SharkBite 1/2 Push-to-Connect x 1/4 Zoll (3/8 Zoll OD) Push-to-Connect gerades Absperrventil, Vierteldrehung, PEX-Rohr, Kupfer, CPVC, PE-RT, HDPE, 23337-0000LF

Brand:SharkBite

3.7/5

34.91

PRODUKTBESCHREIBUNG Vereinfachen Sie Ihre Sanitärprojekte mit dem geraden Push-Compression-Absperrventil SharkBite aus Messing. Mit dem Push-to-Connect-Mechanismus dieses Absperrventils können Sie den Wasserfluss zu Armaturen oder Geräten für Wartungs- und Reparaturzwecke steuern und unterbrechen. Diese Sanitärarmatur aus Messing ist ideal für Arbeiten in engen Räumen und kann in Nassleitungen installiert werden. Diese geraden Absperrventile mit Steckanschluss sind einfach zu installieren, kompatibel mit PEX-, CPVC-, PE-RT-, SDR-9-HDPE- und Kupferrohren und erfordern für die Installation keine Spezialwerkzeuge, Kleber, Crimpen oder Löten. Diese steckbaren Kompressionsventile haben ein elegantes, attraktives Chrom-Erscheinungsbild und eignen sich für gewerbliche Reparaturen oder Heimwerkerprojekte. Alle SharkBite-Ventile, Clips, Verbindungen und Adapter werden in den USA hergestellt und getestet. VOM HERSTELLER Shark Bite-Steckverbindungen sind die schnellste und einfachste Möglichkeit, Kupfer, CPVC und PEX in jeder Kombination – nass oder trocken – ohne Löten, Klemmen, Verbindungen oder Kleber zu verbinden. Führen Sie einfach das Rohr ein, und die Edelstahlzähne greifen und greifen fest, während ein speziell formulierter O-Ring zusammengedrückt wird, um eine perfekte Abdichtung zu schaffen. Ebenso schnell erfolgt die Demontage mit dem einfachen Trennwerkzeug. So können Armaturen und Ventile einfach ausgetauscht und wiederverwendet werden. Sie können nach der Montage sogar gedreht werden, um die Installation in engen Räumen zu erleichtern. Armaturen zertifiziert für 200 PSI und 200 °F (93 °C). Design zertifiziert nach den Produktnormen ANSI/NSF-61 und ASSE 1061 für den Einsatz in der Trinkwasser- und Warmwasserverteilung. Zugelassen für den Einsatz unter der Erde und hinter Wänden ohne Zugangsklappen

Keine Einheiten verfügbar
HERGESTELLT IN DEN USA: Alle SharkBite-Ventile, Clips, Verbindungen und Adapter werden in den USA hergestellt und getestet. VOM PROFIS BEVORZUGT: SharkBite-Werkzeuge und -Beschläge erfüllen die gleichen hohen Standards für gewerbliche und private Sanitäranwendungen und kombinieren Haltbarkeit und Benutzerfreundlichkeit; verfügen über eine elegante Chromoberfläche für ein attraktives Erscheinungsbild. EINFACH ZU INSTALLIEREN: Dieses innovative Absperrventil verfügt über einen 1/2-Zoll-Push-to-Connect-Einlass und einen Messingkugelhahn mit Vierteldrehung und vollem Durchgang für eine schnelle und einfache Bedienung; keine Spezialwerkzeuge, Crimpen, Kleben oder Löten erforderlich; kann in Nassleitungen eingebaut werden. VIELSEITIG: Gerade Push-Stopp-Fittings aus Messing eignen sich gut für PEX-, CPVC-, PE-RT-, SDR-9-HDPE- und Kupferrohre. SHARKBITE MESSING-DRUCK-GERADE-STOPP: Gerade Druck-Absperrventile aus Messing werden zur Steuerung und Absperrung des Wasserflusses zu Armaturen oder Geräten für Wartungs- und Reparaturzwecke verwendet; ideal für Arbeiten in engen Räumen; Entfernen Sie es mit einem Trennclip oder einer Trennzange.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Certification ‎Nsf
Color Straight
Color ‎Straight
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 133 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Copper
Exterior Finish ‎Copper
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2.25 x 1.35 x 4.5 inches
Item Dimensions LxWxH ‎2.25 x 1.35 x 4.5 inches
Item model number ‎23337-0000LF
Item Package Quantity ‎1
Item Weight 0.01 Pounds
Item Weight ‎0.01 Pounds
Item Weight ‎0.16 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎23337-0000LF
Pattern ‎Valve
Product Dimensions ‎2.25 x 1.35 x 4.5 inches
Size 1/2 in. x 1/4 in.
Size ‎1/2 in. x 1/4 in.
Style ‎Straight
Voltage ‎120 Volts
Warranty Description ‎For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

