0
0

Gesamt:€ 0.00

Siehe WarenkorbKasse
LoginRegister
0

Gesamt:€ 0.00

Siehe WarenkorbKasse
LoginRegister

Eastman 3/4 Zoll FIP Female Sweat Connection Warmwasserbereiter-Anschluss, gewellter Edelstahl, Silber, 0437012 12 Zoll.

Brand:Eastman

3.2/5

€
26.43

San Michele ist der italienische Name des Erzengels Michael und steht auch für verschiedene Orte und Kirchen in Italien. Die bekannteste ist Isola di San Michele, eine Insel in der Lagune von Venedig in Norditalien. Vicenza Designs bringt mit der San Michele-Kollektion von Knöpfen, Griffen, Türgriffen, Badezimmeraccessoires und mehr den venezianischen Look und die Atmosphäre in Ihr Zuhause. Die Wandplatte aus massivem Zinn mit Einzelauslass ist 2,75 x 4,5 x 0,375 Zoll groß und wird komplett mit Installationsmaterial geliefert. Montagematerial ist im Lieferumfang enthalten. 100 % bleifreies Zinn. Handgefertigt in Scottsdale, AZ, USA.

Menge
in den Warenkorb legenKaufe jetzt

EAN: 0091712378662

Kategorien Werkzeuge & Heimwerken, Grobinstallation, Rohre, Rohrverbindungen & Zubehör, Rohrverbindungsstücke,

TECHNISCHE DATEN: Flexschläuche für Warmwasserbereiter verfügen über einen Arbeitsdruck von 125 PSI mit einem intermittierenden Impulsdruck von 180 PSI; Anschlüsse für Warmwasserbereiter können einer Arbeitstemperatur von 40 °F bis 180 °F standhalten. BLEIFREI: Dieser Rohrverbinder für Warmwasserbereiter ist bleifrei für sicheres Wassertrinken und UPC-zugelassen und besteht aus gewelltem Edelstahl. EINFACHE INSTALLATION: Der Schlauchanschluss des Warmwasserbereiters ermöglicht eine einfache Installation in engen Räumen. Berstsicher: Der flexible Schlauch des Warmwasserbereiters ist mit einer EPDM-Dichtung für eine sichere und solide Verbindung ausgestattet, die Undichtigkeiten verhindert. ANSCHLÜSSE FÜR WASSERHEIZUNGSANSCHLÜSSE: Die Schlauchverschraubungen für Warmwasserbereiter bestehen aus hochbelastbarem, gewelltem Edelstahl, um eine lang anhaltende strukturelle Unterstützung gegen Quetschen, Knicken und Risse zu bieten, und sind mit den meisten Warmwasserbereitermarken kompatibel.
Brand Eastman
Color Silver
Exterior Finish Brass
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 13 x 6.5 x 6.5 inches
Item model number 0437012
Item Weight 0.26 Pounds
Manufacturer Eastman
Material Stainless Steel
Product Dimensions 13 x 6.5 x 6.5 inches; 4.16 Ounces
Size 12 in.

