Legrand Radiant 2-Gang-Wandplatte ohne Schrauben für Dekorationssteckdosen, weißes Finish. 2-Gang-Wandplatten in Weiß

Brand:Pass & Seymour

3.7/5

25.24

Die Radian-Kollektion ist eine Weiterentwicklung des Standards mit einfachen, klassischen Optionen bei Verkabelungsgeräten, Hausautomationssteuerungen und schraubenlosen Wandplatten, die die heutigen Wohn- und Gastronomieeinrichtungen ergänzen. Schraubenlose Wandplatten aus Polycarbonat von Radiant – erhältlich in 26 Öffnungen. – Extra 3/8 Breite und Höhe als Wandplatten in Standardgröße. – Bieten eine bessere Abdeckung von Felsplatten bei Erscheinungsbild in Standardgröße. – Geformt aus 0,065 dickem Polycarbonat. – 2-teilige Kunststoff-Unterplatte aus Polycarbonat. – Erhältlich in 3 Metallic-Ausführungen und 6 Standardausführungen Farben.Wandplattenabmessungen1 Gang 3,15 x 4,942 Gang 4,96 x 4,943 Gang 6,77 x 4,944 Gang 8,59 x 4,945 Gang 10,40 x 4,946 Gang 12,21 x 4,94Unterplattenabmessungen1 Gang 1,81 x 4,78 x .152 Gang 3,62 x 4,78 x .153 Gang 5,44 x 4,78 x .154 Gang 7,25 x 4,78 x .155 Gang 9,06 x 4,78 x .156 Gang 10,87 x 4,78 x .15

Vervollständigen Sie Ihr Projekt – Wenn Sie dekorative Wandplatten, einen Lichtschalter und einen Dimmer suchen, deckt Legrand alle Ihre Anforderungen an Haushaltsgeräte ab. Verpackung – Die schraubenlosen Wandplatten, Elektrogeräte und Zubehörteile von Legrand werden in einer robusten und zuverlässigen Verpackung verpackt, um sicherzustellen, dass ein Qualitätsprodukt zu Ihnen nach Hause geliefert wird. Kompatibilität – Die Öffnung der Wippschalter-Wandplatte bietet Platz für alle Decorator-Geräte im NEMA-Stil. Langlebig – Die Steckdosen-Wandplatten für Lichtschalter sind kratz-, beulen- und rissfest und bestehen aus robustem, 0,065 dickem Polycarbonat für eine lange Lebensdauer. Einfache Installation – Die einteilige Wippschalterabdeckung lässt sich über jeder Steckdose oder jedem Lichtschalter montieren, sodass Sie die schraubenlose Dekorplatte einfach aufstecken und in wenigen Minuten installieren können. Verwendung – Installieren Sie diese 2-Gang-Wandsteckdosenabdeckung überall in Ihrem Haus für einen eleganten Look, der eine moderne Ästhetik unterstreicht. Wandplatte – eine (1) Polycarbonat-Wandplatte mit weißer Oberfläche, klare Linien ohne sichtbare Schrauben.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Pass & Seymour
Brand ‎Pass & Seymour
Color White
Color ‎White
Configuration ‎Double
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 3,588 ratings 4.7 out of 5 stars
Finish ‎Antique
Finish Type ‎Antique
Included Components ‎Plastic wall plate
Installation Method ‎Snap-On
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 0.2 x 4.96 x 4.94 inches
Item Dimensions LxWxH ‎0.2 x 4.96 x 4.94 inches
Item model number ‎RWP262WCC6
Item Package Quantity ‎1
Item Weight ‎0.08 Pounds
Item Weight ‎1.28 ounces
Manufacturer ‎PASS & SEYMOUR
Material Polycarbonate
Material Polycarbonate (PC)
Material ‎Polycarbonate
Part Number ‎RWP262WCC6
Pattern ‎Wall Plates
Product Dimensions ‎0.2 x 4.96 x 4.94 inches
Size ‎2 Gang
Switch Style Decorator
Switch Style ‎Decorator

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Sarah
Gives a touch of class and makes your room feel more modern
Every time I look at it it makes me happy, because it just looks so sleek. It has stayed nice looking for a few years now.
Scritto da: The Reaper
Recommenfed, but they ate pricey compared to the basic wall plates
Recommenfed, but they ate pricey compared to the basic wall plates for devora light switches and electrical recepticals (outlets). But they do get rid of the screws showing and add a cleaner look. Electrician"s tip: Just know that the top and bottom corner metal tabs (the ones that look like mouse ears) on any switch or receptical, are there so you can bend the up to push the switch or receptical off the wall surface as needed to make it sit level and flush. Simply use a small screw driver and fold the tabs downward to lift the switch or receptical higher from the surface of the wall and/or the electrical box. This helps if the wall is uneven plaster, drywall, or textured or even stucco on exterior walls. Also helps for electrical boxes that are recessed too far into the wall. Never just tighten down a switch or receptical to the maximum and against the electrical box, unless that is even and flush with your surrounding wall surface. I like to use a small allen wrench to bend these tabs, as it as a short and long side to allow better leverage or in tight spaces. Once level and flush you can tighten the screws on the inner part section of the wall plates untill they sit flush too. Then just click on the top cover, with the two slots holes down. Then just use a small flathead screw driver in those holes to remove it when needed. I usually just gently lift it from the bottom and they pop right off. I also bought the 2 and 3 gang (2x 3x switches or recipticals) to use where I had multiple gangs in my kitchen and bathroom.
Scritto da: Brian G. Wermeyer
Won’t completely cover Wemo switches
The switch plate included with Wemo switches is a bit over 1/4” thick. This switch plate and all others that are said to be screwless will not sit flush with the wall. The extra plate that you have to attach to the switch makes the cover plate sit proud of Wemo reset buttons and leaves a gap between the wall and switch plate. There is nothing wrong with the look and quality of the product. It just doesn’t work with Wemo
Scritto da: hotscot
What a difference!
Upgraded old switches. Looks great. Easy to install
Scritto da: Ashraf patel
Very nice and easy
The media could not be loaded. Easy to install
Scritto da: AskHoffa
Looks awesome
Really easy install with a screw driver only. They really make such a difference especially if you just repainted. It just looks very sleek and modern.
Scritto da: Nikwax
Not as good as the competition
I’ve been installing Lutron switches and switch plate covers around the house. I though I’d give the Legrand covers a try. Unfortunately, I found the Legrand covers harder to install, and the results not as nice looking as the Lutron covers. As they are priced similarly, I removed the Legrand cover and replaced it with a Lutron.
Scritto da: Linda M.
Looks wonderful!
This wall plate was the only one we could not find in a store. Looks amazing!
Scritto da: EagerBeaver
Excellent product
Easy to install and remove as well as great colour match.
Scritto da: Maz
Amazing
Very good quality
Scritto da: Hyacinth
The plug covers aren’t always flush, but it still looks good can to me
It’s a clean finish
Scritto da: Gervais Boulianne
Bon prix
Bon rapport qualité prix
Scritto da: Richard Beaudry
A1
A1

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array