Red Devil 08090I RD PRO 100 % hitzebeständiges RTV-Silikondichtmittel, ein wasser- und wetterfester Klebstoff für den Einsatz bei hoher Hitze, 10,1 oz. Tube, Rot, 12er-Pack 12er-Pack 10,1 oz

Brand:Red Devil

3.5/5

402.15

FÜR BESTE ERGEBNISSE: Entfernen Sie vor dem Auftragen des Dichtmittels alle alten Dichtungsmassen, Ablagerungen oder andere Rückstände, die die Haftung beeinträchtigen könnten, und stellen Sie sicher, dass das RTV-Dichtmittel für optimale Ergebnisse auf sauberen, trockenen Oberflächen verwendet wird. 50-JÄHRIGE PRODUKTHALTBARKEITSGARANTIE: Verlassen Sie sich bei Ihren Projekten, die extremer Hitze ausgesetzt sind, auf das hitzebeständige Dichtmittel aus 100 % Silikon von Red Devil. Das Dichtmittel bleibt flexibel und widersteht Vibrationen mit beeindruckender Haftung und sorgt für eine wasserbeständige Versiegelung mit einer Haltbarkeit von 50 Jahren. RISST NICHT, SCHRUMPFT ODER SCHÄLT NICHT: Mit seinem nicht durchhängenden Design sowie der wasser- und wetterfesten Formel hält das RTV-Dichtmittel den Elementen stand und reißt nicht, blättert nicht ab und schrumpft nicht, sodass eine zuverlässige Abdichtung über Jahre hinweg gewährleistet ist. Widersteht extremer Hitzeeinwirkung: Das hitzebeständige Dichtmittel RD Pro in Industriequalität ist mit Eisenoxid formuliert, um extremer Hitzeeinwirkung standzuhalten, und hält Temperaturen von 600 Grad Fahrenheit (intermittierend) und 500 Grad Fahrenheit (konstant) stand. ROTE FARBE ZUR EINFACHEN ERKENNUNG: Das hitzebeständige Dichtmittel ist ideal für den Einsatz in industriellen Anwendungen. Es ist in Rot erhältlich und kann auf Ofenbändern, Industrieöfen, Ofenfenstern, Trockenöfen, Kesseln, beheizten Heizgeräten, Flanschrohrverbindungen, Zugangstüren und Heizungen verwendet werden Elemente in Geräten und Abzüge an Gasgeräten.

FÜR BESTE ERGEBNISSE: Entfernen Sie vor dem Auftragen des Dichtmittels alle alten Dichtungsmassen, Ablagerungen oder andere Rückstände, die die Haftung beeinträchtigen könnten, und stellen Sie sicher, dass das RTV-Dichtmittel für optimale Ergebnisse auf sauberen, trockenen Oberflächen verwendet wird. 50-JÄHRIGE PRODUKTHALTBARKEITSGARANTIE: Verlassen Sie sich bei Ihren Projekten, die extremer Hitze ausgesetzt sind, auf das hitzebeständige Dichtmittel aus 100 % Silikon von Red Devil. Das Dichtmittel bleibt flexibel und widersteht Vibrationen mit beeindruckender Haftung und sorgt für eine wasserbeständige Versiegelung mit einer Haltbarkeit von 50 Jahren. RISST NICHT, SCHRUMPFT ODER SCHÄLT NICHT: Mit seinem nicht durchhängenden Design sowie der wasser- und wetterfesten Formel hält das RTV-Dichtmittel den Elementen stand und reißt nicht, blättert nicht ab und schrumpft nicht, sodass eine zuverlässige Abdichtung über Jahre hinweg gewährleistet ist. Widersteht extremer Hitzeeinwirkung: Das hitzebeständige Dichtmittel RD Pro in Industriequalität ist mit Eisenoxid formuliert, um extremer Hitzeeinwirkung standzuhalten, und hält Temperaturen von 600 Grad Fahrenheit (intermittierend) und 500 Grad Fahrenheit (konstant) stand. ROTE FARBE ZUR EINFACHEN ERKENNUNG: Das hitzebeständige Dichtmittel ist ideal für den Einsatz in industriellen Anwendungen. Es ist in Rot erhältlich und kann auf Ofenbändern, Industrieöfen, Ofenfenstern, Trockenöfen, Kesseln, beheizten Heizgeräten, Flanschrohrverbindungen, Zugangstüren und Heizungen verwendet werden Elemente in Geräten und Abzüge an Gasgeräten.
Brand Red Devil
Color Red
Item Weight 10.1 Ounces
Material Silicone
Style 10.1 oz

3.5

8 Review
5 Star
72
4 Star
12
3 Star
10
2 Star
2
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Aiden
Did it's job well
Needed it to temporarily seal an exhaust flange after replacing the front pipe. Mating surface on existing center pipe was corroded badly, and I couldn't get a seal. This did the trick while I waited for a new center pipe to arrive.
Scritto da: Oleg Simakoff
Perfect for tough jobs
Nothing else I tried from Lowe's or home Depot worked. This did the job! I need to glue the ceramic cooktop to the metal stove frame. I'd say my only issue is that the color is red. Other than that minor thing, I am very happy with the outcome
Scritto da: Mortimer
Good stuff
So far so good. I used this to re-attach a piece of stone veneer very near the face of my fireplace, was concerned that due to the heat other glues wouldn't stand up. During this time of year, we have the fireplace going pretty much 100% of the time. I have a thermometer on the blower grate and it often reaches close to 400 degrees; the brick I needed to attach was only a few inches away from the grate. I let the fire die down, squirted a couple blobs on the back of the brick and stuck it on. It's tacky enough the brick held itself in place while drying. Been over a week now and it's still attached firmly and we've had the fireplace going 24/7. It works! **Update 4 months later** Still holding strong! We have had the fireplace cooking non-stop since I put this stuff on. No signs of loosening up at all. **Update 3 years later** Bricks adhered with this stuff are still stuck on, it's awesome. I just came here to order another tube for a different brick that fell and thought I would update this review.
Scritto da: Amazon Adam
High performance seal for furnace inducer fan!
Purchased this to fix and create a new seal for a furnace inducer fan assembly. The fan assembly is the heart of the furnace in order to get it up and running. I replaced the inducer fan as the bearings were done. I used this product to create a tight seal to prevent the carbon monoxide and other fumes from entering the basement. In addition to a gasket, I used this to seal the base of the inducer fan assembly to prevent it from leaking anything. The product is the best and withstands 500 degrees temperature. A must for anyone working with a furnace or hot surface that requires additional seal protection.
Scritto da: Lulu1953
Strong easy to use
The glass on my induction eye slide off, instead of buying another. It is better then the one I originally bought!
Scritto da: milleeran
Barely withstood 400° after curing for a week
I am sure it has its applications 600° is not one of them
Scritto da: Ot
Its Caulking
Was very fluid, made it easy to apply, to motor heads.
Scritto da: SoNatStone
Great high temp adhesion, slight off-gas at first burn
I used this to adhere and fiber-cement surround to a zero-clearance direct vent fireplace, seems to be working just fine after several uses. The only issue is we noticed a smell that resembled a hot engine bay during the first couple times we ran the unit after using this product. It hasn't completely gone away, but it is lessening with time. Totally worth it though for the working temp range of the product.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array