POWERTEC 70219 PVC-Staubsammelschlauch (3 Zoll x 10 Fuß)

Brand:POWERTEC

3.6/5

73.14

Der 3 Zoll x 10 Fuß große PVC-Staubsammelschlauch – POWERTEC 70219. Ein praktischer, sicherer und kostengünstiger Staubsammelschlauch, der zur Verbesserung Ihrer vorhandenen Staubsammel- und Filtersysteme in der Werkstatt entwickelt wurde. Flexible Vielseitigkeit Ganz gleich, ob Sie einen Industriestaubsauger oder ein zentrales Staubsammelsystem in Ihrer Werkstatt eingebaut haben, Sie wissen, wie wichtig ein superleichter, flexibler und knickfester Staubsammelschlauch ist, der den Strapazen des täglichen Werkstattgebrauchs standhält. Robuster, aus hochwertigem PVC-Material gefertigter Schlauch, der unter dem Druck Ihres Staubsammlers nicht zusammenbricht. Die Haltbarkeit, Festigkeit und einfache Installation von PVC machen es ideal für die Staubbekämpfung in der Werkstatt, zum Sammeln von Sägespänen sowie für Tischlerei- und Holzbearbeitungsanwendungen. Innovative Designmerkmale Das beeindruckend durchsichtige Gehäuse ist durch einen inneren Spiralfederstahldraht verstärkt und ermöglicht Ihnen die Überwachung der Luftbewegungsleistung, der Schmutzsammlung und der Feinstaubabscheidung/-filtration. Als sicher eingestuft Bei der Staubabsaugung müssen stets die Gefahren statischer Elektrizität und das Brandrisiko berücksichtigt werden. Dieser PVC-Schlauch verfügt über eine flammhemmende Konstruktion, ist temperaturbeständig (bis zu 176 °F) und kann sich elektrostatisch entladen (bei Erdung). Es bietet außerdem eine außergewöhnliche Beständigkeit gegenüber Chemikalien sowie sauren und alkalischen Materialien. Produktspezifikationsdaten Konstruktion: Hochleistungs-Weich-PVC (Polyvinylchlorid) Verstärkter Spiralfederstahldraht: Federstahldrahtgröße: 3 Zoll Durchmesser x 10 Fuß Länge Wandstärke: 0,5 mm / 1/64 Kompressionsverhältnis: 3: 1 Temperaturbereich : -50° F bis 158° F (kurzfristig bis zu 176° F)

Keine Einheiten verfügbar
Ideal für eine Reihe von Sägemehlsammlern, Innenlüftungskanälen für Klimaanlagen und 3-Zoll-PVC-Staubsammelsystemen für Holzbearbeitungsanwendungen. Perfekt für jedes Staubsammelsystem mit freier Sicht – so können Sie die Staub-/Trümmerabscheidung und die Dampf-/Rauchfiltration überwachen. Der ultraflexible, mit Federstahldraht verstärkte Schlauch sorgt für Robustheit und Manövrierfähigkeit. Hergestellt aus hochwertigem PVC für Haltbarkeit, Festigkeit und einfache Installation. Enthält (einen) transparenten flexiblen Schlauch mit einem Durchmesser von 3 und einer Länge von 10 Fuß (Linksspirale).
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Clear
Color ‎Clear
Customer Reviews 4.6 4.6 out of 5 stars 294 ratings 4.6 out of 5 stars
Included Components ‎PVC Flexible Dust Collection Hose
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 36 x 4 x 4 inches
Item model number ‎70219
Item Package Quantity ‎1
Item Weight 3.28 Pounds
Item Weight ‎3.28 pounds
Manufacturer ‎POWERTEC
Material PVC
Material ‎PVC
Measurement System ‎English/Standard
Nominal Wall Thickness 5 month
Part Number ‎70219
Product Dimensions ‎36 x 4 x 4 inches
Size ‎3 Inch
Style ‎10Ft

3.6

8 Review
5 Star
77
4 Star
16
3 Star
3
2 Star
2
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Curt Spender
Heavy duty
Is heavy duty and better than expected. Easy to use and works great on my shop vacuum system.
Scritto da: Kelly S. Parker
excellent vent line for a bathroom fan
The dummies who installed my office bathroom fan used a 4" flexible foil tube to vent it to the roof. They tried to use foil tape to bridge the gap to the 3" output of the fan. 9 years later, I got up in the suspended ceiling and noticed that most of air was just blowing around that dead space. It is much easier for air to blow through that gap than to go the extra ten feet to make it to the roof. This fits perfectly on the plastic 3" fan output and also on the 3 to 4" adapter. The stiffness of the tube makes it bend perfectly towards the roof vent. I want to find more uses for this excellent tube!
Scritto da: Sabayon Linux User
Nice stuff
Warning, I drilled my opening with a 3 inch hole saw, and this hose would not go through the hole. I needed a 3 1/8" hole for a squeeze fit, or a 3 1/4" hole for a slide fit. I am using it with an inline 12Vdc bilge vent fan. It went on the fan intake and exhaust flanges so tightly, I did not need any clamps (but it did go on). Not cheap, but looks like it should last. Not sure it is fuel proof, so I would not splash fuel on it.
Scritto da: Anne H.
Works!
I am using this in my woodturning shop. I previously used black tubing with the vacuum system. This is much easier to see any clogs - and in fact seems to clog less often - and provides great suction. Would definitely purchase again.
Scritto da: OopsIDidItAgain
Worked perfect
I have an old grinder that works great but was in desperate need of a new hose. This was way too long but the perfect width and I wanted clear. I simply cut it to size and saved the rest, for what I don’t know. Works great!
Scritto da: Mr fix
Powermatic pm2000 dust collector replacement
I replaced the dust collection hose inside my Powermatic pm2000 table saw. The one that came with the saw was two stiff so when I would tilt the blade it would pull it loose and get saw dust inside the cabinet. This one works great! The coils are backwards from the original so it wouldn’t thread on like the original, but not a problem as it pulls right over the threads and stays put.
Scritto da: nj.firefighter
I liked the quality. Durable for my bath vent!
Just the perfect vent I needed for a bathroom remodel. Strong, durable walls that are nice and thick. I used a short piece to flex about the exterior good to bath fan damper. I measured it perfect for a consistent stretch, no wrinkles. Had the fart fun run for a test. Great air flow through a few feet. This vs metal flex that will corrode. This will need to be in a wall until the earth splits open. Just what I wanted for hopefully a very long service life.
Scritto da: HH Steve
Flexible 3" air hose for Powermatic saw
Like another reviewer here, I was looking for a replacement hose for a Powermatic PM2000 table saw. This is it! The answer to the problem of the factory hose being waaaay too stiff, falling off every time the blade is tilted. Perfect solution....highly recommended if you need flexible material.

Verwandte Produkte

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array