CURT 56012 Fahrzeugseitiger kundenspezifischer 4-poliger Anhängerkabelbaum, passend für ausgewählte Chevrolet Equinox, Suzuki XL-7 SUV, Pontiac Torrent, Schwarz

Brand:CURT

3.5/5

59.65

Die maßgeschneiderten Kabelanschlüsse von CURT sind die einfachste Möglichkeit, Ihr Fahrzeug mit einem CURT-Anhängerkabelanschluss auszustatten. Sie sind mit einigen der fortschrittlichsten Technologien der Branche ausgestattet und jedes einzelne ist maßgeschneidert, um mit einer bestimmten Marke und einem bestimmten Modell zu funktionieren. Einige Automobilhersteller installieren am Fahrzeug eine spezielle Steckdose, die für die Verkabelung zwischen Fahrzeug und Anhänger verwendet wird. Obwohl diese spezielle Buchse nicht in jedem Fahrzeug vorhanden ist, nutzt ein kundenspezifischer Kabelstecker von CURT – auch T-Stecker genannt – die Buchse für eine einfache, stressfreie Installation. Anstatt dass Sie das Kabelsystem Ihres Fahrzeugs schneiden, spleißen und löten müssen, verwendet der kundenspezifische Kabelstecker einen einzigen OEM-kompatiblen Stecker und stellt sofort eine standardmäßige, universelle Fahrzeug-Anhänger-Kabelverbindung her, normalerweise in Form einer 4-Wege-Verbindung Wohnung. Alle maßgeschneiderten CURT-Kabelanschlüsse werden fahrzeugspezifisch gefertigt, um eine möglichst einfache Installation und beste Passform zu gewährleisten. Dieser spezielle Steckverbinder bietet eine 4-Wege-Flachsteckdose und ist als individuelle Verkabelungsoption für bestimmte Baujahre des Chevy Equinox, des Suzuki XL7 SUV und des Pontiac Torrent konzipiert (werkseitiges Abschlepppaket erforderlich; zur Überprüfung der Kompatibilität Ihres Fahrzeugs siehe Anwendung). die Info). Im Lieferumfang ist die gesamte erforderliche Hardware enthalten, um eine solide Verbindung herzustellen. Im Lieferumfang ist außerdem eine Staubschutzhülle enthalten, um die Anschlussbuchse bei Nichtgebrauch sauber zu halten. Um eine dauerhafte Zuverlässigkeit zu gewährleisten, werden alle kundenspezifischen Verkabelungssteckverbinder von CURT gründlich auf optimale Funktionalität getestet. Stress ist das Letzte, was Sie verspüren sollten, wenn Sie einen Anhänger ziehen – egal, ob Sie Ihr Wohnmobil zum Lieblingscampingziel, Ihr Geländefahrzeug zum Jagdgebiet oder Ihr Fischerboot zum neuen versteckten Hotspot transportieren. Wir bei CURT sind der Meinung, dass Ihre Anhängerausrüstung zum Vergnügen Ihres Erlebnisses beitragen und es nicht beeinträchtigen sollte.

STAUBSCHUTZHAUBE. Um eine lange Nutzungsdauer und Witterungsbeständigkeit zu gewährleisten, wird dieser 4-polige Kabelbaum für die Anhängerbeleuchtung mit einer Staubschutzhülle aus Gummi geliefert. Bei Nichtgebrauch passt es problemlos auf den 4-Wege-Flachstecker und schützt ihn so vor Witterungseinflüssen. EINFACHER GRIFF. Dank des ergonomischen Designs dieser Fahrzeugsteckdose ist das Anschließen Ihrer Anhängerverkabelung und Anhängerbeleuchtung ganz einfach. Es verfügt über Laschen an der Ober- und Unterseite für einen besseren Halt beim Ein- und Ausstecken in Ihren Anhänger. FAHRZEUGSPEZIFISCH. Dieser Aftermarket-Kabelbaum für Fahrzeug und Anhänger ist für ausgewählte Baujahre des Chevrolet Equinox, des Suzuki XL 7 SUV und des Pontiac Torrent konzipiert (werkseitiges Abschlepppaket erforderlich). STANDARDANSCHLUSS. Diese steckbare 4-Flach-Anhängerverkabelung kann zum Anschluss von Anhängerrücklichtern, Bremssignalleuchten und Blinkern verwendet werden. Die 4-Wege-Verkabelung der Anhängerbeleuchtung ist bei einer Vielzahl von Anhängern beliebt und bietet vielseitige Anhängeroptionen für Ihr Fahrzeug. EINFACH ZU INSTALLIEREN. Kein Schneiden! Kein Spleißen! Dieses Anhängerkabelbaum-Set lässt sich in die vorhandene Werksverkabelung Ihres Fahrzeugs einstecken und stattet es mit einem standardmäßigen 4-poligen Anhängerverkabelungsstecker hinten zum Anschließen und Ziehen eines Anhängers aus.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 154 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 2 inches
Item model number ‎56012
Item Weight 0.43 Pounds
Item Weight ‎6.9 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56012
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56012
Product Dimensions ‎9 x 4 x 2 inches

