LG EAU61865301 Original OEM Konvektionsventilatormotor für LG Range/Herd/Öfen

Brand:LG

3.4/5

111.45

Dieser hochwertige OEM-Konvektionsventilatormotor EAU61865301 von LG für Herde/Herde/Öfen der Marke LG wird nach genauen Spezifikationen aus langlebigen Materialien hergestellt. Der Konvektionsventilatormotor dreht den Ventilatorflügel, um heiße Luft für eine gleichmäßige Erwärmung durch den Ofen zu zirkulieren. Bitte beachten Sie, dass vor dem Austausch des Konvektionsventilatormotors alle Versorgungsleitungen von Ihrem Herd/Herd/Ofengerät getrennt werden sollten.

Keine Einheiten verfügbar
Das Leben ist gut, wenn Sie sich für Originalteile von LG OEM Factory für Ihre LG-Geräte entscheiden. Der hochwertige LG OEM EAU61865301 Herd-/Herd-/Ofen-Konvektionsventilatormotor ist aus hochwertigen Materialien gefertigt, um Haltbarkeit und exakte Passform zu gewährleisten. Befolgen Sie bei der Installation dieses Teils unbedingt die Anweisungen im Benutzerhandbuch. LG EAU61865301 Konvektionsventilatormotor für Herd/Ofen/Ofen hat ungefähre Maße von L: 2,5 x B: 3,5 x H: 4. Der Ersatz-Konvektionsventilatormotor für Range/Herd/Ofen von LG dreht den Ventilatorflügel, um heiße Luft gleichmäßig durch den Ofen zu zirkulieren Heizung. Dieser Konvektionsventilatormotor von LG ist ein Original-OEM-Teil (Original Equipment Manufacturer), das nach genauen Spezifikationen hergestellt wird.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.3 4.3 out of 5 stars 105 ratings 4.3 out of 5 stars
Included Components ‎appliance-replacement-parts
Is Discontinued By Manufacturer ‎No
Item model number ‎EAU61865301
Item Package Quantity ‎1
Item Weight ‎1.03 pounds
Manufacturer ‎LG
Part Number ‎EAU61865301
Product Dimensions ‎3 x 3 x 4 inches

3.4

8 Review
5 Star
74
4 Star
9
3 Star
5
2 Star
3
1 Star
10

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: David P.
A quiet convection oven after replacement
My convection oven is over 10 years old. I have removed and cleaned the shaft of the fan motor several times. A few months ago the fan started to make noise which increased over time. I removed the fan and cleaned the shaft. This time the fan did not work after re-installation. Bummer. I then ordered this replacement. The new fan motor is as quiet as new. The fan I removed had worn the bearings, hence the fan stopped working since the rotor was rubbing against the stator, and these fans have very little torque. My only frustration is the high mark-up of this style motor. For a normal bathroom ventilation fan, the price would be 1/3 or 1/4 of the price of this motor. I appreciate this motor has to withstand the very high heat of the self clean cycle of the oven. I do not know if this requirement adds to the cost of the bearings/motor or other components. I can say I should have purchased this motor a year or more earlier.
Scritto da: Ray
Great part
Easy to install
Scritto da: Jay
Prefect replacement
Only took an hour to replace prefect fit for my oven
Scritto da: Corey Smith
Easy install, works great.
Exactly what I needed. Had to research a while to determine if this was the correct part, and it was.
Scritto da: Ralfi220
Perfect
Easy replacement, found a YouTube guy to help with the diy and it’s perfect.
Scritto da: Eric J.
Exact Replacement
This convection fan motor is an exact replacement for my LRE 3083ST range. From a difficulty stand point using a scale of 1 to 10 with 10 being difficult this is a 3. There is a YT video that shows the replacement in detail. Just remember when removing the fan inside of the oven that the nut holding the fan on is a left hand thread. The fan motor works perfectly and shipping was prompt.
Scritto da: stevenik
Easy install
Came on time. Looks OEM. This was an easy install for us. We unplugged the oven, popped it open and removed the racks. At the back is the fan bezel cover thingie held on by 4 screws. We removed it. Then removed the nut on the end of the fan. Pulled the C clip from fan shaft. We then hopped to the back. Removed the 5 screws holding the large middle panel. I think there were two screws on the smaller upper left panel. We removed that to help remove the larger middle panel. The fan was now exposed. Pulled the screws off. Swapped the motor and then did everything in reverse. Was good to go.
Scritto da: LT
Exactly as advertised!
Took about 30 minutes from pulling the oven away from the wall to placing it back; including the time took to clean the area behind it.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array