GEARWRENCH 2-teiliger 1/4-Zoll- und 3/8-Zoll-Antrieb 120XP Flexkopf-Teardrop-Ratschensatz, Dual-Material – 81204P

Name: GEARWRENCH 2-teiliger 1/4-Zoll- und 3/8-Zoll-Antrieb 120XP Flexkopf-Teardrop-Ratschensatz, Dual-Material – 81204P
Brand: GEARWRENCH
SKU: 787721785200
Price: 156.20 EUR
Availability: InStock

Brand:GEARWRENCH

3.9/5

€
156.20

Die Double Stacked Pawl-Technologie der GearWrench 120XP-Ratschen bietet Ihnen 120 Positionen bei jeder vollen Umdrehung und einen extrem engen 3-Grad-Schwenkbogen, um Bolzen dort zu drehen, wo andere dies nicht können. Dank des flexiblen Kopfdesigns gibt es nicht viele Stellen, an die diese Ratschen nicht gelangen können. Mit der legendären Geschwindigkeit und Stärke von GearWrench sind sie äußerst produktive Werkzeuge. Unsere bisher besten Ratschen vom Marktführer für Handwerkzeuginnovationen.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 787721785200

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Handwerkzeuge, Schlüssel, Steckschlüssel,

Erfüllt oder übertrifft die ASME-Spezifikationen. Komfortgriff aus zwei Materialien. Die glänzende, vollpolierte Chromoberfläche lässt sich leicht abwischen und ist korrosionsbeständig. Griff mit größerer Reichweite für den Zugang zu schwer zugänglichen Befestigungselementen. Gut sichtbare Markierungen am Kopf. Geschlossenes Kopfdesign für extremen Widerstand gegen das Eindringen von Schmutz. Der flexible Kopf ermöglicht den Zugang zu schwer zugänglichen Befestigungselementen. Doppelt gestapelte Sperrklinken greifen abwechselnd in das 60-Zahn-Zahnrad ein und sorgen so für außergewöhnliche Festigkeit. 120XP-Ratschen verfügen über zwei doppelt gestapelte Sperrklinken mit 60 Zähnen (120 Positionen), die einen Schwenkwinkel von 3° ermöglichen, sodass Sie Befestigungselemente auf engstem Raum drehen können.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Bright Chrome Finish
Country of Origin	‎Thailand
Customer Reviews	4.8 4.8 out of 5 stars 1,256 ratings 4.8 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Full Polish Chrome
Head Style	‎Teardrop
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎81204P
Item Package Quantity	‎1
Item Weight	‎1.54 pounds
Manufacturer	‎GearWrench
Material	‎Alloy Steel
Measurement System	‎Inch
Number of Handles	‎1
Part Number	‎81204P
Pattern	‎Ratchet Set
Product Dimensions	‎18.03 x 5.04 x 1.57 inches
Size	‎1/4" & 3/8" Drive
Style	‎2 Pc Flex Head Cushion Grip
Usage	‎Professional
Warranty Description	‎Standard Limited Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: J. Smith

Five stars after five years in a shop.

Used regularly and with malice for five years, finally broke the 1/4" yesterday, the 3/8" seeps some grease out and the switch is starting to stick a little. But for what they've been through very satisfied overall and I'm ordering again without shopping around.

Scritto da: Jason Sparrow

Yep.

I bought these a long time ago and am just now getting to the review. They're awesome, the motion is super fine, and I abuse them heavily and daily, and they love it. Buy them.

Scritto da: Michael A Gianino

Amazing set! Daily use

The only problem I have with this set is that they are yellow and not red, but this is an amazing set

Scritto da: Joe

Great quality

This set (3/8 & 1/4) comes with a convenient EVA foam storage tray. Very nice set. I’ve not used the product for long but feel there’s a good deal of flex at the pivot point, thus, the hit on durability in my rating. However; there’s a lifetime warranty so… can’t complain.

Scritto da: sara dale

Good to bridge the gap between cheapo and tool truck.

The 3/8 ratchet is amazing. After hard use breaking caliper bolts, suspension, etc i havent broken any teeth or had any mechanical issues. This tool gets tossed on the floor, ran over, and soaked in solvents and oil. Never had an issue. Only downfall is the detent for the flex head can be a little weak so it will flop over but not a huge issue. Not nearly as bad as the snap on detentless flex heads. Im surprised the handle hasnt chipped, fallen off, or started to peel even after being ran over on the alignment rack by trucks multiple times. Overall the 3/8 ratchet is great. Now for the 1/4. Mine is very crunchy and the head is too big to be used as a primary 1/4 ratchet. Also the flex detent makes it awkward to use in tight spaces. Honestly i never use this ratchet for those reasons. If you can get just the 3/8 by itself id strongly recommend getting that and investing into a good 1/4 ratchet.

Scritto da: Keith

Satisfied thus far.

I've been using this semi-professionally (Technical school 3 to 4 times a week usually) for about half a year now which feels long enough to me to reasonably comment on them. No problems with wear thus far, but it's not been truly long term though so I'd still consider it more 'no obvious and immediate issues'. I like them both allot, the small swing to engage really helps and it's nice and smooth, head is pretty thin too which is nice. As for the flex head personally I like the detents to hold it, yeah it's not as 'infinitely' adjustable, but it's probably less likely to get sloppy overtime and truthfully the increments it has are going to cover 99% of use cases anyway. When it pops in it really holds the angle, I much prefer it personally. I saw one guy claim you can't move it easily while working, but frankly he must have the weakest fingers know to man, the engagement is positive, but not heavy and it's trivial to pivot it between the positions while it's on a bolt. Handles I'm kinda conflicted on. The rubber is definitely is easier to get a solid hold on and slips less, but that goes hand in hand with it collecting gunk and being obviously less durable then chrome. Overall I think I still prefer the rubber though. This specific one is nicely shaped and seems to be holding up well so far to having been dunked in several types of fluids as well as the usual wear and tear. Both the ratchets in this set are pretty long, the 3/8th in particular, that can be good or bad depending on the task ,but the 3/8th is big enough to sometimes be obstructive, but on the other had that big handle gives you lots of leverage. Still if this was going to be like your one 3/8th ratchet I'd look at something a few inches shorter. The 1/4th is I'd say slightly longer then average too, but less so, honestly in it's case I mostly find it a benefit, quite a few 1/4th are so stubby I often find it hard to get much leverage on them in any kind of awkward position. Edit: Checking in with no over a year of daily professional use as well, still holding up fine though the 3/8th is missing a chunk of rubber now from when I stupidly got it pinned trying to use it on a idler. Consider that a point in it's favor though, it took a ton of force to get it back loose, but it kept on trucking.

Scritto da: Juan

Use them every day

They're still in great shape and I've used them for all sorts of tasks around the shop

Scritto da: Dustin

3/8 Drive Ratchet failed on me

Initially I really liked these ratchets. Unfortunately as soon as I started to use the 3/8 ratchet, it will automatically reverse in use. I made sure that I wasn't bumping the lever. Somehow the ratchet just reverses itself quite often so I no longer use this ratchet. Maybe when I have time I'll have to take it apart to see if there's anything wrong inside.