Klein Tools KTSB15 Stufenbohrer Nr. 15, doppelt geriffelt, 7/8 bis 1-3/8 Zoll mit gut lesbaren Stufenmarkierungen und Zielen, 3/8 Zoll Sechskantschaft

Name: Klein Tools KTSB15 Stufenbohrer Nr. 15, doppelt geriffelt, 7/8 bis 1-3/8 Zoll mit gut lesbaren Stufenmarkierungen und Zielen, 3/8 Zoll Sechskantschaft
Brand: Klein Tools
SKU: 767654976111
Price: 98.48 EUR
Availability: InStock

Brand:Klein Tools

3.7/5

€
98.48

Diese doppelschneidigen Stufenbohrer ermöglichen ein schnelleres Schneiden und Bohren als einschneidige Bohrer. Die gut lesbaren Schrittmarkierungen und Zielmarken sparen Zeit beim Bohren von Löchern. Der dicke 3/8-Zoll-Sechskantschaft bietet einen festen, sicheren Halt und dreht sich im Bohrer nicht heraus. Seit mehr als 160 Jahren stellt Klein Tools hochwertige, professionelle Handwerkzeuge her, die die Leistung, Haltbarkeit und Präzision bieten, die für die ordnungsgemäße Erledigung der Arbeit erforderlich sind. Unsere Familie aus Ingenieuren, Arbeitern und Handwerkern steckt weiterhin sechs Generationen an Fachwissen in jedes von uns hergestellte Werkzeug, indem wir nur Materialien höchster Qualität, erstklassige Verarbeitung und eine möglichst heimatnahe Herstellung verwenden. Klein ist nicht nur der Name unseres Unternehmens, sondern auch unser Familienname. Und da wir ein amerikanisches Unternehmen sind, das sich in Familienbesitz befindet und von der Familie geführt wird, können Sie sich darauf verlassen, dass wir auch morgen hier sind. Klein Tools stellt nicht nur großartige Produkte her, wir stellen auch großartige Produkte her, die den Anforderungen der Profis standhalten, die sie täglich verwenden ... Seit 1857.

Keine Einheiten verfügbar

EAN: 767654976111

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Bohrmaschinen, Teile & Zubehör, Bohrer Bits,

3 Lochgrößen. Der dicke 3/8-Zoll-Sechskantschaft rundet sich nicht im Bohrfutter ab und sorgt so für einen besseren Halt. Gut sichtbare Silberziele für primäre Lochgrößen. Schnellstartende, nicht wandernde Bohrspitze. Zwei Rillen an diesem Stufenbohrer schneiden schneller und halten den Bohrer kühler.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Klein Tools
Brand	‎Klein Tools
Color	‎Black
Customer Reviews	4.7 4.7 out of 5 stars 1,701 ratings 4.7 out of 5 stars
Included Components	‎KTSB15
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	5.2 x 3.4 x 0.7 inches
Item Dimensions LxWxH	‎5.2 x 3.4 x 0.7 inches
Item model number	‎KTSB15
Item Package Quantity	‎1
Item Weight	‎6.8 ounces
Manufacturer	‎Klein Tools
Material	High Speed Steel
Material	‎High Speed Steel
Measurement System	‎Inch
Minimum Bore Diameter	‎0.63 Inches
Part Number	‎KTSB15
Product Dimensions	‎5.2 x 3.4 x 0.7 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎1-3/8-Inch
Style	‎Drill Bit
Surface Recommendation	‎Plastic,Stainless Steel,Steel,Wood
Tool Flute Type	Hex Shank
Tool Flute Type	‎Hex Shank
Warranty Description	‎Normal life of the product

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: david brandt

Single use product

Beware this will most likely only last for one or two holes. It does a reasonably good job on the first hole. But dulls very fast. I dunno, this may be par for the course on all step drills. Do you research. Use a lubricant. I used WD-40, but I'm not sure if this was the best option.

Scritto da: TG

Did the Job

I purchased this bit the other day to do one job. Our (aluminum) storm door was installed by the previous owner who did not have the correct size bit. Our lock-set was not flush to the door. The only way to do this was to get a large bit. I had 4 holes to drill. The bit cut a nice clean hole on all, I was impressed. Two reasons why I gave the bit a 4 not a five star. I drilled 4 holes, will the bit last beyond these? The second reason was I thought the product was made in the US but the package says China. All and all, it did the job I needed to do!

