E-Z Lok SK40220 Metrisches Spiralgewindeeinsatz-Set, Edelstahl 304, M3-0,5 Gewindegröße, 6 mm Einbaulänge (10 Stück)

Name: E-Z Lok SK40220 Metrisches Spiralgewindeeinsatz-Set, Edelstahl 304, M3-0,5 Gewindegröße, 6 mm Einbaulänge (10 Stück)
Brand: E-Z LOK
SKU: 0847554003664
Price: 48.36 EUR
Availability: InStock

Brand:E-Z LOK

2.7/5

€
48.36

E-Z Lok stellt Gewindeeinsätze für Metall, Kunststoff und Holz her. Der Hauptsitz des Unternehmens befindet sich in Gardena, Kalifornien.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0847554003664

Kategorien Industrie & Wissenschaft, Nägel, Schrauben & Befestigungen, Gewindeeinsätze, Hülsengewindeeinsätze,

Im Set enthalten: Das praktische Set enthält Spulengewindeeinsätze für Metall, einen Bohrer, einen STI-Gewindebohrer, ein Installationswerkzeug für Gewindeeinsätze und Zapfenbrechwerkzeuge. ZUR VERWENDUNG MIT ANWENDUNGEN – Die Metallgewindeeinsätze sind für die Verwendung mit weichen Metallen konzipiert: Aluminium, Gusseisen, Magnesium usw. EDELSTAHLDRAHT – Das Kit enthält Gewindeeinsätze aus Edelstahl, die korrosionsbeständig sind und Temperaturen bis 800 °F standhalten. SCHNELLE REPARATUR BESCHÄDIGTER GEWINDE – Reparieren Sie schnell beschädigte Gewinde oder verstärken Sie Gewindelöcher in weichen Metallen mit diesem Schraubenreparaturset für Gewinde.

Country of Origin	United Kingdom
Exterior Finish	Plain
Fastener Type	Insert
Item model number	SK40220
Manufacturer	E-Z LOK
Material	Stainless Steel
Metal Type	Stainless Steel
Package Dimensions	8.35 x 4.8 x 1.3 inches; 0.16 Ounces
Thread Size	M3-0.5

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: JonnyZee

Broke 5 of them before I got 2 in!

I have an old Egyptian FN49 rifle that someone stripped out the two lock screws under the magazine and trigger guard. I had already drilled out the old screws and bought two NOS ones. Once I figured out what size they were I ordered this kit. The drill had no problem going through the steel as I already had 3mm holes drilled. The tap actually worked pretty well, even using pliers as the handle. I thought the blue thing for breaking the piece off the coil doubled as a handle for the tap. My bad! At any rate it worked fine. I got first coil in and the tang snapped when it was halfway in. Btw, I only needed these to be 3mm long, not 6,but I couldn't find any. I ran the die through again thinking there might be a burr and tried another one, this time with oil on the coil. Same result as before. At least they're easy to rip out and toss in the trash! I finally got one in and ground off the piece hanging through. Broke a few more on the second hole and finally got it to work, although I had to run it through the backside. All in all it worked but I would still classify these as pretty much junk!

Scritto da: Blake Snow

Weak coils

The coils have no robustness at all. While trying to install the tangs broke 3 times instantly either at 0 threads or after 2 threads are installed. I stopped using before I ruin my hole. This is not my first time using coils, they are just low quality.

Scritto da: Desmo

Nice kit. Used to repair brake line holder on Fox 36 fork.

Used kit to repair brake line holder that was stripped out. Good (or better) than new... Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads. After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.

Scritto da: Hugo

Works!

The product worked as advertised. It's awesome that everything you need is included in the kit. I used it to repair an rc truck. The truck is running, the repair has held up. Good product.

Scritto da: sandcastle

Good value

Tool and coils worked really well in an aluminum case where the bolt goes through the bottom and then threads into the top to hold the two pieces together.

Scritto da: Michael D.

If you have any Exceed R/C cars or trucks you need this thread repair kit!

Works good at repairing stripped threads on a Exceed R/C truck where the manufacturer just puts screws directly in the plastic with our threading first. So when you remove the screws sometimes the threads come out with the screws.

Scritto da: D E

Great Product

I thought there was only going to be one insert in the package but it has 10. I only needed one since it worked perfectly the first time.

Scritto da: Sue B.

Five Stars

Very high quality kit with EVERYTHING you need to do small helicoil type repairs