Wandsteuerung ASM-SH-1606 B Tiefe Stecktafel-Regalbaugruppe nur für Wandsteuerungs-Stecktafel, 6, Schwarz

Brand:Wall Control

3.8/5

59.62

Die Stecktafel-Regalbaugruppe Wall Control mit einer Tiefe von 6 Zoll und einer Breite von 16 Zoll für die Stecktafel und die geschlitzte Werkzeugtafel von Wall Control besteht aus robustem 14-Gauge-Stahl und bietet eine hervorragende Aufbewahrung für Stecktafeln. Im Gegensatz zu den meisten Stecktafel-Marken, die bei Regalen zu kurz kommen, sind die Stecktafel-Regale von Wall Control robust und mit ihrer soliden Konstruktion und dem attraktiven Finish der Aufgabe gewachsen. Wandsteuerungsregale und Zubehör für geschlitzte Stecktafeln aus Metall verfügen über eine kratz- und rostbeständige Einbrennlackierung. Dieses sicherere und stabilere Werkzeugtafelzubehör ist nur für die Verwendung mit den Schlitzen vorgesehen, die sich in den Werkzeugtafelplatten „Wall Control Metal Pegboard“ befinden. Das Zubehör für Wall Control Slotted Tool Boards bietet eine patentierte Verriegelung, die zwei bewusste Bewegungen nach oben und unten erfordert, um die Haken zu aktivieren und zu lösen. Durch diese Funktion ist es weniger wahrscheinlich, dass Zubehörteile für geschlitzte Wandsteuerungs-Stecktafeln aus der Werkzeugtafel herausfallen, als bei herkömmlichen Steckhaken, die leicht abfallen können, wenn Werkzeuge entfernt werden. Obwohl Wandsteuerungs-Stecktafeln aus Metall herkömmliches 1/4-Zoll-Stecktafelzubehör sowie geschlitztes Wandsteuerungszubehör aufnehmen können, ist die hier enthaltene geschlitzte, sichere Werkzeugtafel-Regalbaugruppe nur für die Verwendung mit Wandsteuerungs-Stecktafeln und Werkzeugtafeln aus Metall geeignet. Wall Control-Stecktafelprodukte werden in den USA hergestellt. (1) Schwarze 6 Zoll x 16 Zoll Stecktafel-Regalbaugruppe zur Befestigung an Wall Control-Stecktafel-Werkzeugtafeln. Wall Control-Regalbaugruppen sind nicht für die Verwendung mit den 3 Zoll hohen Stecktafelstreifen von Wall Control geeignet. Wall Control-Regalbaugruppen sind NUR mit Wall Control-Stecktafel-Werkzeugtafelplatten kompatibel.

Hergestellt in den USA. Die geschlitzten Werkzeugtafelregale von Wall Control sind nur für die Verwendung mit Wall Control-Stecktafeln und geschlitzten Werkzeugtafeln geeignet. Das Zubehör für Wandsteuerungs-Werkzeugtafeln mit Schlitzen bietet eine eingebrannte Farboberfläche, die attraktiv und rostbeständig ist und für eine lang anhaltende Ästhetik sorgt. Robustes Stecktafel-Regal für Stecktafel-Werkzeugtafeln zur Wandsteuerung.
Age Range (Description) Adult
Age Range (Description) ‎Adult
Assembly Required ‎Yes
Batteries Included? ‎No
Batteries Required? ‎No
Brand Wall Control
Brand ‎Wall Control
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 974 ratings 4.7 out of 5 stars
Finish ‎Black
Finish Type Black
Finish Type ‎Black
Furniture Finish ‎Black
Installation Method ‎Wall Mount
Is Discontinued By Manufacturer ‎No
Item model number ‎ASM-SH-1606 B
Item Package Quantity ‎1
Item Weight ‎1.8 Pounds
Manufacturer ‎Wall Control
Material Alloy Steel, Metal
Material ‎Alloy Steel, Metal
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Items ‎1
Number of Shelves 1
Number of Shelves ‎1
Part Number ‎ASM-SH-1606 B
Product Dimensions 6"D x 16"W x 4"H
Product Dimensions ‎16 x 6 x 4 inches
Product Dimensions ‎6"D x 16"W x 4"H
Shape Rectangular
Shape ‎Rectangular
Shelf Type Metal
Shelf Type ‎Metal
Size ‎6 Inch
Special Feature Heavy Duty, Rust Resistant
Special Feature ‎Heavy Duty, Rust Resistant
Special Features ‎Heavy Duty, Rust Resistant

