Viking Bohrer und Werkzeug von Norseman 66480 SPM-29 Typ 250-UB 135 Grad Split Point Magnum Sup Premium mechanisches Bohrerset (29-teilig)

Name: Viking Bohrer und Werkzeug von Norseman 66480 SPM-29 Typ 250-UB 135 Grad Split Point Magnum Sup Premium mechanisches Bohrerset (29-teilig)
Brand: Norseman
SKU: 0050728664800
Price: 161.30 EUR
Availability: InStock

Brand:Norseman

3.8/5

€
161.30

Der Qualität, Beständigkeit, Service und Wert verpflichtet. QUALITÄT beginnt bei Viking Drill and Tool mit dem besten Werkzeugstahl, den wir kaufen können, und endet mit den erstklassigen Produkten in unserem Katalog. Unsere Schneidwerkzeuge sind so konzipiert, konstruiert und hervorragend verarbeitet, dass sie eine lange Haltbarkeit bieten. Unsere 74.000 Quadratmeter große Produktionsstätte in St. Paul, Minnesota, ist speziell für die einzigartige Aufgabe der effizienten Herstellung hochwertiger Schneidwerkzeuge konzipiert. KONSISTENZ ist ein natürliches Nebenprodukt unserer Erfahrung und unseres Engagements für Qualität. Bei Viking Drill and Tool sind erfahrene Maschinenbediener, die mit den besten Rohstoffen der Welt arbeiten, in der Lage, Ihnen Jahr für Jahr Produkte von gleichbleibend hoher Qualität zu liefern. Bei unseren Ultra Bor Super Premium-Produkten reduzieren wir regelmäßig die anerkannten Werkzeugtoleranzstandards um die Hälfte, um sicherzustellen, dass unsere Kunden Bohrer erhalten, die nach den engsten Spezifikationen und mit höchster Konsistenz und Genauigkeit hergestellt werden. Alle bei Viking Drill and Tool verwendeten Materialien erfüllen die strengen Anforderungen des National Aerospace Standard (NAS) 907. Dieser als der strengste in der Branche anerkannte Standard schließt die Verwendung von Stählen geringerer Qualität aus, die strengen Anwendungen nicht standhalten. Die Verwendung dieser äußerst hochwertigen Materialien gewährleistet die Konsistenz jedes unserer in den USA hergestellten Produkte. Unsere umfangreiche Auswahl an in den USA hergestellten Werkzeugen ist darauf ausgelegt, Ihnen für jede schwierige Aufgabe das richtige Werkzeug zum richtigen Preis zu bieten.

Keine Einheiten verfügbar

EAN: 0050728664800

Kategorien Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Bohrmaschinen, Teile & Zubehör, Twist Bits, Bohrer Bits, Jobber-Bohrer,

Mechanik Länge 3-Flächen am Schaft. Spezieller Hi-Molybdän-Werkzeugstahl/Goldoxid. Präzise geschliffene Spitze, Nuten, Körper, Freiraum und Bohrerdurchmesser für ultimative Genauigkeit und Leistung. 135-Grad-Spaltpunkt für genaue Zentrierung und schnelles Eindringen. 29 Stk. Setzen Sie Premium Mechanic 3-Flats auf Schaft mit 135-Grad-Split-Point.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Norseman
Brand	‎Norseman
Country of Origin	‎USA
Customer Reviews	4.8 4.8 out of 5 stars 174 ratings 4.8 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Finish	‎Gold
Finish Type	Gold
Finish Type	‎Gold
Included Components	‎Drill Bits
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎7.13 x 4.25 x 1.88 inches
Item model number	‎66480
Item Package Quantity	‎1
Item Weight	‎2.4 ounces
Manufacturer	‎Viking
Material	Stainless Steel
Material	‎Stainless Steel
Part Number	‎66480
Product Dimensions	‎7.13 x 4.25 x 1.88 inches
Shank Type	3-Flat
Shank Type	‎3-Flat
Surface Recommendation	‎Metal,Stainless,Steel
Tool Flute Type	‎Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Hal Trainer

Easy to Use / Accurate Hole Size Drill Bits

These excellent quality drill bits are easy to use and drill an accurate hole size. The "split point" alleviates "bit walking" on smooth and/or contoured surfaces.

Scritto da: Richard K.

Amazing but don't push it

Second set I bought. Abused the first set with brutal drilling of steel bars in concrete. That's a bit much for every drill bit... Also used the old set to drill out big anti theft bolts at my car as the safety lock nut stripped. Didn't use cutting oil and just went too fast and too hard. They became dull fast. Not the way to drill... I know. But if treated properly these cut amazingly. Love them a lot. Expensive but worth the price. Will buy again.

Scritto da: Bud

Drill bits

Cut very well and hold up nice. I did purchase the cutting oil they sell also and it seems to help a lot when drilling.

Scritto da: ken

sharp bits are a pleasure to use

great to have sharp bit on hand when you need them. I only use them when I have too

Scritto da: Phil McCrackin

Quit looking - these are it

After dozens of mid grade titanium and "high quality" bits I have used for 40 years, the best thing I ever did was buy these. I waited 6 months to do this review so its not a "they look great in the box" review. Solid bits, stay sharp, of course they are consumables but I can see now that this set will last me a very very long time. Most people use drill bits improperly, use steady pressure at a 90 deg angle at a speed that keeps the bit cutting no faster and use tap magic or some other lube on thick metal. The box internal hinges could use some work, but I didnt buy them for the box, the "drawers" pop out once in a while, but I LOVE these bits.

Scritto da: EricD

Wow, I had no idea what i was missing!

Can't even tell you how many sets of drills I've owned over the years, dozens, along with countless individual bits. I'd buy what i thought were good ones, including mostly "cobalt bits" for any metal work in recent years, and really thought i was getting the best I could. I was definitely wrong! I've only drilled a few things with these, but they really do blow through steel like you're drilling wood, just amazing. As always, to get the best results use a good lubricant like Tap Magic and keep your RPMs relatively low, and I suspect these will last a lifetime. Love that they're jobber length but have the three flats like a mechanics bit too, best of both worlds, and how they should all be made IMO. I'm reading some reviews where people are upset that the smaller bits have broken. Unfortunately, there are no unbreakable 1/16" bits. Careful handling, watching your angles, pressure, speed, and lubrication is the only way to stop breaking them.

Scritto da: james

Cuts through steel like butter

These drill bits are extremely sharp. I finally was able to use them today to drill through varying thicknesses of steel up to quarter inch and they didn't skip a beat. Right through like a hot knife through butter. I have been an automotive tech for 15 years and these are by a far sight the best drill bits I have ever used. Better than the Matco hyper bits or whatever they're called and for a fraction of the price. I've already decided that when this set dulls or a few break I will be repurchasing the same set again. You won't be disappointed by these drill bits fellas just go for it.

Scritto da: Lorianne Saravanja

Hss, high quality

Great set of drills. I'm tired of buying expensive cheap drill sets that are not durable. I use these in both hand tools and a lathe/mill. They are excellent. Hand tools are the bigger killer of drill bits. Wobbly, misaligned, uncontrolled feed and not rigid. These seem to be holding up well. These are hss, not cobalt etc. The fancy drills with exotic sounding metals are best for specific machine tools. These are hand held tool capable. Cobalt drills chip and break far too easily in hand tools. If you are tired of cheap drill bits or are using hand tools, then these are for you. They are a shallower angle, 135 deg as opposed to 118. So they are slower to cut but are easier to control and stronger. They drill through ss easily. Just use lube.