Scritto da: Justin Jones

Very useful and well built !

Quality seems great

Scritto da: James Schultz

WOW! WOW! WOW!

The is by far the best drill bit I have ever used. I needed to drill a hole in a stainless steel sink. I was installing a filtered water faucet. I had heard there were hardening issues when drilling stainless steel so I was nervous doing it. I watched a few you tube videos and most showed using a step drill bit. After reading the reviews on the Klein Tools KTSB14 Step Drill Bit I decided to purchase one. To keep the stainless steel cool, I placed ice cubes around the spot where I was going to drill the hole. I dipped the Klein Tools KTSB14 Step Drill Bit in a small bowl of water with ice cubes to keep it cool. Drilling at a very SLOW speed and applying a lot of pressure I started to drill the hole. At first it only made a dimple. I again dipped the bit into the iced water and then started drilling again but at a LITTLE faster speed. Once the bit started cutting there was no stopping. It cut like a hot knife in butter. I dipped the bit into the iced water for a third time and started drilling some more. In seconds I was done. The hole was perfectly cut thanks to the markings on the side of the bit and the bit was cold to the touch thanks to the iced water and slow speed I drilled at. It took longer to write this review than it did drilling the hole.

Scritto da: Adam Tabor

Very sharp

Needed for project these step bit exceeded my expectations and will continue to purchase when I need another.

Scritto da: IMGBurn

Meh.

I borrowed one of these from an electrician on the job to drill a hole in metal track to install an all-thread rod for a hold down. as far as drilling the hole it worked great. however, it fell out of my drill when I was removing it to give it back. It fell from waist high and the cutting tip broke off very easily. this tool retails for $65, not worth it in my opinion, should not break that easily. once the cutting tip is broken, it's a $65 paper weight. I have had a similar Temo step bit for several years, bounced it of the ground a few times and still works like new and 1/2 the price.

Scritto da: Alexander

One of the best uni-bits I have ever used.

I have used this on many different metals and it has held its cutting ability very well.

Scritto da: Amazon Customer

Good quality item

Good quality item ????

Scritto da: Warren E Benson

Spend the money, it's worth it

I was heading to an island off the west coast to erect a galvanized steel building and needed to increase the diameter of the baseplate holes from 1/2" to 7/8". The base plates are roughly 1/16" (16 gauge). Because I couldn't just run out an get another bit should one fail, I ordered three different brands of bits. The first two were under $20, so if they worked, great... if not, hopefully this more expensive bit would get the job done. I needed roughly 30 holes expanded. The first bit drilled only a single hole, the second made four holes before it gave out. This bit (which as definitely more expensive) did the job, and then some. I highly recommend spending the money if you have a similar need.

Scritto da: Amazon Customer

Broken tip

The media could not be loaded. I was drilling electrical box when the tip got broken! My majority of my tools are Klein and I thought this product another great tool till the trip broken. Does klein has warranty for this ??

Scritto da: hb

Klein Tools KTSB15 Step Drill

This step drill is the best tool I have found to very quickly yet reliably create the 3 standard hole sizes required to connect small diameter conduit to a steel electrical equipment box. It cuts a hole through steel plate much faster than a hole saw, and creates a perfect hole leaving no burrs. This step drill is evidently of high quality consistent with its cost, and I expect it will continue to perform well for many more jobs than similar less expensive products being sold.

Scritto da: WCL

Pretty good

I originally gave this bit 3 stars but have to change my review. It used to leave a sharp lip that needed to be removed on every knockout I made with it, however after a few months of use it started to perform much better. I don't really understand why it needed time to "wear in" but the sharp lips are not an issue anymore. Its a good bit, but for whatever reason it takes a bit of use to start performing well. Good deal if you exercise a bit of patience.

Scritto da: Amazon Customer

not strong enough

The tip was broken when I was drilling soft(ACR) copper. It was my second time to use it. I am quite disappointed because I can't return it at this point even though it is almost brand new..