0
0

Gesamt:€ 0.00

Siehe WarenkorbKasse
LoginRegister
0

Gesamt:€ 0.00

Siehe WarenkorbKasse
LoginRegister

Eevelle Wake M1 Trailerbare Bootsmotorabdeckung

Brand:Wake Monsoon Boat Motor Covers

3.5/5

€
60.66

Diese starken Motorabdeckungen bestehen aus Polyester in Marinequalität, das UV-beständig und wasserbeständig ist. M1-Motorabdeckungen von Wake bieten universell einsetzbare, leicht aufsteckbare Motorabdeckungen, die dafür sorgen, dass Ihr Außenbordmotor gut aussieht und vor schädlichen Umwelteinflüssen geschützt ist. Sorgen Sie dafür, dass Ihr neuer Außenbordmotor gut aussieht und schützen Sie ihn vor schädlichen Umwelteinflüssen. Unsere Motorabdeckungen wurden neu gestaltet, um besser zu allen Marken von Außenbordmotoren zu passen. Messen Sie einfach Ihren Außenbordmotor und ermitteln Sie die Abmessungen, die Ihrem jeweiligen Modell am besten entsprechen.

Keine Einheiten verfügbar

EAN: 0692089005399

Kategorien Sport & Outdoor, Sport & Fitness, Boote & Segeln, Boote & Ausrüstung, Boots Abdeckungen,

EINFACHE ANWENDUNG: Schnelles und bequemes An- und Ausziehen ohne zusätzliches Werkzeug. Der Verschluss am unteren Saum lässt sich zum Schutz in Sekundenschnelle fest am Motor befestigen. SICHERE PASSFORM: Starke universelle Passform zur sicheren Befestigung an verschiedenen Motormarken. Das integrierte Gurtband und die Schnellverschlussschnalle im Saum sorgen für eine individuelle Passform für alle Motoren. UV-SCHUTZ: Schützen Sie Ihren Motor vor aggressiven UV-Strahlen, die zu Alterung und Ausbleichen führen können. Der Stoff sorgt dafür, dass Ihr Motor weiterhin frisch und sauber aussieht. ULTRA WASSERDICHT: Unsere Motorabdeckungen bestehen aus UV-beständigem Stoff für eine lange Haltbarkeit. Maximale Abweisung durch ultrawasserdichtes Polyestergewebe. ZUSÄTZLICHER SCHUTZ: Der Stoff ist aus besonders robuster Marinequalität gefertigt, um den Außenbordmotor vollständig und effektiv vor Sonnenlicht, Ausbleichen und Witterungseinflüssen zu schützen.
Brand Wake Monsoon Boat Motor Covers
Brand ‎Wake Monsoon Boat Motor Covers
Brand Name ‎Wake Monsoon Boat Motor Covers
Color Grey
Color ‎Grey
Customer Reviews 4.4 4.4 out of 5 stars 255 ratings 4.4 out of 5 stars
Fit Type Vehicle Specific Fit
Fit Type ‎Vehicle Specific Fit
Item Dimensions LxWxH 28 x 23.6 x 27 inches
Item Dimensions LxWxH ‎28 x 23.6 x 27 inches
Item Package Dimensions L x W x H ‎11.14 x 6.42 x 3.54 inches
Item Weight ‎1.3 Pounds
Manufacturer ‎Wake Monsoon Boat Motor Covers
Material Polyester
Material ‎Polyester
Package Weight ‎0.64 Kilograms
Part Number ‎WM1-225G
Size ‎for 115 to 225 HP Motors
Ultraviolet Light Protection UV Protection
Ultraviolet Light Protection ‎UV Protection
Vehicle Service Type Boat
Vehicle Service Type ‎Boat
Water Resistance Level Water Resistant
Water Resistance Level ‎Water Resistant

