Jackson Sicherheits-Schweißhelm, leicht, langlebig, flexibel, fester Schirm W10 HLX schützende Schweißer-Gesichtsmaske mit schwarzer Schale für Männer und Frauen, Heavy-Metal-Grafik, 20508

Brand:Jackson Safety

3.6/5

130.03

Wenn Sie einen einfachen Schweißhelm zum Schutz Ihrer Augen und Ihres Kopfes benötigen, aber nicht auf Komfort verzichten möchten, ist der Jackson Safety Schweißhelm mit festem Schirm (W10 HLX) die beste Wahl. Es verfügt über eine ultraleichte Schale, die nur 6 Unzen wiegt und so dazu beitragen kann, Nackenverspannungen zu reduzieren. Die aus Hydraflex gefertigte Schale bietet ein Höchstmaß an Flexibilität und Haltbarkeit und ist mit 187-S (Jackson Safety-Code 15968) sogar an Schutzhelme anpassbar. Apropos anpassungsfähig: Es ist auch ADF-kompatibel mit den automatischen Verdunkelungsfiltern NexGen, TrueSight II, Professional Variable und Insight von Jackson Safety. Es erfüllt die ANSI Z87.1-Standards und ist CSA Z94.3-konform, sodass Sie sich darauf verlassen können, dass Sie es zum Schutz beim Schweißen wählen. Es ist so leicht und bequem, dass es Ihnen nichts ausmacht, es über einen längeren Zeitraum zu tragen. Der Jackson Safety W10 HLX ist in verschiedenen Grafiken erhältlich, darunter auch in dieser Variante: Heavy Metal. Es handelt sich um eine intelligente Schweißhaube für Studenten, Hobbyschweißer, Profis und Inspektoren, die den Schutz erhält, den sie für ihre Sicherheit benötigen. Jackson Safety wurde 1933 gegründet und hat sich einen jahrhundertealten Ruf als Lieferant der innovativsten Sicherheitslösungen in der Schweiß- und persönlichen Schutzausrüstungsbranche aufgebaut. Wenn es um die Bereitstellung von Sicherheitslösungen mit dauerhaftem Wert, Haltbarkeit und Komfort geht, hat Jackson Safety Maßstäbe gesetzt. Ganz gleich, ob Schweißschutz in einer Stahlfertigungsumgebung, Kopfschutz auf einer Baustelle oder Gehörschutz auf einem Flughafen benötigt wird, Jackson Safety bietet die größte Auswahl an Sicherheitsoptionen, um den Anforderungen jedes Arbeitsplatzes und jedes Arbeiters gerecht zu werden.

Keine Einheiten verfügbar
SICHERHEITSZERTIFIZIERUNGEN – Dieser Helm bietet Schutz für Gesicht und Augen des Benutzers beim Schweißen; Es ist effizient und wirtschaftlich, erfüllt die ANSI Z87.1-Standards und ist CSA Z94.3-konform. SMARTER SCHUTZ: Dieses Modell ist in verschiedenen Grafiken erhältlich und verfügt über unser erstklassiges 370 Speed ​​Dial-Kopfbandsystem mit einfachem Griff und Drehung. Es handelt sich um eine intelligente Schweißhaube für Studenten, Bastler und Profis. ENTHALTENE KOMPONENTEN: Der passive Schweißhelm W10 HLX von Jackson Safety wird komplett mit Abdeckplatte und Polycarbonatfilter der Schutzstufe 10 geliefert. ANPASSUNGSFÄHIG: Der Schutzhelm ist mit 187-S anpassbar und der ADF ist mit den automatischen Verdunkelungsfiltern NexGen, TrueSight II, Professional Variable und Insight von Jackson Safety anpassbar. LANGLEBIGES DESIGN: Dieser Jackson-Sicherheitsschweißhelm verfügt über ein langlebiges, leichtes Design, das nur 6 Unzen wiegt, um Nackenverspannungen zu reduzieren. Die Hydraflex-Schale bietet ultimative Flexibilität.
Brand Jackson Safety
Color Black
Country of Origin China
Is Discontinued By Manufacturer No
Item model number 20508
Item Weight 0.01 Ounces
Manufacturer SureWerx
Material Metal
Product Dimensions 865 x 10.9 x 15.5 inches; 0.01 Ounces
Style Modern

