Wera 05051005001 Kraftform 810/1 Sechskant-Bithalter-Schraubendreher, Sicherungsring, 1/4 Kopf, 120 mm Klingenlänge, 120 mm Klinge, Sicherungsring

Name: Wera 05051005001 Kraftform 810/1 Sechskant-Bithalter-Schraubendreher, Sicherungsring, 1/4 Kopf, 120 mm Klingenlänge, 120 mm Klinge, Sicherungsring
Brand: Wera
SKU: 4013288012258
Price: 36.25 EUR
Availability: InStock

Brand:Wera

3.8/5

€
36.25

3M E-A-R Push-Ins Metal Detectable Ohrstöpsel mit Kabel wurden speziell für die Lebensmittelverarbeitung und andere Branchen entwickelt, in denen es wichtig ist, zu verhindern, dass Ohrstöpsel Produkte und Prozesse verunreinigen. Diese Ohrstöpsel werden von den meisten Metallerkennungssystemen erkannt und verfügen über ein implantiertes Kugellager aus rostfreiem Stahl im Stecker und Metallpartikel im Kabel.

Keine Einheiten verfügbar

EAN: 4013288012258

Kategorien Werkzeuge & Heimwerken, Industrie & Wissenschaft, Elektro- & Handwerkzeuge, Handwerkzeuge, Schraubendreher und Mutterndreher, Schraubendreher,

Herkunftsland: Tschechische Republik. Sechskant-Rollschutz gegen Wegrollen. Mehrkomponentiger Kraftform-Griff für schnelles und ergonomisches Schrauben. Bithalter mit Sicherungsring für Bits mit 1/4 Sechskantantrieb.

Batteries	1 Unknown batteries required.
Brand	Wera
Drive System	External Hex
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	8.82 x 2.72 x 1.65 inches
Item model number	05051005001
Manufacturer	Wera Tools
Number of Pieces	1
Product Dimensions	8.82 x 2.72 x 1.65 inches; 4.69 Ounces
Size	120mm Blade, Retaining Ring

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Justin

Some QC issues

The shaft of the screwdriver is slightly crooked/angled from the handle. Disappointing considering Wera is supposed to be a pretty good brand. Other than that the thing is pretty solidly built, feels tough and the magnet inside the tip is very strong.

Scritto da: Data

Great when used with Wiha 90mm power drive bits.

Very nice small bit holder. I have this and a 816RA with Wiha 90mm power drive bits in my tool belt. Nice to have numerous different bits with two different size bit holders instead of a bunch of individual screwdrivers. Saves weight hanging of your hip all day.

Scritto da: Darth Ludacris

Very overpriced for what you get

I bought this based on the claim of it having a really strong magnet and adjustable extension. The ergonomics are just ok, and would be much better with a more squarish/flatter or ridged handle to give you something to get a better grip to turn against for more torque because it is very round and smooth faced, and they would have also been able to make the handle just a bit thinner. The handle is a bit on the fat side for using close to the side of something, not letting you get much torque with enough perpendicular force to not strip a hard to turn screw. The magnet is decent compared to cheap drivers, but has difficulty magnetizing the longer bits which is essential for tight spaces so not to lose the screws, particularly when working on computers and electronics. I do like the locking quick change head so the bits don't come out until you're ready for them to. You can also remove the extension and use the mid (2 inch) or longer bits (not the short inch long ones) in just the handle as it uses the same standard grooved ring locking design. It is better than average, but should cost $15 to $20 dollars at most, not the $30 to $40 usually being asked.

Scritto da: Richard D Wyckoff

great size for my etc kit

Bought to have a compact bit handle for my etc kit, love the size, holds the bits very securely!

Scritto da: M. Murray

Excellent, properly designed bit driver!!!

Excellent bit driver!! This bit driver features a bit lock instead of relying on a magnet to keep bits attached to it, and the lock is rock solid. I was tired of cheap drivers that only have a weak magnet to hold bits. Plus the only thing magnets hold on to are little bits of metal shavings and eventually makes it impossible to put bits in the driver. With the locking mechanism this Wera driver has, no more hassle. The handle absolutely fits the hand better than any other driver, and with the extension it’s able to get into many hard to reach areas. The only downside to this driver, and it’s not enough of a downside to not give this driver a 5 star rating, is that if it’s a really tight area your trying to get into, the bit housing may be too big to get into, just FYI. I have bought several of these bit drivers to use in the home, the shop, and work. Buy this bit driver, you will not be disappointed!!

Scritto da: Ben K.

This handle might fit larger hands, but not mine.

I want to like this handle, however the largest diameter on the screwdriver is just too big. I have large sized hands and that end of the handle that is in between the ring and pinky finger is way too big. I think the largest ring should be in the center of the handle and about 3mm less in diameter on the largest ring.

Scritto da: David Fishwick

Great for tight places.

Small, but I like how you can just push in a bit and it stay's till you want it out. Magnet is not strong.

Scritto da: M. Paris

Excellent chuck, very nice ergonomics

I was a bit disappointed when I first opened the box because it seemed smaller than I was expecting. Then I compared it to my Craftsman #2 phillips I've owned forever and found the handle to be longer and has a larger diameter at its widest point. Then I started to use it and realized the ergonomics are far superior to the traditional screwdrivers I have been using forever. There's a hexagonal ring around the business end where your thumb rests that gives more support than if it were rounded. Your index finger rests in the narrow area behind and your middle and ring fingers straddle the widest part giving more control and comfort than a standard screwdriver that doesn't have these tapers. The black part of the handle is hard plastic while the green areas are some type of synthetic rubber which greatly improves the grip. The chuck works quite well and it will secure both impact and straight bits. You push forward to release and the chuck stays in the forward position until the next bit is inserted and it automatically snaps back to lock which is a nice feature. 100mm bits will give you the standard length of a typical #2 screwdriver. https://www.amazon.com/gp/product/B071QY6X16

Scritto da: GWM

Quality

Smaller than I expected but feels comfortable in the hand, the extending shaft is useful, a quality screwdriver.

Scritto da: Mikey Cky

buy it

really tough and worth it

Scritto da: Pete

Wera you going to use this?

This is a chunky bit of kit and we'll capable of driving screws that need a Posidrive No 3 bit. Wera quality and Wera bits fit very snugly. I probably have more Wera screwdrivers than is healthy for one person but they are very well made and do the job day after day.

Scritto da: Lee Norton

Top quality as expected from Wera

Great quality took

Scritto da: Foysal Uddin

Great product!

Arrived on time very efficient delivery, very good to use I had some screws I could not fit in using a different screwdriver however in using this product it worked perfectly. I would highly recommend it also has a nice feel to it.