3.5

13 Review
5 Star
76
4 Star
11
3 Star
5
2 Star
1
1 Star
7

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: minute
Easy fit
The ease of use and adaptability was best of all!
Scritto da: BethAnne
simple install in less than a minute
Unlike others complaining, this harness came with everything pictured, the harness, the relays, the fuses, and detailed instructions which was really only needed for the relays and fuses because some Vehicles you must add these to the panel under the hood. The harness was a direct plug-in, and only work once the relays and fuses were installed. Most newer vehicles that are capable for Towing unless setup already at the factory they will not have the relays and fuses installed for the trailer lights to work as they are on a completely separate circuit all their own.
Scritto da: James
Perfect
Nice to find your 2007 Equinox already is pre-wired for trailer lights. YES under your side stored jack, way down in the bottom, fastened to the outside wall, is a factory plug that this adapter plugs right into. Then add the 3 fuses to the under hood fuse box, plus add two relays into the same fuse box and you have trailer lights without any tools needed. ALL fuses and relays are included, along with the wireing (about 5 feet long) with the flat 4 way plug.
Scritto da: Donald Lavery
I was able to install this in a 2007 Suzuki ...
I was able to install this in a 2007 Suzuki XL7 in mere minutes. Installing the relays is a little challenging though. I couldn't find any orientation marks on the relays (they can fit the socket two ways) nor on the fuse box. The instructions were not very helpful for this. I did notice that the existing relays in the fuse box were oriented so the that text on their tops could be read standing in front of the vehicle. I decided to try this orientation first when inserting these new relays. To help eliminate any doubt, I inserted the key into the vehicle ignition switch and turned it to the "RUN" position (without actually starting the vehicle). I turned on the right turn signal then lightly set the new relay in the location for the right trailer turn signal. As soon as the relay pins made contact with the socket, the relay began to operate. I could both feel the relay operate and hear it. I inserted the relay fully into the socket. I repeated this procedure for the other relay, with the left turn signal operating.
Scritto da: Christopher Allen
Easy hook up works good
Works good easy to install
Scritto da: rufousray
Super easy installation in my 2007 Chevrolet Equinox
This couldn't have gone better. So easy to install and it works great. I installed it in my 2007 Chevrolet Equinox. You just open the access door for the jack and remove the jack. At the bottom of the compartment is a connector that the wiring harness plugs into. I installed the insulation cap to make sure nothing ever touched ground and then I stored the hack and the wiring harness (because I didn't need it right now) and closed up the jack access door. Then, under the hood you open the fuse panel and locate 3 fuse, and 2 relay locatioins that aren't populated (as identified in the installation instructions) and install the 3 fuses and 2 relays that come with the kit. Reinstall the fuse panel cover and slam the hood. You're done.
Scritto da: David Farris
Easy
Car
Scritto da: PawPaw
Easy Install, Functions Perfect.
So much better than the old school way of splicing in wires and having the signal blink really fast, and trial and error trying to get the right wires connected to each other. This is a simple 15 minute install and it works flawlessly..Thanks to the fuses and relays, the lights function 100% perfect and your blinker is normal LOL, and you have a much neater and more reliable connection.
Scritto da: Stanley hunt
Easy to install
Great item
Scritto da: Agnes Brown
Works well
Works great in my chevy equinox 2008 had no issues installing and have been used a lot would recommend.
Scritto da: Amazon Customer
PACKAGE OPENED AND PARTS MISSING!
GOT THE PARCELL, OPENED TO FIND THE PACKAGE WAS STAPLED ON EACH SIDE AND ALL THE RELAYS WERE MISSING, THE MOST IMPORTANT AND EXPENSIVE PART...WAKE UP AND TAKE OFF THE MASKS, YOUR BRAINS NEED OXYGEN TO WORK PROPERLY, IT'S COMMON SENSE, GEZZZ
Scritto da: Chris Bennett
Worked great
Easy to install and instructions were great. Good quality too
Scritto da: Glen
easy installation
So easy to install

Verwandte Produkte

hot
Hopkins 47155 4-Draht-Flachadapter
3.7/5

€ 56.60

Hopkins 47155 4-Draht-Flachadapter
3.7/5

€ 56.60

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array