-Serie von BESSEY bringt bedeutende und positive Innovationen auf den Kniehebelspanner-Markt. Erstens kann die Klemmkraft durch Drehen einer integrierten Druckschraube in einem Druckbereich von 25–550 lbs eingestellt werden. Zweitens passt sich die Klemme automatisch an unterschiedliche Werkstückhöhen an, ohne dass sich die aufgebrachte Klemmkraft wesentlich ändert. Drittens ist die Haltekapazität der BESSEY-Kniehebelspannerserie mit 700 lbs recht hoch. Die Kombination dieser Merkmale ist ein starkes Argument für Kosteneinsparungen, höhere Produktivität und mehr Sicherheit am Arbeitsplatz. Wie? BESSEY-Kniehebelspanner können ein breites Spektrum an Kniehebelspannern der Konkurrenz ersetzen, wenn unterschiedliche Spannkräfte und -kapazitäten erforderlich sind. Dies bedeutet geringere Werkzeugbestände und längere Rüstzeiten. Die Klemmen gelten auch als sicherer für reale Anwendungen, bei denen Schwankungen in der Werkstückhöhe dazu führen können, dass die angewandte Klemmkraft zu hoch oder zu niedrig ist (mit den daraus resultierenden Sicherheitsrisiken, die diese Bedingungen mit sich bringen). Ideal für Werkstattarbeiten oder Kleinserien; Die selbstjustierenden Kniehebelspanner von BESSEY sind ein Mehrwert für jede Operation. BESSEY Einfach besser. BESSEY. Einfach besser.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0788502200943

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Handwerkzeuge, Spanntechnik, Klemmen, Kniehebelzwingen,

Der extra große 1" x 2 1/8" gepolsterte Griff bietet mehr Benutzerkomfort und einfache Bedienung. Der große Flanschsockel (2 1/4 Zoll x 2 1/2 Zoll) ist für die Verwendung mit 1/4 Zoll- oder M6-Befestigungselementen konzipiert. Auf den Druckstücken aus Stahl ist eine abnehmbare, nicht beschädigende Kunststoffkappe enthalten. Eine automatisch verstellbare Kniehebelklemme von BESSEY kann eine Reihe konkurrierender Klemmen ersetzen. Zeitraubendes manuelles Einstellen der Spindelhöhe zur Aufrechterhaltung einer sicheren und korrekten Spannkraft entfällt. Der BESSEY Auto-Adjust Kniehebelspanner passt sich automatisch an Schwankungen der Werkstückabmessungen an und behält dabei eine konstante Spannkraft bei. Einstellbare Klemmkraft – die integrierte Klemmkraft-Einstellschraube kann verwendet werden, um eine tatsächlich ausgeübte Klemmkraft von 25 bis 550 lbs zu erzeugen. (maximale Tragfähigkeit 700 lbs.).

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Bessey
Color	Silver
Color	‎Silver
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 257 ratings 4.6 out of 5 stars
Finish	‎Nickel plated
Included Components	‎Toggle Clamp
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	8.27 x 2.24 x 2.52 inches
Item model number	‎STC-HH70
Item Package Quantity	‎1
Item Weight	0.86 Pounds
Item Weight	‎13.8 ounces
Manufacturer	‎BESB9
Material	Alloy Steel
Material	‎Alloy Steel
Number of Handles	‎1
Number Of Pieces	‎1
Part Number	‎STC-HH70SB
Power Source	‎Hand Powered
Product Dimensions	‎8.27 x 2.24 x 2.52 inches
Style	STC-HH70
Style	‎STC-HH70
Warranty Description	‎1 year against manufactuirng defects

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: PhotoKing

Fickle to use

I bought a pair of these for my drill pres. I was tired of the metal flinging from my hands. I wanted something easy to use, but it took a while to get it the way I liked. The biggest problem is, it lifts t track out fast. I had to use screws with nuts to keep it from doing that. And you must keep all hardware in the front. Or it will bend itself or the thing its attached too. For me, I used a heavy plate steel I had around, and put a screw in the bottom, using a nylon nut in that really hard to get at hole they included in the center, so I can swivel the clamp. The rest I used some bar metal to slide into my track. That set up works, but the controls are fickle. A tiny turn of the screw makes it either possible or impossible to close. And there is no large knob like they had on older models. Its an allen key, that isn't included, and you have to keep it around so you can adjust it if needed. I would have liked to see a longer shaft as well. I can't just change it because I need a ball head to make that end work. So I have to add wood to make it longer which isn't ideal in all situations. It could have also used padding on the lower part too, its sharp. I had to print a tpu cover for it, looks better, and its easier to use. Not cold there either.

