KLEENGUARD – 18629-OB V90 „The Shield Schutzbrille mit Gesichtsschutz (18629), klare Antibeschlag-Linse mit blauem Rahmen, (6 Stück)

Brand:KLEENGUARD

2.6/5

80.17

Persönliche Schutzausrüstung (PSA) von KleenGuard ermöglicht statt zu behindern – und ermöglicht so maximale Produktivität und Sicherheit für Sie und Ihre Mitarbeiter. Wenn Sie eine Aufgabe bewältigen müssen, bei der herumfliegende Partikel oder Spritzer auftreten, reicht das Tragen einer Schutzbrille nicht aus. Schützen Sie sich mit der KleenGuard V90 Shield Schutzbrille mit Gesichtsschutz. Es ist wirklich so, als hätte man zwei Produkte in einem, da sich die Gesichtsschutzmaske von der Spritzschutzbrille abnehmen lässt. Zusammen bieten sie Augen- und Gesichtsschutz vor Flüssigkeiten und Partikeln, ohne den Aufwand eines primären Augenschutzes unter einer Gesichtsschutzmaske. Die Schutzbrille verfügt über eine indirekte Belüftung, die eine freie Luftzirkulation ermöglicht und gleichzeitig das Eindringen von Flüssigkeiten in die Augenpartie verhindert. Der Brillenteil verfügt über einen weichen, biegsamen Rahmen, der sich für Komfort an das Gesicht anpasst, eine zylindrische Linse für bessere Sicht und indirekte Belüftung. Sie passen über die meisten Korrektionsbrillen. Die Gesichtsschutzmaske ist gebogen, um sich der Gesichtsform anzupassen und zusätzlichen Schutz zu bieten. Der Shield verfügt über einen verstellbaren Riemen, damit Ihre Mitarbeiter bequem sitzen können. Es ist schwierig, die richtige Wahl für den persönlichen Schutz zu treffen. Führen Sie herausragende Leistungen mit der persönlichen Schutzausrüstung (PSA) von KleenGuard aus.

Keine Einheiten verfügbar
Eingebauter Scheibenkopf.
Brand KLEENGUARD
Color Clear
Department Unisex-adult
Frame Material Plastic
Is Discontinued By Manufacturer No
Item model number 18629
Manufacturer Kimberly-Clark Professional
Material Polycarbonate
Package Dimensions 13.31 x 10.35 x 7.68 inches; 1.17 Pounds
Special Feature Anti Fog, Adjustable

2.6

8 Review
5 Star
43
4 Star
10
3 Star
18
2 Star
14
1 Star
14

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Robert
Excellent goggles which are comfortable and include a safety shield. The shield can be removed following the instructions below
This safety shield is the best protection I have found for working in a machine shop where both wood and metal are being cut or machined. My glasses fit easily inside the goggles and what makes this combination shield so excellent is the design of the face shield. Unlike the ones I have used before, when you breath out, no fogging of the safety goggles occurs. At first I thought this was associated with the antifog coating, but I now believe it is due to closed design of the goggles coupled with the airflow design of the shield. When you breath out, all the air is forced down towards your feet. The goggles have a very clear window with no distortion. Putting the goggles on over glasses is easy, but I suspect if you have rally large lenses, it might not work. But thick lenses are no problem- mine are quite thick. Some reviewers have commented that it is nearly impossible to remove the shield from the goggles. It took me quite some time to figure out how to do this, as there are no directions included with the V90 to explain how to do this. I provide instructions below: First, notice that the shield is not flexible and is attached at the top edges by a very small plastic extension that fits into a hole in the goggles. Because the shield is not flexible, you need to do all your shape manipulation on the goggles while holding the shield motionless.. 1. With your left hand holding the edge of the goggles and your right hand holding the upper corner of the shield peal the flexible goggles away from the shield so that the plastic extension is released from its hole. 2. Carefully remove the center piece from the lip on the from of the goggles. 3. Carefully remove the plastic extension from the other side of the goggles without applying too much torque. What makes this tricky is that the plastic edge pins are easily broken off, so apply torque to them is dangerous. My guess is that the manufacturer did not intend for the user to ever remove the shield. But I have with a bit of practice learned to remove and replace it easily. It is simply a matter of doing it slowly and carefully the first time. I attach two pictures of the removed shield. The attachment pins are on the far left and right of the shield, and a closeup of the pin is provided in the second picture. Despite the lack of instructions, these are high quality goggles with a very comfortable safety shield attached. You can use them for two hours before they start to annoy you, which is for me true for goggles without a safety shield. Normal sized glasses fit comfortably inside the goggles which is very nice. These make working in a machine shop much, much safer.
Scritto da: Art Thompson
How could they make goggles so uncomfortable?
In general, I prefer full face protection whenever I am using power tools, especially metalworking. My favorite isUvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-fog Hard Coat , because it protects down below the chin. Conventional face masks have a nasty habit of allowing debris to bounce off of your work bench or chest,coming up underneath them onto your face. Still, it looked like these Jackson V90 goggles might be a good compromise in situations where you need full eye protection, but some additional shielding from the debris field would be good. You would not want to use these in a situation where fine particles such as metal chips could fly up under the mask. But that is all moot as these seem to be designed for someone without a nose. The frame and a lower protective portion of the mask are very strong and therefore not very flexible. The portion that fits around your forehead and cheekbones has some flex to it so it can form a seal. Unfortunately this area is not substantial enough to make up for the rigidness of the body. In order to get it to seal I have to set the strap extremely tight. And I have a decent size head - I wear a 7 1/2 hat. But what's worse, and totally unacceptable, is where it sits on the bridge of the nose. This area has virtually no flexibility at all -there is basically no place for your nose to go. I do not have a huge nose, but in order for these goggles to fit my nose they have to ride extremely high, practically hitting my lower eyelids. Wearing them any lower puts significant pressure on the bridge of my nose. Just to prove I'm not crazy, I gave a set to a friend with a perfectly normal face to try on. I did not prompt him at all with my opinion. He gave them back, saying "after 10 minutes my nose hurt". I bought a lot of goggles over the years and I never knew this could even be an issue. Strange.
Scritto da: millard stone
it said 6 pair, only got 1
i returned the Mask because i only got 1 instead of the 6 advertised. i guess im stupid, i returned 2 orders and reordered per the prompts. i still only have 1.
Scritto da: Bladed at 45
Not 6 pairs / pack as described
Description: KLEENGUARD - 18629-OB V90 “The Shield" Safety Goggles with Face Shield (18629), Clear Anti-Fog Lens with Blue Frame, 6 Pairs / Package / 6 per case. Drop shipper, Magid Safety, shipped only one. Returned for refund.
Scritto da: Patrick McDonald
this mask is as advertised
great fit and good seal around face
Scritto da: A R A Kay
Three Stars
Not fond of color, can't figure how to put the mask piece back after cleaning
Scritto da: Paul Perez
Four Stars
great fit
Scritto da: Kirk Hudson
Awesome face protection
Really like these mask great protecting face from any flying particles.

Verwandte Produkte

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array