3.5

13 Review
5 Star
70
4 Star
15
3 Star
6
2 Star
3
1 Star
6

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Thman
Protects motor from the elements
I picked this up for our Suzuki 115, it’s a little on the large size but is easy to put on and take off. The strap keeps it secure when windy and appears to be a decent grade material. Hoping for years of use out of this cover.
Scritto da: Eric in NH
Size Matters! - Don't be fooled by so many ...
Size Matters! - Don't be fooled by so many reviews speaking of these being big! I have a Mercury 150 4-stroke and based on reviews I ordered the 50 - 115 size as another reviewer spoke of using it on a 75 and on a 150. It would not fit over the cowl at all. I returned that size and got the 115 - 225hp size and it fits perfectly without much slack at all. I am using it for winter protection while stored in NH. Seems to be reasonably well made. I'll update if anything adverse happens with it. UPDATE: After one of the most brutal winters in history for NH, the cover held up very well without any signs of weathering. I anticipate many years of service before needing to replace, and I would simply re-order this one if available.
Scritto da: Amazon Customer
Size Matters
I have a 2003 Yamaha VX225 2 stroke motor. I first ordered the 225-300 size. It was way too big for my motor. Called and got a return from Amazon. Took 10 seconds at the UPS store to return and get refund posted. I ordered the 115-225 model and it fits very well. Just "snug" enough to take a moment or two to put on. Cinch strap needs a little effort to tighten but works well. Have not taken the boat out yet to see how is trailers. Well made though.
Scritto da: Matt N
Great product. Seems well made and fit my motor perfectly.
My old motor cover ripped, so I dreaded buying a new one since my last one was $180. I wasn't expecting much when I bought this one, but when I received it; I was pleasantly surprised. It's made very well, fits my motor perfectly and kind of makes me mad that I spent $180 on my last motor cover. It's a great cover and seems like it'll last some years. My boat stays in the water and the motor sees the morning sun, so two to three years is great if this cover lasts that long. For people looking at fitment.....my motor is a 2008 Mercury 175 optimax pro sx
Scritto da: Dale
Durability and fits great.
Seems durable and fits my 150hp great.
Scritto da: Sheldon J. Howe
Excellent fit for a Yamaha Vmax 150 HP
This cover fit my Yamaha Vmax 2 stroke 150 HP engine perfectly with some room to spare. I really like the material quality...looks like it will last a long time. I also really like the strap and buckle system. There is plenty of adjustment to tighten in down onto any sized motor...one side of the buckle is fixed and you just pull the strap on the other side and it tightens up as tight as you want. Much better that the previous canvas cover I had which eventually degraded.
Scritto da: RB
Recommend size too tight on my Honda.
I can't comment on quality/durability yet as I just received the MW1-225 cover this week, but it fits my 2016 Honda 150hp motor so tight that I thought I was going to have to send it back, and if it shrinks at all it will not come off in the spring! Honda outboards seem to be larger than other brands with the same hp, so I would order the WM1-300 for a 4 cycle 115 or 150 Honda. The cover does seem to be well constructed.
Scritto da: Das Dewayne
Excellent protection for 3.5 years
The cover lasted 3.5 years before the first rip appeared on the top. The material now feels thinner than when new. I used this cover on a Yamaha 150 in partial shade in Florida, probably removing it and putting it on again ~30 times. It fades from the grey color to whitish. The engine cover plastic snaps that tighten around the base of the cover seem healthy after 3.5 years. For reference, the original boat cover which is 15 years old, is in better shape than the engine cover, but was much more expensive.
Scritto da: Janice S.
Excellent Quality Cover
It’s difficult to select a size so reading these comments helped me. It fits small, so if your motor is at the top end of the size range, consider going up a size. The 115-225 hp size fits our 2018 Yamaha 115hp perfectly. The strap is very sturdy and cinches it on snugly, so it won’t come off. Very happy with this purchase.
Scritto da: Albert D.
Measure engine before ordering don’t go by HP good quality and workmanship
I have a 200 HP Suzuki and the 115-225 HP cover was too small and had to be returned. I ordered the 225-300 HP Cover which was a quick delivery and fits great. No issues on returning the product. The 0-25 HP cover fits a little large on the 9.9 HP Suzuki and has to be altered. Hope this helps
Scritto da: Joni
Order a size larger as others have suggested.
Glad I ordered the larger sized cover- fit with ease. Well made. Double stitched, good closure clasps. Wish it was a bit longer (length) but thus works!
Scritto da: Don Bilyk
Very good product
Very happy with this purchase. It fit the motor perfectly and the straps cinched it up tight. High winds did not affect it in the least!
Scritto da: Fran Sartison
Fits on the smaller suze
Quality is great

