Reliable Hardware Company RH-0532F-A Federbelasteter Oberflächenmontagegriff mit Gummigriff, Zink

Brand:Reliable Hardware Company

3.8/5

23.64

PRODUKTBESCHREIBUNG Die CP875-Serie ist für die allgemeine Wartung auf engstem Raum konzipiert. Es verfügt über einen integrierten pneumatischen Regler mit einer Leistung von 0,3 PS (220 W). Es ist ein sehr kompaktes und leichtes Werkzeug, das eine extreme Manövrierfähigkeit bei Hochgeschwindigkeitsschleifanwendungen gewährleistet. Erhältlich als reines Werkzeug oder als Bausatz. VOM HERSTELLER Der CP875 ist ein wirtschaftlicher 1/4-Zoll-Mini-Winkel-Luftschleifer. Dieses äußerst beliebte Werkzeug ist kompakt und verfügt über ein leichtes Design für einfache Manövrierfähigkeit. Die Gassperre verhindert versehentliches Starten. Der 90-Grad-Winkelkopf ermöglicht Flexibilität auf engstem Raum. . Anwendungen – Hochgeschwindigkeitsmischen, Glätten, Portieren und Entgraten in begrenzten Bereichen. Spezifikationen: Spannzange: 1/4 Zoll und 6 mm, cfm – 4, Schlauchgröße – 3/8 Zoll, Leerlaufgeschwindigkeit – 21.000.

EAN: 0856248005051

Kategorien

Federbelasteter Griff – Gummigriff mit 0,75 Zoll Durchmesser. Helles Zinkfinish. 16-Gauge-Platte / Bügeldurchmesser 0,25 Zoll. 5 Befestigungslöcher 0,16 Durchmesser. 4,88'' B x 3,20'' H.
Brand Reliable Hardware Company
Color Zinc
Exterior Finish Aluminum
Material Metal
Product Dimensions 5.5"L x 0.75"W

3.8

8 Review
5 Star
81
4 Star
13
3 Star
4
2 Star
1
1 Star
1

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Andrew T.
Very sturdy.
install this on a propane heater with pop rivets . Works great. Very sturdy.
Scritto da: Amazon Customer
Very sturdy
Very strong, I’m sure it out last me and it has a good strong return spring. You won’t go wrong.
Scritto da: tew440
great
great
Scritto da: InGearMode
Reliable Hardware sells good quality
Wide enough for the adult hand and the rubber grip large enough diameter so as not to cut in. Strong spring snaps back. Plenty thick steel.
Scritto da: Derek
Works as an industrial type handle
I wasn't sure I needed these but was glad to have them when I was at the end of my project. They look good and are cheap
Scritto da: Justin R
Incorrect dimensions listed, but overall a good handle.
The dimensions listed are not accurate in any meaningful form: the 4.88" is (roughly) the width of the handle, and the 3.2" H is from the top of the rubber to the edge of the mount when laid flat. There's about 1.5" of clearance in the handle, but it's just a bit shy if you're planning to thread 2x4s through it. The hard rubber grip does not rotate, so shaving a bit off the inner side of the rubber might be easier than trimming down the wood. The mounting plate is 5.5" x 1-5/8" and 10-24 bolts fit nicely in the 5 mounting holes. The handle does NOT swing up to exactly 90 degrees, it's a bit less, so if you're planning to use this as a top handle, just keep that in mind. The mounting plate is about 0.1" thick. Drilling out the single rivet and replacing it with another mounting bolt/screw will definitely add some strength, but may not be worth the effort to wrangle with the spring. Overall, this is a great handle. it's really beefy and fairly well made. Seems sturdy enough to be abused a lot without failing. Just be aware that the dimensions as listed on the product page are not accurate.
Scritto da: frederick haddix
Good
Good
Scritto da: Bobby Hinojosa
but definitely good for what I bought it for
This was my second choice for a handle, but definitely good for what I bought it for. I was making a custom box for my performance setup, Keyboard, talkbox, voice transformer, laptop, sound interface, novation launchpad... it a lot of Stuff lol. Anyway going to practice and gigs would be easy if it was all in one box. I didn't trust myself with the recessed type so I gave this a go. In total my case and gear is about 60 lbs. My dumb self used 3/4" plywood in my defense I thought I was buying and paid for 1/2". Either way its built "tough". But thats a lot of weight for the handle to carry just being screwed into the wood. I actually bolted it down and It has held up with 0 problems. The picture I have is when I was almost done. I have since added the same type of handles on all sides. The quality is really good. The spring in the handle is nice, not too stiff and not too loose. I do with it came in a black in this style. I had to paint mine black and added a clear coat and they have held their color for 7 months. So far this case with handles has held up for over 8 months.

Verwandte Produkte

hot
NK 16IN Frontal - SLV
0.1/5

€ 34.74

NK 16IN Frontal - SLV
0.1/5

€ 34.74

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array