Scritto da: MAM

1 of 4 does not work, the others are really useful

These Bessey Auto-adjust in line toggle clamps are great and very easy to use. I am using them with a Rockler T-track table as an extra set of hands, to align drawer parts and hold them in place so I can glue them together, and then apply conventional F-style clamps to compress the joints. The Bessey Auto-adjust clamps only have a limited range of adjustment (~1 inch), but by changing the thickness of wood spacers between the clamps and the drawer sides (see pictures), I can accommodate a range of drawer sizes without moving or replacing the mounting blocks under the clamps. My reason for only awarding three (3) stars is because one (1) of the four (4) clamps I purchased failed while I was setting it up for the first time. It worked for a few minutes, and then suddenly there was NO clamping pressure whatsoever regardless of the adjustment setting. These clamps have not been abused. I am using them at close to the minimum possible clamping pressure. My Rockler T-track table is not intended for this type of use and may not be strong enough to apply serious clamping forces this high above the table surface without damaging the T-tracks.

Scritto da: WishIknewThisBefore

Clamps are GREAT but can be better with a knob added

The media could not be loaded. As one reviewer said, once you try these clamps you will never go back to the old style. The fact that you can set tension and then change to pieces with different thicknesses and it will auto-set the same clamp pressure is fantastic. However, every time you want to make a change to the distance away from the clamp, you have to track down a wrench to change the nut on top. The thread size they use is about 5/16, but won't fit a 5/16 plastic knob. (Must be metric, and who sells plastic metric knobs?) I made a custom knob out of wood by routing a perfectly sized, nut-shaped hole in some 1/2" Baltic Birch plywood with my Pantorouter (search pantorouter on YouTube to see a fantastic home-made tool for mortise/tenons and special applications). Now I don't have to keep a wrench around. :-) I also mounted it to 3/4" baltic birch with a hole in the center to add a 5/16 T-bolt to easily attach the Bessey to my Pantorouter table top. Now I can move it around with ease.

Scritto da: Emily

Bessey Reinvented the Toggle Clamp

I am a professional woodworker and I bought these for my business to use with a router/shaper coping sled that I am building. Buy if (1) you want to use these in a jig/fixture that will get used for many repetitive cuts, or production work (2) you need to hold material of different thicknesses (3) you want to adjust the hold down pressure to protect delicate materials. Don't buy if a regular toggle clamp will work for your application. Especially for infrequent use, and where all the material is of the same thickness. Many thousands of people have managed to scrape by and make a living using regular toggle clamps, before these came along. I bought these since I wanted the best I could get, as am using them in a production environment. I am satisfied and they certainly hold the material tight. Tip of the Day: Place strips of PSA (adhesive) backed sandpaper on the surface of jigs/fixtures to greatly enhance the hold down abilities of toggle clamps. If you really need to hold a part securely and simply cannot risk having something come loose (aggressive cuts on a shaper come to mind) use a couple of screws placed in a concealable location in addition to your toggles.

Scritto da: Troy D.

unique product

I've ordered both the horizontal and vertical version of this clamp. There's a much greater clamping range with the vertical clamps. These clamps are very large for toggle clamps, and do not fit well in many applications. One of my horizontal clamps bound up from the get go and had to be returned. I use mine to clamp picture frames for precision miters, and really like the fact that tension remains constant. This is really an important consideration for finish moldings where I'm very concerned about too much pressure marring the finish. There is less than an inch range on the horizontal clamp though. Again, the vertical clamps have a greater range. Overall a really unique product and very ingenious design. I would advise anyone to check the specs before ordering as these clamps are quite large and may not fit if space is tight.

Scritto da: Joe

price

Works Great

Scritto da: Honest Reviewer

Brilliant for repetitious workflow. Not as great for variable workflow.

Pretty brilliant mechanism. It self-adjusts to consistently ensure a firm clamp down on objects with slightly different depths. Would be nice if they made it easier for this thing to quickly attach and detach from a work surface. I don't use it often because it takes a long time to get it secured in the position I need it in. It's probably great for repetitious workflow, but most people have a highly variable workflow.

Scritto da: Uqbar

Lo q esperaba de Bessey!

El producto es justo lo q esperaba de Bessey, sólido y de buen diseño. Incomoda un poco el acabado de metal, pueden quitar de todo el filo y darle mejor boleado, pero no afecta el desempeño del producto. Muy buena inversión!

Scritto da: Papa chippy

Quality

Works well

Scritto da: MilkMan

nice clamps

Im a fan of other bessey clamps due to how smooth they operate vs cheap clamps. This one works just fine as well, but honestly nothing special about it. So, in my opinion, this is overpriced compared to cheaper options as well as other bessey clamps.

Scritto da: Denise Leclair

utilisation

Je l'ai acheté pour mon conjoint il se dit satisfait .

Scritto da: Judith Ro

Almost idiot proof ho;ld down clamp

Read the instructions, very simple, then you have a perfect clamp

Scritto da: Darren

Fast shipping

Strong hold