E-Z Lok SK31020 Spiral-Gewindeeinsatz-Set, Edelstahl 304, 3/8-24 Gewindegröße, 0,750 installierte Länge (10 Stück)

Brand:E-Z LOK

2.5/5

74.23

E-Z Lok stellt Gewindeeinsätze für Metall, Kunststoff und Holz her. Der Hauptsitz des Unternehmens befindet sich in Gardena, Kalifornien.

Im Set enthalten: Das praktische Set enthält Spulengewindeeinsätze für Metall, einen Bohrer, einen STI-Gewindebohrer, ein Installationswerkzeug für Gewindeeinsätze und Zapfenbrechwerkzeuge. ZUR VERWENDUNG MIT ANWENDUNGEN – Die Metallgewindeeinsätze sind für die Verwendung mit weichen Metallen konzipiert: Aluminium, Gusseisen, Magnesium usw. EDELSTAHLDRAHT – Das Kit enthält Gewindeeinsätze aus Edelstahl, die korrosionsbeständig sind und Temperaturen bis 800 °F standhalten. SCHNELLE REPARATUR BESCHÄDIGTER GEWINDE – Reparieren Sie schnell beschädigte Gewinde oder verstärken Sie Gewindelöcher in weichen Metallen mit diesem Schraubenreparaturset für Gewinde.
Brand E-Z LOK
Country of Origin United Kingdom
Fastener Type E
Item model number SK31020
Manufacturer E-Z LOK
Material Stainless Steel
Package Dimensions 8.39 x 4.69 x 1.26 inches; 8.8 Ounces
Size 3/8"-24 Thread Size, 0.750" Installed Length
Thread Size 3/8"-24

2.5

3 Review
5 Star
60
4 Star
0
3 Star
0
2 Star
0
1 Star
40

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Madelyn Chapman
Excellent Product
Worked perfectly - Saved me $1000, since I didn't have to replace the casting The thread that stripped out had a .5 counter-bore 3/8deep. Then the thread went another 1.25 inches. This was perfect, the tap didn't score the bore at all, and I was able to torque the bolt to the required specification. I will definitely use them again when I strip out another thread. Thanks, Sam
Scritto da: Joy Porter
Wrong size tap!
I ASSUMED that everything in the pack was correct, as it listed the tap as 3/8” x 24. I drilled the hole with the 25/64” bit provided and then tapped it with the tap. I then installed the thread coil. However, when I tried to thread the 3/8x24 bolt, it wouldn’t start. I then discovered the reason was the tap was 3/8x16! I couldn’t back the coil back out! My only solution was to try to retap the coil with my own 3/8x24 tap. This required several hours of time and literally destroyed my tap!!!!
Scritto da: Laurie M. Kiser
Best quality thread repair kit
I have done this process 2 or 3 times before with good results. The hardest part of the job is making the hole and tap straight. This kit has the highest quality tools and the new threads are 100 x stronger than original aluminum alloy. Drill bit is extremely sharp. The bit and tap seemed to self level making diy hand tools ok. Both of the repairs I did were perfectly straight in spite of me. The coil did need A LOT OF lubricant to install correctly. I had to use liquid assembly lube to get the coil to seat properly. Spray lube wasn't enough. Not the cheapest kit but totally worth the extra few dollars.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array