CURT 56020 Fahrzeugseitiger kundenspezifischer 4-poliger Anhängerkabelbaum, passend für ausgewählte Ford E-150, E-250, E-350 Super Duty

Brand:CURT

3.6/5

75.56

Wenn Ihr Fahrzeug nicht mit einer Verkabelung zum Ziehen eines Anhängers ausgestattet ist, ist die kundenspezifische Verkabelung von CURT die ideale Lösung. Ein kundenspezifischer Kabelbaum – auch T-Stecker genannt – ist ein einfaches Plug-and-Play-Elektrogerät, das an das elektrische System Ihres Fahrzeugs angeschlossen wird und eine standardmäßige, universelle Anhängerverkabelung bietet. Dies erfolgt über zwei oder mehr fahrzeugspezifische, OEM-kompatible Steckverbinder zum Einstecken in die Rücklichtbaugruppe, sodass beim Einbau kein Schneiden, Spleißen und Löten erforderlich ist. Kundenspezifische Kabelbäume werden fahrzeugspezifisch angefertigt und sind zwar nicht für alle Fahrzeuge erhältlich, bieten aber eine der schnellsten, einfachsten und sichersten Möglichkeiten, ein Fahrzeug zum Abschleppen zu verkabeln. Dieser spezielle Steckkabelbaum verfügt über eine 4-Wege-Flachsteckerbuchse und ist als maßgeschneiderter Kabelbaum für bestimmte Baujahre des Ford E150, E250 und E350 Super Duty konzipiert (Informationen zur Fahrzeugkompatibilität finden Sie in den Anwendungsinformationen). Im Lieferumfang sind alle notwendigen Verkabelungskomponenten enthalten, um eine zuverlässige Anhängerverkabelung herzustellen, sowie eine Staubschutzhülle, um den Stecker sauber zu halten, wenn er nicht verwendet wird. Sie haben ein Bild von Ihrem nächsten Ziel im Kopf – vielleicht ist es die Bootsanlegestelle an Ihrem Lieblingsangelplatz, vielleicht ist es ein Campingplatz mit Blick auf eines der Meisterwerke der Natur, oder vielleicht ist es die nächste große Baustelle. Um dieses Bild in die Realität umzusetzen, bedarf es jedoch mehr als nur Tagträumen. Es braucht eine solide Verbindung und die richtige Menge an Leistung. Die kundenspezifische Verkabelung von CURT wird mit einer der fortschrittlichsten Technologien der Branche hergestellt und ist so konzipiert, dass sie einfach installiert werden kann, sodass Sie eine langlebige elektrische Verbindung für Ihre Anhängerkupplung erhalten.

STAUBSCHUTZHAUBE. Um eine lange Nutzungsdauer und Witterungsbeständigkeit zu gewährleisten, wird dieser 4-polige Kabelbaum für die Anhängerbeleuchtung mit einer Staubschutzhülle aus Gummi geliefert. Bei Nichtgebrauch passt es problemlos auf den 4-Wege-Flachstecker und schützt ihn so vor Witterungseinflüssen. EINFACHER GRIFF. Dank des ergonomischen Designs dieser Fahrzeugsteckdose ist das Anschließen Ihrer Anhängerverkabelung und Anhängerbeleuchtung ganz einfach. Es verfügt über Laschen an der Ober- und Unterseite für einen besseren Halt beim Ein- und Ausstecken in Ihren Anhänger. FAHRZEUGSPEZIFISCH. Dieser Aftermarket-Kabelbaum für Fahrzeug und Anhänger ist für ausgewählte Baujahre des Ford E 150, E 250 und E 350 Super Duty konzipiert. STANDARDANSCHLUSS. Diese steckbare 4-Flach-Anhängerverkabelung kann zum Anschluss von Anhängerrücklichtern, Bremssignalleuchten und Blinkern verwendet werden. Die 4-Wege-Verkabelung der Anhängerbeleuchtung ist bei einer Vielzahl von Anhängern beliebt und bietet vielseitige Anhängeroptionen für Ihr Fahrzeug. EINFACH ZU INSTALLIEREN. Kein Schneiden! Kein Spleißen! Dieses Anhängerkabelbaum-Set lässt sich in die vorhandene Werksverkabelung Ihres Fahrzeugs einstecken und stattet es mit einem standardmäßigen 4-poligen Anhängerverkabelungsstecker hinten zum Anschließen und Ziehen eines Anhängers aus.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 190 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎56020
Item Weight 0.71 Pounds
Item Weight ‎11.4 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56020
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56020
Product Dimensions ‎9 x 4 x 3 inches