3.2

9 Review
5 Star
44
4 Star
45
3 Star
0
2 Star
0
1 Star
11

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: N. Cooper
Very good, but they still havn't made plumming easy.
Not as flexible as I had hoped. But given all the reviews of the stainless braided flex that have the rubber insides breaking down after a year or two wanted something without the rubber hose inside. Seems like an especially good idea on the hot side of a Hot Water tank. Tried to find out if that problem had been fixed but couldn't find any supplier that knew about it or at least not that would admit it. Those are rated at 200 Deg F. That should be enough but at times depending on the temperature set it might get close to that in the outlet tube. I just didn't want to worry about that happening and the mess it would make. Is fairly flexible and stays where you bend it to. I wish the inside diameter was a full 3/4 like the pipe. I don't like restricting the flow even a little on the main line. Can lead to pressure and temperature issues at the points of usage if they start competing for flow. Will see how much affect if any these have. Using flex is way easier than the old Universal Joints I soldered in before. Biggest hassle is getting the right length for the connection locations and bends needed for a new tank that is invariable not the same as the old one. Wanted to use Shark-bite connectors but just couldn't make them work in this situation.
Scritto da: John D.
Good Quality; Best Pricing. Work Well.
Good quality product. This was also the best price and delivery I could find anywhere. Purchased two of these for a new water tank heater installation. In service for 3 months so far without any leaks. Would recommend to anyone needing this product.
Scritto da: Antonius F.
Good product for water or clear solution. Do not over-tighten or Wah wah...
These are great! But for water only, do not over tighten! Maybe had tighten if you are not a weakling. If weak use a wrench.
Scritto da: EdS
Solid material but easy to bend to create a curve
Very good quality. It is solid but the corrugated feature makes it possible to easily bend it to fit the required installation curves.
Scritto da: Jim
Bends, stays put and nice diameter for pipe.
Bends, stays put and nice diameter for pipe. Can’t find these at local stores. Outstanding product.
Scritto da: Scoop
No leaks!
Bought 3, and all installed easily with zero leaks.
Scritto da: Fynn
UNlined - kiss suggests not to add deteriorating items into your plumbing lines?
Almost bought a lined connector. Read some long term reviews with pix of rubber coming apart inside of piping. This one is KISS + comes with a rubber gasket in each end. I still used plumbers tape - even though likely not required. Flexibility was a must as I took out my water conditioner and needed to loop together two lines that were 4" apart. Rainbowed this flex with no issues.
Scritto da: Duane K.
Product not inspected before being shipped out.
Ordered 4 of the connectors which arrived in 4 different boxes at 4 different times. Two of the connectors were missing the rubber washers which are necessary to get a leak free connection when installed. Planned to use these connectors for a new water softener & on the hot water heater but now I am trying to locate replacement washers. Contacted Eastman to obtain replacement washers but they told me to contact Amazon as it was their issue. So in the end, I have to ship the connectors back and reorder new ones as no one has replacement washers. Will update my review once I receive the new connectors and get them installed to see how they work for me.
Scritto da: Amazon Customer
Stellar!
Perfect for tankless water heater... solid connection... no leaks, even after repeated disconnect/reconnect

Verwandte Produkte

hot
Emberglo 523618 Flammenstab Midco
4/5

€ 60.81

Emberglo 523618 Flammenstab Midco
4/5

€ 60.81

hot
PlumBest C12125R Kupplung, 1-1/4 Zoll, weiß 1,25 Zoll
3.1/5

€ 47.19

PlumBest C12125R Kupplung, 1-1/4 Zoll, weiß 1,25 Zoll
3.1/5

€ 47.19

hot
Delta Faucet RP53468 Pilar-Rückschlagventile, Messing verchromt
3.8/5

€ 91.93

Delta Faucet RP53468 Pilar-Rückschlagventile, Messing verchromt
3.8/5

€ 91.93

hot
NDS 6P03 6 PVC 45-Grad-Winkelnabe von Hub Solvent Weld Fitting, weiß
3.3/5

€ 48.55

NDS 6P03 6 PVC 45-Grad-Winkelnabe von Hub Solvent Weld Fitting, weiß
3.3/5

€ 48.55

hot
SharkBite 1/2-Zoll-Crimpkupplung, 25er-Pack, Messing-Sanitäranschluss, PEX-Rohr, PE-RT, UC008LF 1/2 Zoll, 25er-Pack
3.9/5

€ 64.41

SharkBite 1/2-Zoll-Crimpkupplung, 25er-Pack, Messing-Sanitäranschluss, PEX-Rohr, PE-RT, UC008LF 1/2 Zoll, 25er-Pack
3.9/5

€ 64.41

hot
Supply Giant BMRL1141-10, 1-1/4 x 3/4 Zoll 90-Grad-Reduzierbogen, Temperguss-Gewinderohrverschraubung, schwarz (10er-Pack), 1-1/4 Zoll x 3/4 Zoll, 10er-Packung
3.7/5

€ 79.72

Supply Giant BMRL1141-10, 1-1/4 x 3/4 Zoll 90-Grad-Reduzierbogen, Temperguss-Gewinderohrverschraubung, schwarz (10er-Pack), 1-1/4 Zoll x 3/4 Zoll, 10er-Packung
3.7/5

€ 79.72

hot
Mr. Heater 9/16 Linksaußengewinde x 9/16 Linksaußengewindeanschluss
3/5

€ 24.37

Mr. Heater 9/16 Linksaußengewinde x 9/16 Linksaußengewindeanschluss
3/5

€ 24.37

hot
EASTMAN 60030 Gerader Gaskugelhahn aus Messing, 3/4 Zoll FIP x 1/2 Zoll Außendurchmesser
3.6/5

€ 43.82

EASTMAN 60030 Gerader Gaskugelhahn aus Messing, 3/4 Zoll FIP x 1/2 Zoll Außendurchmesser
3.6/5

€ 43.82

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array

Gesamt:€ 0.00

Siehe WarenkorbKasse

Kategorien

Alle Kategorien
Speisekarte Kategorien Nahe Wagen

Menu