Prime-Line N 6599 Spiegeltürrollenbaugruppe, 1-1/2 Zoll, Kunststoffrad, Kugellager, konkav, Fräser

Name: Prime-Line N 6599 Spiegeltürrollenbaugruppe, 1-1/2 Zoll, Kunststoffrad, Kugellager, konkav, Fräser
Brand: PRIME-LINE
SKU: 0049793065995
Price: 23.99 EUR
Availability: InStock

Brand:PRIME-LINE

3.4/5

€
23.99

PRODUKTBESCHREIBUNG Diese Spiegeltürrollenbaugruppe besteht aus einem extrudierten Aluminiumgehäuse und ist in einer gefrästen Aluminiumausführung erhältlich. Das Gehäuse ist 1 3/4 Zoll breit, 1/2 Zoll dick und 3 Zoll hoch. Diese Gehäusehalterung verfügt außerdem über einen runden extrudierten Vorsprung und wird von der Monarch Door Company für ihre Türen mit Aluminiumrahmen der Serie „500“ verwendet. Das Rad besteht aus strapazierfähigem Kunststoff, der für ein sanftes, lang anhaltendes und leises Rollen sorgt, und verfügt über Stahlkugellager und eine konkave (gerillte) Kante. Diese Spiegeltürrollenbaugruppe wird an der Unterseite von verspiegelten Schrankschiebetüren montiert, ist nach der Installation verstellbar und wird von vielen Herstellern von Schranktüren verwendet. VOM HERSTELLER Diese Spiegeltürrolle besteht aus Nylon und ist an einem Aluminiumgehäuse befestigt. Es verfügt über ein verstellbares Design für die Bodenmontage mit einem runden extrudierten Ansatz. Diese Stilrolle passt auf Schranktüren mit Aluminiumrahmen der Serie 500 von Monarch Door Co.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0049793065995

Kategorien Werkzeuge & Heimwerken, Eisenwaren, Türbeschläge & Schlösser, Schiebetürbeschläge,

Einfache Installation in weniger als 30 Minuten mit ein paar einfachen Werkzeugen. Lässt sich in den extrudierten Kanal an der Tür schieben. Konstruiert aus einem Kunststoffrad mit Stahlkugellagern, montiert in einem extrudierten Aluminiumgehäuse. Konkave Kugellagerrolle mit 1-1/2 Zoll Durchmesser. 1-3/4 Zoll x 1/2 Zoll x 3 Zoll Montagegehäuse. Wird von der Monarch Door Company für Spiegel-Schiebetüren der Serie 500 mit Aluminiumrahmen verwendet.

Assembly Required	Yes
Batteries Included?	‎No
Batteries Required?	‎No
Brand	PRIME-LINE
Color	Mill
Color	‎Mill
Country of Origin	‎USA
Customer Reviews	4.4 4.4 out of 5 stars 172 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Mill
Included Components	‎Hardware;Door, Gate & Window Hardware;bi-fold-door-hardware
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎N 6599
Item Package Quantity	‎1
Item Weight	0.11 Pounds
Item Weight	‎1.76 ounces
Manufacturer	‎Prime-Line Products
Material	Plastic
Material	‎Plastic
Part Number	‎N 6599
Product Dimensions	‎1.75 x 3.81 x 0.5 inches
Size	‎1-1/2 in.
Warranty Description	‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Robert

ALMOST fit the door. With a little sanding the closet door with new wheels roll smooth as silk.

30 year old bracket on the door would not accept the new wheel. I suspect the milling is more accurate on the new wheel which is smooth vs the door bracket which has casting ridges. 300 grit silicon carbide sand paper onto the top of the slot of the door bracket solved the problem. Faster if a rasp file is used prior to the sandpaper. Took about 5 minutes of rasping/ sanding (after about 3 hours of experimentation). Closet door with new wheels smooth as silk.

Scritto da: Stephen tibbs

great replacement for old worn out sliders on closet doors

super well sliding door gliders replacements for closet doors. fit well but had to shave small amount off with file to fit.

Scritto da: G. Kan

Better than I thought it would be

Old closet doors were a pain to move. The wheels were damaged and were hard to move. They were simple to replace with a second person helping. Needed someone to help lift the door off the track. Wheels aren’t locked in so make sure to hold on to them to clear tracks. Once off of track the wheels can drop straight down. Slide new ones in and place back onto the tracks. Please NOTE that these are round fittings where it slides into the mount. There is a similar looking one that has a square fitting. Make sure you are getting the right ones. There is a screw on top of the mount attached to the door that will adjust the height of each wheel to ensure the doors can close flushed to the wall.

Scritto da: Rob B.

They Do Not Fit a Monarch Sliding Mirror Door WITHOUT MODIFICATIONS

These looked absolutely identical to the old/original ones I pulled out of my door. The problem is they do not slide onto the door. The casting is off just enough to cause interference between the two. I had to tap out the piece it slides into on the door, place it in a vise and grind down about 1/16" for it to now slide within the mounting piece. Having said all that, what should have been a 5 minute installation took about an hour between taking the doors completely out, laying them on their sides to get the frame track out to grind it down, had they fit correctly, the whole job would have taken 5 minutes... Now, considering they might be scarce elsewhere, once they were installed with the modifications, they work just like new. So, unless you have the tools and time, I would hire someone to install them for you.

Scritto da: P.H.Various

Really tight fit

The wheel spins beautifully. The assembly however is very difficult to install. The size is exactly the same as the receiver. So you have to tap this thing in with a hammer. I can’t speak for anyone but myself, but I really don’t like having to hammer my mirror doors. Just saying it’s a bit nerve-racking. Either way it’s in and they roll really nice.

Scritto da: Dee

Just what I needed....

I was so happy when I found these as my sliding closet doors are a discontinued model. This part fit perfectly. Sliding the doors runs smoothly on the track. This saved me replacement costs of over 700 USD.

Scritto da: edward Biedrzycki

It works

That it worked

Scritto da: GCC

Just What I Needed

My mirrored sliding doors were installed in 1985. I'm so thankful that I checked Amazon and found the exact part needed to replace the original door roller assembly. These worked great and were easy to change out and properly adjust. Now my sliding doors work like a charm!