3.6

11 Review
5 Star
77
4 Star
11
3 Star
3
2 Star
4
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Paige Ray
Comfy.
The fit and finish of this helmet is great. I just wish Jackson included a better lens. It's not bad, its just basic and not awesome for TIG. Helmet got dinged 1 star because the cost has gone up significantly over the past 3 years.
Scritto da: Konrad976
Great basic hood.
Love the headgear.
Scritto da: Ryan
Light, comfortable
This has became my favorite welding hood. I woke 10 hour shifts and it’s durable, comfortable, and clear.
Scritto da: TerryP
Works, with some adjustments
I've welded before, but it's been several years, so I'm having to get new equipment. Some of the new gear is very cool, so I decided to step up into the new world. Probably should have done some more research before making that step. The first thing I purchased was a plasma cutter/mma/TIG welder, followed by a nice True Sight II. Didn't realize that the Truesight II was an insert, not a helmet. My research showed me that the insert fit in a Jackson helmet. Getting a Jackson helmet was necessary because I'd purchased a Jackson Truesight II insert which I thought was compatible with any helmet. Not true. Anyway, I bought this helmet to accommodate the Truesight II. The good: After a bit of fumbling around, the helmet did accommodate the Truesight II, which is important, and a major consideration. The not so good: When I received the helmet, it tipped up enough to clear my chin, but not enough to see the work on the table. I had to reconfigure the headgear mounts to allow the helmet to move. Don't know if I get the mounts back in correctly, but at least I can raise and lower the helmet to weld and handle my work pieces. Bottom line, not bad, but annoying to have to reconfigure right out of the bos.
Scritto da: Tyler Edwards
Love the hood!
Very comfortable for clocking a lot of hood time, never gets heavy. I do wish it didn't feel so flimsy however I know that would add weight. You take to good with the bad I guess.
Scritto da: Hordur Arnarson
Great helmet for the money.
I got sick and tired of my auto-darkening big brand name helmet flashing my eyes while doing low amperage Tig welding. Got this bad boy with some quality gold coated glass and it works great. Much lighter than my auto darkening helmet and the ratcheting mechanism gives good action when you flip the hood down before striking the arc. The only thing I'm changing is that the shade 10 glass is a smidgeon dark for my taste during the sub 100-amp Tig welding (I'm working on 14 ga. stainless steel exhaust tubing) so I just got a shade 9 and an 8 to see what fits best. But the hood is solid!
Scritto da: R. L. Williams
Decent welding hood
I purchased this hood for welding at home, and for the most part it's exactly what I expected. Unfortunately the plastic snaps for the crown adjustment don't stay put, and I had to tape that band so it wouldn't unsnap when raising or lowering the hood. I also replaced the plastic shade 10 lens with a glass shade 9, but I knew I would do that going in. Overall, I like the hood.
Scritto da: TigerDaddy
Amazing...
I had no idea that this helmet was charcoal grey metallic. This dude looks awesome. The head strap is what you're really paying for and it is the best you can get. Together I was taken back. What I got and what I payed for has got me scratching my head. The full face glass is so much better than that auto darkening crap I bought 5 years ago. Amazing....
Scritto da: Amazon Customer
Was only shipped one hood.
Gold lens is absolutely awesome. Jackson headmount is damn comfy and hood is lightweight. 3 stars given because the ad states there are two in the case. Was only shipped a single hood. Will edit ad to 5 stars if this is corrected.
Scritto da: Mario Garcia
Producto original
The media could not be loaded. Exelente producto un poco tardado el envio pero todo muy bien
Scritto da: stephane
Horrible
Colis en retard aucun detail a jour suite a letiquette créé, vendeur pas fiable

Verwandte Produkte

hot
Trueview PANO Schweißhelm
3.2/5

€ 453.49

Trueview PANO Schweißhelm
3.2/5

€ 453.49

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array