Attwood 1733-4 Inline-Bilgengebläse der Serie Turbo 3000, für Entlüftungsschlauch mit 3 Zoll Innendurchmesser, wasserbeständig, 12 Volt

Brand:attwood

3.7/5

58.90

Dieses riesige Monster Jam-Spielset ist 60 cm hoch und über 1,20 m breit, sodass Sie epische Monster Jam-Stunts ausführen können! Beladen Sie Ihre LKWs und betätigen Sie den Hebel, um sie in den Aufzug zu bringen. Bringen Sie die Monster Jam-Action mit ECHTEN Lichtern und Sounds auf die nächste Stufe. In dieser Garage stehen über 20 Monster Jam Trucks. Rollen Sie ein und beladen Sie eine Reihe Ihrer Lieblings-Monster-Jam-Trucks (separat erhältlich). Dieses Set enthält einen exklusiven Grave Digger Truck aus Druckguss zum 40-jährigen Jubiläum in Gold im Maßstab 1:64. Dieses Spielset ist nicht nur zum Parken gedacht, es ist auch zum Actionmachen gedacht! Jedes Level bringt einzigartige Stunts mit sich. Rase die Rampen hinunter und bringe deine Geschwindigkeit bis an die Grenzen! Machen Sie eine Rückwärtsklappe vom Dach oder fahren Sie mit dem Achterbahn-Sprungring! Rütteln Sie mit Ihren Spielzeug-Trucks durch die Kurven und testen Sie Ihre Federung. Rollen Sie in einen vertikalen Abgrund und räumen Sie andere Monster Jam-Trucks ab! Bringen Sie es für einen Mega-Sprung nach oben! Schaffen Sie eine Allradlandung oder stürzen Sie in einem wahnsinnigen Peitschenhieb zu Boden! Das spielt keine Rolle, denn das ist Monster Jam! Gehen Sie in die Garage und holen Sie Grave Digger auf den Lift, um aufzutanken und einsatzbereit zu sein! Die Monstertruck-Spielzeuge von Monster Jam sind die perfekten Geschenke für Kinder ab 3 Jahren. Racken, stapeln, attackieren Sie die Strecke mit der Monster Jam Garage! Bist du bereit zu rollen?

Betreiben Sie das Gerät nicht in Bereichen mit hoher Hitze über 71 °C (160 °F). Marine-Zündungsgeschützt und mit integrierten Montagefüßen für eine einfache vertikale oder horizontale Installation ausgestattet. Bis zu viermal effizienter als Konkurrenzgebläse, da es bis zu 40 Prozent weniger Ampere verbraucht. Der Systemluftstrom übertrifft den von Inline-Gebläsen älterer Bauart um bis zu 25 Prozent. Die Flügelbewegung und -neigung sind auf einen hohen Auftriebskoeffizienten ausgelegt, was zu einer erhöhten Luftströmungsgeschwindigkeit und einer optimierten Belüftung führt. Verfügt über ein patentiertes Inline-Design und der 5-Blatt-Lüfter maximiert den Luftstrom und die Effizienz. Bietet eine hervorragende Belüftung für Bereiche wie Motorräume, Küchen, Bilgen und Toiletten.
Brand attwood
Color Unspecified
Item Weight 13.6 Ounces
Material other
Voltage 12 Volts

3.7

13 Review
5 Star
78
4 Star
13
3 Star
4
2 Star
2
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: JE
Blower
Works as it should
Scritto da: Jason
Plastic where hose mounts is thin.
This is my second one. First one cracked where you connect the hose. Can't take any type of real pressure. So don't tighten down a hose clamp to much. Didn't crack right away but did crack eventually. Thank goodness only the crack happened and didn't get water down in it. But the blower works like it should
Scritto da: Luke Y.
Works great.
I purchased this to help cool the clutching on my side by side. This little fan does a great job.
Scritto da: Bobby
Works perfect
I put this fan in my engine compartment of my max 6 wheeler to remove some of the heat and it works perfectly
Scritto da: T. Sutton
hydro cooling fan
For whatever reason ,, on the John Deere 140 I bought at an auction someone cut the shaft off of the back of the hydro where the fan is supposed to mount . I used this fan to cool the hydro . We will see how it works out long term !
Scritto da: robert
Great fan
Works like it should
Scritto da: rick ibarra
blower
worked great, makes some noise but does the job for what i need it for
Scritto da: Gary
Original lasted a bit over 3 years before failing from moisture
I use this in a 16 tap keezer to move the cold air around keeping the kegs and tap lines equally cold. The fan assembly is pointed down as I need to draw cold air from the bottom of the keezer up, assisting with natural convection currents from the temperature differences. This has a brush motor that is insulated, but like wearable items the brushes are usually the first to go. The fan is operated by a DC motor controller that keeps the fan speed very slow compared to its full power. The fan is overly powerful for my application. Its environment is similar to what it was intended to be used for. The high moisture though eventually took its toll. Still a very well built product that would buy again.
Scritto da: Sean
Great product
I used this to replace the blower on my 20yr old inboard boat. Super easy to install and the drill holes on the blower were the same spacing as the original. I purchased some waterproof/solderless/heat shrink connectors from Amazon to connect the wires (I just cut the wires and spliced them). It took me 5 minutes to replace, and it’s nice and quiet with lots of power. I would highly recommend this product.
Scritto da: M. C. Alessandrini
No complaints, does the job and seems as good as any.
Well Attwood products have been on boats as oem for easily 40 or so years, so it would go without saying this one is as good as any. Certainly they are not spectacular in any way but they do the job. The original one on the boat (also Attwood) lasted 16 years, hopefully this one will too (somehow I doubt it). Seems to do the job well enough. There are some complaints about noise, I am not at liberty to have an opinion due to lack of experience, but I can say it's a little quieter than the original on our boat. What I can say though, is that my Brother and I discussed the comments on noise and we personally prefer them loud so we can hear when we left it on!
Scritto da: PBL
right part- right price!
quiet and easy install
Scritto da: Amazon Customer
Good product
Great product for the money Fairly quiet small and moves a lot of air
Scritto da: S Mulligan
Does a good job and arrived quickly
Powerful and quieter than original. Easy to mount. Would prefer if it could have some plug and play options to power it however easy enough to splice and move on.

Verwandte Produkte

hot
WEAVER LEDERKLEMME, Gebläseteil
0.1/5

€ 27.51

WEAVER LEDERKLEMME, Gebläseteil
0.1/5

€ 27.51

hot
Valterra P23518LFVP Ausblasstopfen
3.7/5

€ 28.76

Valterra P23518LFVP Ausblasstopfen
3.7/5

€ 28.76

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array