3.8

13 Review
5 Star
82
4 Star
13
3 Star
2
2 Star
1
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: mark berentson
Great shelf
So nice I bought another one. I like that it's deep. Holds a good amount of weight without worry. Love this brand. So many options, little price.
Scritto da: Bobby Lee
Nice
Would buy again
Scritto da: mkrg
Fits Wall Control board, but you still have to play with placement of support brackets
I originally had the 6x16” Wall Control red shelf replaced because the support brackets would not fit my Wall Control peg/slat board. After much frustration, I came to realize the openings in my board are not all uniform, thus a bracket that fits in one location may not necessarily fit in another. If you find yourself struggling like I did, try installing the brackets at different spots. Try moving over left or right or even go to a different row! It was absolutely unpredictable! What saved this shelf is that it can connect to the brackets at multiple points in 1” increments. So there are up to 15 points of contact to try your luck with! Now it looks good!
Scritto da: 04CE
Sturdy, acceptable wobble, easy to install, but the shelf can fall off
It's quite sturdy, and I've put a lot of weight on it. That said, there's no mechanism to keep the shelf from simply falling off. It only sits on four tiny little locators. If the shelf was sat down, then slotted into the locators it would be dramatically sturdier. As of now, anything that bumps the shelf (or sticks to it) can cause the whole shelf to pop off and fall.
Scritto da: William D. Guyer
Bought one to test, purchasing 5 more over time, maybe a bit too pricey
I bought one to test and was extremely impressed. I mounted my Wall Control panels approximately 10 inches below the ceiling level with the intention of a adding a shelf. I originally intended a 12" shelf, but the price difference made me feel it was worthwhile to try the 6" first. I'm glad I did. It's perfect for being an out of the way addition to the organization of the panels. In my particular application I will have between 6 and 10 panels along a long wall before my project is complete, and these allow me to recover enough random flat space to make the wall organization usable at that length. I imagine I will put one at the top of each panel. They are very easy to install, secure, and sturdy. However, for the construction on these I feel they are a little overpriced, hence 4 instead of 5 stars. I feel they are premium but not as premium as the price. The locking into the Wall Control specific platform is the reason I will purchase these and the price is the reason I will not purchase any of the larger ones.
Scritto da: William Masterson
Can never have too many shelves!
I purchased two of these shelves as part of an expansion of the garage work station. While there are all kinds of hanging supports and brackets, sometimes you just need a shelf. And with this item, I'm there. Great size that doesn't stand off too far from the wall, and sturdy enough for a variety of items.
Scritto da: dave_g
Serious shipping issues
It’s a shame, Wall Control can’t ship their products without damage. The shelf is nice but for the price it should not arrive damaged.
Scritto da: Edward J.Lamb
Well coordinated
Easy to install, well coordinated
Scritto da: Ioan Leroux
Easy to install Sturdy
Easy to install. Sturdy Color matching. Wish they sold bundle for cheaper prices and more depth version on amazon.
Scritto da: Joey
awsome and sturdy , photgraphy equipment
for my photography equipment, strurdy and i trust that it will hold for a ling time
Scritto da: Robert K.
Very usefull for my metal peg board
This is just the right size and adapts very well to my metal peg board to store various tools , mesuring tapes or other small hardware ..
Scritto da: YJ
Awesome
Love it
Scritto da: Jon Bradley
Heavy duty construction
Well made but specific to a particular type of peg board. Make sure that your peg board fits this shelf - it does not work with all standard peg boards. Heavy duty construction.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array