Enerlites MPC-52V PIR-Deckensensor, Decken-Präsenzsensor, Deckenlichtsensor, Präsenzsensor, kommerzielle Qualität, 360-Grad-Sichtfeld, 800 m². Fußabdeckung, 120–277 VAC, Weiß

Brand:ENERLITES

3.2/5

66.38

360-Grad-Passiv-Infrarot-Präsenzmelder für die Deckenmontage in Handelsqualität mit Bewegungserkennung. Der Deckensensorschalter schaltet das Licht automatisch ein/aus, wenn eine Bewegung erkannt wird. Sparen Sie Geld bei den Stromrechnungen, indem Sie Enerlites MPC-52V installieren, da die Installationszeit von 45 Minuten auf 10 Minuten verkürzt wird. Für dieses Produkt ist keine Deckendose erforderlich. Enthält zwei kostenlose Objektive, darunter eines für den näheren Bereich, das empfindlicher auf Bewegungen reagiert, und eines für größere Entfernungen mit geringerer Empfindlichkeit. Um diese Deckenleuchte mit Präsenzmelder zu installieren, bohren Sie einfach mit Ihrem Schraubendreher ein Loch in die Decke, setzen Sie die Rückplatte in das Loch ein, führen Sie dann die Drähte durch und schließen Sie sie an. Die Deckenleuchte eignet sich ideal für den geschäftlichen oder gewerblichen Einsatz aus Gründen der Bequemlichkeit, Energieeffizienz, Sicherheit und Überwachung. Anpassung: • Einstellbare Zeitverzögerung: 15 Sek. - 30 Minuten. • Empfindlichkeitseinstellung: 50 % / 100 % Spezifikationen: • Mehrstufige 360°-Fresnel-Linse für hervorragende Belegungserkennung • Abdeckung: 360°-Sichtfeld; 800 Quadratfuß Abdeckung • Betriebstemperatur: 32° bis 131°F (0° bis 55°C) • Glühlampe 800 W bei 120 VAC, 60 Hz • Leuchtstofflampe 800 VA 277 VAC, 60 HZ • Motor: 1/4 PS, 120 VAC, 60 HZ • Kabelbezeichnung: Heiß, Neutral, Last • Passive Infrarot-Technologie, PIR-Bewegungssensorschalter • Steuert Glühlampen, Kompaktleuchtstofflampen und LED-Beleuchtung. • UL-gelistet

Die Deckenhalterung für den Präsenzmelder ist UL-gelistet, Glühlampe: 400 W bei 120 V Wechselstrom; Leuchtstofflampe: 800 VA bei 120 VAC, 1200 VA bei 277 VAC; Motor: 1/4 PS bei 120 VAC. Betriebstemperatur (32 – 131 °F), keine Deckenbox erforderlich. Mehrstufige Fresnel-Linsen: Der Deckensensor enthält zwei austauschbare Linsen für unterschiedliche Empfindlichkeitsstufen. Passen Sie es an, um die besten Ergebnisse zu erzielen. Vollständiges 360°-Sichtfeld mit Fresnel-Linse, das bis zu 800 Quadratfuß abdeckt. Konzipiert für eine Deckenhöhe von ca. 8–10 Fuß. Kommerzielle Qualität, ideal für Unternehmen und Gewerbeimmobilien. Der Deckenbewegungssensor kann zur einfachen Installation direkt an der Leuchte oder Decke angebracht werden. Bohren Sie einfach ein Loch in die Decke und führen Sie dann die Verkabelung durch. Dadurch verkürzt sich die Installationszeit um 30 Minuten. Der an der Decke montierte Präsenzmelder nutzt Passiv-Infrarot-Technologie (PIR), um das Licht automatisch einzuschalten.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ENERLITES
Brand ‎ENERLITES
Certification ‎UL
Color White
Color ‎White
Customer Reviews 4.2 4.2 out of 5 stars 76 ratings 4.2 out of 5 stars
Included Components ‎MPC-52V
Is Discontinued By Manufacturer ‎No
Item model number ‎MPC-52V
Item Package Quantity ‎1
Item Weight 0.01 Ounces
Item Weight ‎0.01 Ounces
Manufacturer ‎Top Greener Inc
Maximum Range 10 Feet
Maximum Range ‎10 Feet
Mounting Type ‎Ceiling Mount
Part Number ‎MPC-52V
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎5.1 x 4.3 x 4.4 inches
Switch Style ‎Temperature Switch
Wattage ‎400 watts

