Einstellbarer Drahtanschlag und Messgerät für Katapult-Abisolierzange Klein Tools 11081

Brand:Klein Tools

3.3/5

25.06

Ob auf einem kurvenreichen Weg, beim Schneeräumen oder tief im Schlamm, eine zuverlässige Winde ist das wichtigste Zubehör, das ein Fahrer haben kann. Rüsten Sie Ihr ATV, UTV oder SxS mit einer KFI-WINDE aus und seien Sie sicher, dass Sie sich aus jeder Situation befreien können. Diese 2500-Pfund-Seilwinde der ATV Assault-Serie verfügt über ein synthetisches Kabel, einen Kabelhakenstopper, ein dynamisches und mechanisches Bremssystem, wasserfeste Dichtungen zum Schutz vor den Elementen, ein standardmäßiges 4-Loch-Montagedesign und eine robuste Ganzmetall-Drehkupplung. Es ist außerdem durch eine zweijährige eingeschränkte KFI-Garantie abgesichert. Die KFI AS-25 Assault Winch wird mit allem geliefert, was Sie außer einer ATV-modellspezifischen Windenhalterung benötigen. Im Lieferumfang sind alles Gezeigte sowie ausführliche Installationsanweisungen und Hardware zur Montage Ihrer Winde an einer modellspezifischen ATV-Windenhalterung enthalten.

Ecoat-Finish zum Schutz vor Rost. Ersatzteil, damit die Werkzeuge weiterhin wie neu funktionieren. Hält das Kabel sanft an Ort und Stelle für präzises Schneiden. Hilft beim einfachen Schneiden und Abisolieren von Drähten. Zur Verwendung mit den Katapult-Abisolierzangen/-schneidern (Kat.-Nr. 11063W und 11063MET).
Batteries Included? ‎No
Batteries Required? ‎No
Brand Klein Tools
Country of Origin ‎Taiwan
Customer Reviews 4.2 4.2 out of 5 stars 52 ratings 4.2 out of 5 stars
Grip Type Ergonomic
Included Components ‎11081
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3 x 3 x 3 inches
Item model number ‎11081
Item Package Quantity ‎1
Item Weight 0.16 Ounces
Item Weight ‎0.16 ounces
Manufacturer ‎Klein Tools
Material Metal
Material ‎Metal
Part Number ‎11081
Product Dimensions ‎3 x 3 x 3 inches

3.3

12 Review
5 Star
56
4 Star
29
3 Star
3
2 Star
5
1 Star
7

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Ross W.
Makes life really easy
Adding the stop to the wire stripper makes it very easy when working with GFCI's or using the new push-in wired nuts that require a specific depth. With traditional wire nuts it makes getting everything stripped to a consistent depth very easy. Same with connecting to outlets screws.
Scritto da: Jesu
Quality part by Klein
Quality is as good as it gets, knurling is good quality, as is the plastic used. The clear plastic is quite thick and should hold up well.
Scritto da: lesvance
Great addition to the Katapult wire stripper
I've gone through my entire life stripping 12ga wire with a jack knife. had to wire a new stable for some friends of mine. Getting the strip-length right was a piece of cake. But you still have to be careful about nicking the conductor.
Scritto da: Jordan Simpson
Klein Tools should include this when buying Katapult.
I have been using Klein Katapult since the year 2011. Only recently I learned this depth gauge has always been available. Don't know how I got by without it. Magnifies seeing the wire too while placing in correct strip hole.Overall build quality could be better but I like it anyhow. Shipped and delivered on time.
Scritto da: Peter H
Ludicrously overpriced, poorly designed
The Klein Katapult should include a depth stop as standard. This is a ridiculous amount of money for two small screws and a piece of plastic. The stop is not well designed - it is obviously a kluge that was added on later. The plastic part rotates freely on the rod, so you have to make sure it is square as you tighten the lock screw. The stop goes all the way down to zero strip length, which is obviously useless; as a result, you have reverse the stop on the rod to get longer strip lengths. There is no way to flip the stop out of the way for a one-off strip of an odd length. The rather crude built-in (and therefore free) stop on the Irwin stripper is better. No instructions are provided; you have to deduce that you must remove one of the existing screws from the Katapult and replace it with the rod.
Scritto da: Kindle Customer
Mine cracked and became useless after a few resets to different lengths
The screw needs to be tightened very tight for the stop to stay in place. Otherwise the stop slides slightly with each use of the stripper and the adjustment is lost. Mine cracked and became useless after a few resets to different lengths. This should have been a metal part instead of plastic.
Scritto da: Scott L.
Great idea, but the attachment screw not the correct size
I love my stripper. And I love the idea of this wire stop gauge. However the attachment screw is not the correct size and after some use, the screw simply strips out of the tool. The threads inside the tool itself are fine, but the attachment screw threads will not hold this wire stop gauge. It is very frustrating. I called Klein to see if they will replace or even just fix the new parts that they make. We'll see what they do. Again, love the tool and idea, but the execution is quite poor.
Scritto da: mojobill
A little flimsey
A little flimsey, plastic cracked 1st week. Should be all metal maybe?
Scritto da: Felipe Reding
Muy útil (Compra varios...)
Muy útil para cuando tienes que desforrar múltiples cables a una misma longitud; por ejemplo cuando vas a instalar todos los apagadores/contactos de una misma marca en una casa. El tope es de plástico, así que no esperes que soporte el abuso y el maltrato, de cualquier forma como no es un producto caro, recomiendo comprar varios de una sola vez para irlos reemplazando cuando se dañen. La relación costo/beneficio es muy buena
Scritto da: mekeni
Build a all metal parts just like the original design.
Very poor plastic material lasted only for few days a combination of metal and sub standard plastic parts is bad idea.
Scritto da: TDM
Improper screw size
Improper screw size
Scritto da: Amazon Customer
Five Stars
must have add-on for klien katapults

Verwandte Produkte

hot
WEICON Mini-Duo Nr. 150 Stripper
3.8/5

€ 69.20

WEICON Mini-Duo Nr. 150 Stripper
3.8/5

€ 69.20

hot
WEICON Quadro Stripper Nr. 16
3.5/5

€ 59.36

WEICON Quadro Stripper Nr. 16
3.5/5

€ 59.36

hot
DEWALT DCE15113 4/0 THHN&XHHW CU-Buchse
4.1/5

€ 74.44

DEWALT DCE15113 4/0 THHN&XHHW CU-Buchse
4.1/5

€ 74.44

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array