Swanson Tool Co SVV150 9 Zoll Savage T-Fase mit Edelstahlmaßstab, Zoll-/metrischen Markierungen, Komfortgriff, sicherer Metallknopf

Brand:Swanson Tool Co., Inc

3.3/5

43.84

Der Amerock BP9338G10 Swirl'Z-Knopf mit einem Durchmesser von 1-1/8 Zoll (29 mm) ist in satiniertem Nickel gehalten. Verspielte Linien verleihen Ihren Schrankbeschlägen Charakter und Leben mit dem lustigen, entspannten Stil von Swirl'Z. Das klassische Satin-Nickel-Finish sorgt für einen eleganten, leicht gebürsteten, warmgrauen Metallic-Look. Amerock bietet ein komplettes Sortiment an dekorativen und funktionalen Schrankbeschlägen, Badbeschlägen, Haken und Schienen sowie Wandplatten. Die preisgekrönten dekorativen und funktionalen Hardware-Lösungen von Amerock haben den Ruf des Unternehmens für schicke Design-Accessoires begründet, die Hausbesitzer dazu inspirieren, ihren persönlichen Stil auszudrücken. Amerock ist in einer Vielzahl von Ausführungen und Stilen erhältlich und bietet hochwertige Designs zu erschwinglichen Preisen. Immer erschaffen. Immer zeitlos. Immer Amerikanisch.

EAN: 0038987941504

Kategorien Werkzeuge & Heimwerken, Mess- & Layoutwerkzeuge, Quadrate,

Unverzichtbares Werkzeug für Holzarbeiter. Kompaktes Design, passt in die Tasche. Der gummigepolsterte Griffeinsatz sorgt für einen angenehmen Halt. Der einzigartige Endverriegelungsmechanismus ermöglicht die Verwendung der Fase auf beiden Seiten. Übertragen Sie einfach Winkel und messen Sie Tiefen. Eloxierter Aluminiumrahmen für Langlebigkeit. Die 9-Zoll-Edelstahlklinge verfügt über präzisionsgeätzte schwarze Abstufungen in gut lesbaren US- und metrischen Einheiten.
Brand Swanson Tool Co., Inc
Color silver
Graduation Range 9 Inches
Material Stainless Steel
Style Classic

3.3

13 Review
5 Star
65
4 Star
17
3 Star
4
2 Star
6
1 Star
7

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Too Many Luggage
Good product
Very durable and easy to use.Great to the a ruler.
Scritto da: Bob
Very well made!
This item is well made, easy to operate and locks the angle setting in place with ease. it has made my work easier!
Scritto da: Nathan
Ignore the negative reviews. This is a fantastic tool.
Sturdy as all hell and locks up tight as anything. Bought to replace a wood handled one that warped - if you're a serious carpenter, skip the bull and get this. It really is the best model I've ever used.
Scritto da: John Torres
Nice weight, that's it
I thought I had found a decent bevel gauge with a decent locking mechanism- as it didn't have that all too familiar garbage wheel lock, I was convinced this would be an affordable, adequate bg. The locking mechanism doesn't work. I could spit on it and introduce error
Scritto da: Magnets
Easy to use
I like this very much, I read a lot of the reviews about the knob not being tight enough and was pretty sure I'd think the same, but I have to say once you put some effort into tightening it you really need to put effort into moving that blade... I mean you can for sure and if you pump it you will lose the level but it's tight enough to use in a workshop if you're careful enough.
Scritto da: Chic B
Easy to use
The end lock is what stands out about this tool. It is very easy to adjust and lock the angle exactly where you want it. This is far better than the typical design, where the flat knurled knob located at the intersection is difficult to grab and tighten securely.
Scritto da: victor
Desapointed .locking screw do not lock the blade as supposed to do.
Good quality except for the locking mechanism
Scritto da: Jayme
Securing Mechanism Very Convenient
This is the 2nd of this item I've purchased. I chose it for the locking mechanism location given past frustrations with sliding T-bevels with wing nuts, etc. I've been very pleased with the tool's usefulness given the convenient location of the locking mechanism.
Scritto da: Emerson K
If you're willing to take it apart you can make it a lot better.
Tap the orange panels with a plastic mallet to break the glue and slide them off. Inside will be a beveled disk held on by a screw. The disk is very roughly machined and a light smoothing with a file is all that's needed. When you reassemble you will notice it takes less effort to get the tool much tighter. It's strange that the part with the worst finish is the one most vital to the tool. Would be 5/5 if not for this, but lack of quality control on this one part puts it squarely in 3/5.
Scritto da: TJC
Needs to be repaired out of the packaging
Glue has failed on both sides of the plastic handle and on the thumb screw brand new. Loctite and some more serious glue will fix it but need to set and tension the screw yourself and I'd be willing to bet that nut will loosen quickly meaning it will need constant maintenance to prevent the blade from moving freely. Otherwise everything looks great on it.
Scritto da: Luis Roberto Gianini
Produto invrível
Dispensa apresentações apenas por ser parte do acerto Swanson/Savage. Um sistema de aperto que elimina a inconveniente porca borboleta que atrapalha a utilização quando a suta é invertida. Esperei pacientemente pela chegada e não me arrependo. Pode comprar porque além de ser um produto excelente, o preço caiu pela metade.
Scritto da: Robert Nesbitt
Works ok but lock does not prevent arm from moving
The locking mechanism does not prevent the arm from moving completely as I would have expected. Holds it firm but it could potentially get knocked off the desired angle. I'm hoping this gets tighter with use.
Scritto da: Tumeke
Broken before I used it...
Unfortunately the knob to tighten the bevel was falling off before I even used it... I modified it with a grub screw to make it work... would not buy this brand again

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array