3.2

9 Review
5 Star
58
4 Star
23
3 Star
7
2 Star
3
1 Star
10

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Circle C
Great Instructions
What impressed me the most was the completeness of the instructions and each wire was clearly marked in layman's terms. I also like that you don't have cut a 4" hole to install it. The unit has three main components. The base, the sensor and electronics, and the cover. I plan on ordering another one for my office which has the wall switch inconveniently placed behind one of the French doors making a switch mounted sensor unusable.
Scritto da: Casual Reviewer
Watch out for the lenses in the box
I installed it in a room with an 8ft ceiling and I had to walk almost directly below it for it to work. UPDATE after a couple hours of research.... Frustrated at the prospect of returning a device I just bought and installed, I began reading about passive infrared technology on my phone in the dark room I was trying to automatically light up. In my research I found an article mentioning how a fresnel lens (the jewel shaped lens on the cover) helps with the sensitivity of the devise because it divides the field of view into zones that the detector can monitor. I then remembered seeing when I unpacked the box, a spare lens inside and thought it odd for them so supply one. To try my luck, I took the lens that was mounted on the cover and compared it to the spare one and to my amazement saw that the interior face of the spare lens was much more textured. To try my luck I swapped them out and all my problems went away. The instructions do not make any mention of this so I am not sure if they indeed supply lenses with two sensitivities or whether one was defective. I give it 5 stars for working as advertised minus 1 for either poor documentation or providing defective lenses.
Scritto da: Robert L Klawuhn
Easy to install and works well.
It seems to be very sensitive. Maybe too much sensitivity for a small porch, even at the low setting. But it works great and was simple to install.
Scritto da: A. Adams
Failed in less than one week of actual use
Update: Failed just one day after my return window closed. At around 2AM in the morning it started turning on and off repeatedly without any trigger. One day later fails to register any motion. Will now have to follow up on the two year warranty but i'm not holding my breath... Typical passive infrared (PIR) occupancy sensor that is easy to set up and wire. Adjustable time settings are 15 seconds, 5 minutes, 10 minutes, 20 minutes, and 30 minutes. Really wish they had 1 minute as 15 seconds is too short and 5 minutes is much too long. Didn't test the ambient light settings that much (cool feature that won't turn on the lights if the sensor detects enough ambient light). Did change the sensitivity down to 50% (either 50 or 100% sensitivity). The kit included another lens and some pie shaped stickers so that you could 'blind' the sensor to certain unwanted triggers (IE sunlight, window, adjacent space, heater vent, etc). The wiring has a black (hot) neutral (white) and red that goes to the load. Underneath the cover they have two screw holes or you can use the threaded nut connection and washer to affix the stem on the backside through a material such as drywall or plywood. Conveniently the stem also has some thread for 1/2" flexible conduit so no adapter would be needed just in case the application required conduit. Literature lists a two-year warranty. Using this sensor in a walk-in closet for hands free activation and no worry automatic shut off.
Scritto da: Amazon User
Easy install.
So far so good. Turns on when you expect. I use it for a closet and the range is perfect. It has multiple time and light settings. Also includes tape pieces to mask from detecting unnecessary movment. I bought it because I could mount it without requiring additional install of junction box. Keep in mind you still need access to ceiling to tighten nut that holds it against drywall. So don't place too far from light fixture. Looks nice and clean.
Scritto da: Jeff
Excellent solution for ceiling sensor
This ceiling mounted infrared motion sensor works as described and is well made. Although it appears to be designed for suspended ceiling applications, I was able to install this in an existing sheetrock ceiling to control a ceiling fixture in a hallway. I used an old work ceiling box and a cover plate because the size of this sensor did not match with any old work box that I could find readily. This unit has been performing flawlessly for several weeks now. UL listing is a plus.
Scritto da: Fab.
works ok
But needs adjustment, change of the cap head depending of your configuration otherwise you need to be right under for it get triggered.
Scritto da: ronald rorick
works great
i use it for a bathroom and its work great
Scritto da: Cam Summerfeldt
Not a direct fit for standard ceiling boxes.
Great operation but not typical mounting style or size. Extra trim pieces will need to be made or purchased.

Verwandte Produkte

hot
Lutron Maestro Bewegungssensorschalter
3.7/5

€ 61.70

Lutron Maestro Bewegungssensorschalter
3.7/5

€ 61.70

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array