3.7

9 Review
5 Star
76
4 Star
15
3 Star
4
2 Star
4
1 Star
1

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: T. J. Craig Jr.
What an easy installation...
We put our old refrigerator in the basement and wanted to be able to make extra ice when needed. I had a 1/2" water line right above that was capped and was able to cut the end and pop on the sharkbite fitting. NO problems, but I was careful... A straight cut, not angled... no burrs on the end of the pipe, I smoothed them off... and made sure the fitting had fully bottomed out. Definitely recommend but proper installation is critical.
Scritto da: Phillip Johnson
Don't call a plumber do it yourself
Don't have solder, flux and a mini torch? Not a plumber or trust your skills when soldering? OK, buy this instead. Reem the copper end with a knife so that there's no burr and slap this puppy on and turn your water on. Just make sure you push this on completely, that's all. As easy as it gets and holds city water pressure no problem. Worth the price so if you need this then just buy it already.
Scritto da: Dustin Pearson
Worked perfect for installing new humidifier on my furnace!
Ran the pex line over there, threw this on the end. hooked up a 1/4' stainless braided hose ('ice maker hose') and it worked perfect. I like having the shut off right there by the humidifier cause it makes maintenance just a little faster. SharkBite fittings work excellent and I have yet to see one fail.
Scritto da: Karen Kent
Very easy to turn and the quick connect hardware was included
Very easy to turn and the quick connect hardware was included. It only took a few spanner turns to seal it. While my application didn't call for such lush looks (these are meant for toilets) the chromed brass is pretty. The clip intended to hide the disassembly ring doubles as a removal tool if you turn it upside down ;3 For anyone worried about it, I removed this from the same pipe twice and it still seals just fine. This particular design should be able to be removed and reinserted a handful of times with no problems.
Scritto da: Eizu
Has Anyone Else Had One Of These Leak?
Sharkbite is a premium brand when it comes to push-on fittings, so I was surprised when I pushed this guy onto some PEX tubing and it leaked. I haven't had that problem with the other Sharkbite brand valves and pressure regulator that I bought. I monitored it for a few days, and it seemed to eventually stop leaking after I fiddled with it a few times. I don't know if it is my paranoia, but it still feels damp at that connection when I touch it. Needless to say, I am replacing this fitting with a crimp on PEX tee fitting, and a compression fitting ice maker shutoff valve. The peace of mind of knowing that our plumbing will not leak was worth the extra expense.
Scritto da: Austin Walker
or pex so they are great to have on hand
Local supply house did not carry these. I was adding a whole home humidifier to my house and the HVAC installer wanted to use a saddle valve. I purchase a sharbite T and one of these valves instead. These can be used for copper, pvc, or pex so they are great to have on hand. Have used several sharbite problems over many years and have never had one leak or any problems.
Scritto da: Machaon
Fast and easy solution for inserting a stop valve into a water line.
Sharkbite is so easy and fast to use. This stop valve makes installation easy. Just cut the pipes/tubing and insert. Really good quality and very functional. We've replaced quite a bit of our 50 year old plumbing with Sharkbite. Nice to be able to repair plumbing without welding or having to use a bunch of tools.
Scritto da: Michael
Wonderful
Great
Scritto da: Juan
Easy way to do it
Wrong size ,send back

Verwandte Produkte

hot
hot
Kohler 28304-KS-NA Rite-Temp-Ventil
3.6/5

€ 384.26

Kohler 28304-KS-NA Rite-Temp-Ventil
3.6/5

€ 384.26

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array