3.6

11 Review
5 Star
80
4 Star
8
3 Star
5
2 Star
2
1 Star
5

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Kel
Worked great!
This worked great for my 2008 e350 ford. The instructions didn't work for my passenger model though. I had to follow a video from etrailer, this harness is almost the same as theirs but it doesn't have the long wire for ground (so it's much easier to install).
Scritto da: JDeMattos
Hyperflash on left signal ONLY.
Plug and play harness. Instructions are pretty vague but it’s not rocket science. They essentially “piggyback” off of the stock tail light bulbs. They should label right and left. Thankfully I tested before reinstalling everything and figured out I had it backwards. Right signal works as it should on my van and my trailer but left signal is blinking twice as fast or what’s known as “hyperflash”. All lights are operable so it sure why only one side is flashing faster than the other. Docked a star for that. Other than that, works as it should.
Scritto da: KL
Works but seems poorly planned
We installed this in a 2014 E350. It works well enough and it IS worth it simply for the factory style plugs at each tail lamp. However, the right (green/white) side was too short (at least for how I chose to install it) and the left (yellow/brown) was inexplicably long - VERY long. I actually wound up splicing in about 2' of green and white wire, so you might consider having some green and white primary wire on hand along with some butt connectors. Note the included instructions talk about slitting a grommet but I could not locate said grommet and it was not mentioned in the YT video, either. I was simply able to run through a hole where the taillight wires entered and down behind the plastic trim of the last pillar, then under the kick plate. The hole did not feel like it had any sharp edges and actually felt nicely finished. Now, from the kick plate I took advantage of 2 oval slits next to the door striker. I believe other reviewers have alluded to this as well. I put all 4 wires of this harness in plastic loom to protect them as they pass down through the body. Our vehicle had a tapped hole in this area as well that had a plastic thumb screw of sorts. I used a 3/8" insulated rubber clip around my plastic loom and replaced the thumb screw with a standard M6x1.0 bolt, see pic. You will have to trim some rubber "grips" off the plug to get it thru the oval holes. These are just there for human finger comfort and serve no important purpose. From here I ran the plug under my hitch and again secured the wiring with an insulated rubber clip.
Scritto da: Carlos Carlo
Easy to install and have trailer lights
Not too much to say about this other than it went in easy hooked up easy and works fantastic. One thing I think could be better is a little more detailed instruction and maybe color-coded step by step instruction be nice but not really necessary it's definitely worth purchasing this kit and installing it in your van so you have trailer lights it's pretty cool
Scritto da: James M. Droddy
Perfect fit
Fit perfectly. Just takes some time to install on the van since you have to run the wiring to both lights. However, works perfectly.
Scritto da: Notso
1 tool required
I just needed a hex bit to remove my tail lights then these were plug-n-play. Fantastic kit. Saved me the time of splicing wires etc...
Scritto da: T in florida
Easy to install vehicle trailer harness
The harness was incredible simple to install on a 2013 Ford E-350 full size van
Scritto da: Roger Ferrer
Muy bueno
Muy bueno
Scritto da: mike
Great product
Very simple plug and play ! Highly recommend
Scritto da: GERARD ARSENAULT
nice set up
foul proof 15munute job
Scritto da: Amazon Customer
Easy install and works.
Straightforward to install and worked as expected.

Verwandte Produkte

hot
Hopkins 47155 4-Draht-Flachadapter
3.7/5

€ 56.60

Hopkins 47155 4-Draht-Flachadapter
3.7/5

€ 56.60

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array