Verwandte Produkte

hot
Taylor Made Products, Abdeckung für Offshore-Fischerboote, Mittelkonsole, Trailerite, Innen-/Außenbord, 19'5 - 20'4 Mittellinienlänge x 102 Breite, Jägergrün
0.1/5

€ 738.40

Taylor Made Products, Abdeckung für Offshore-Fischerboote, Mittelkonsole, Trailerite, Innen-/Außenbord, 19'5 - 20'4 Mittellinienlänge x 102 Breite, Jägergrün
0.1/5

€ 738.40

hot
Classic Accessories StormPro 12 Fuß robuste Kajak-/Kanu-Abdeckung, 12'L (Modell A)
3.2/5

€ 124.14

Classic Accessories StormPro 12 Fuß robuste Kajak-/Kanu-Abdeckung, 12'L (Modell A)
3.2/5

€ 124.14

hot
Survivor Marine Products Bootsabdeckung Daycruiser, Innenbord-/Außenbordmotor 18' 5 - 19' 4 Länge, 89 Breite Hunter Green
0.1/5

€ 521.29

Survivor Marine Products Bootsabdeckung Daycruiser, Innenbord-/Außenbordmotor 18' 5 - 19' 4 Länge, 89 Breite Hunter Green
0.1/5

€ 521.29

hot
Classic Accessories StormPro Hochleistungs-Bootsabdeckung 12'-14' x 68 W
3.5/5

€ 177.77

Classic Accessories StormPro Hochleistungs-Bootsabdeckung 12'-14' x 68 W
3.5/5

€ 177.77

hot
Klassisches Zubehör Stellex Boot im Mittelkonsolenstil mit T-Top-Dach, 20'-22'L 20'-22'L x 106W (Breite)
3.1/5

€ 503.60

Klassisches Zubehör Stellex Boot im Mittelkonsolenstil mit T-Top-Dach, 20'-22'L 20'-22'L x 106W (Breite)
3.1/5

€ 503.60

hot
Classic Accessories Bootsabdeckung, verstellbare schwarze Stützstange, 12–54 H, verstellbar, schwarz, Bootsabdeckung, verstellbare schwarze Stützstangen, Bootsabdeckungsstütze
2.2/5

€ 52.04

Classic Accessories Bootsabdeckung, verstellbare schwarze Stützstange, 12–54 H, verstellbar, schwarz, Bootsabdeckung, verstellbare schwarze Stützstangen, Bootsabdeckungsstütze
2.2/5

€ 52.04

hot
Classic Accessories Stellex Ganzjahres-Bootsabdeckung, passend für Boote mit 14'-16' L x 90 W, 14'-16'L x 75 W (Breite)
3.5/5

€ 129.11

Classic Accessories Stellex Ganzjahres-Bootsabdeckung, passend für Boote mit 14'-16' L x 90 W, 14'-16'L x 75 W (Breite)
3.5/5

€ 129.11

hot
Survivor Marine Products Bootsabdeckung für V-Rumpf-Bugfahrer im Euro-Stil (Außenbordmotor), Hunter Green, 24 Fuß 5 Zoll – 25 Fuß 4 Zoll Gesamtlänge x 102 Zoll Breite
0.1/5

€ 827.55

Survivor Marine Products Bootsabdeckung für V-Rumpf-Bugfahrer im Euro-Stil (Außenbordmotor), Hunter Green, 24 Fuß 5 Zoll – 25 Fuß 4 Zoll Gesamtlänge x 102 Zoll Breite
0.1/5

€ 827.55

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array

Gesamt:€ 0.00

Siehe WarenkorbKasse

Kategorien

Alle Kategorien
Speisekarte Kategorien Nahe Wagen

Menu