attwood Unisex-Erwachsene Ersatz-Gummistoßdämpfer für HD Head Bootsanhänger-Zurrgurte, nicht spezifiziert, Einheitsgröße US

Name: attwood Unisex-Erwachsene Ersatz-Gummistoßdämpfer für HD Head Bootsanhänger-Zurrgurte, nicht spezifiziert, Einheitsgröße US
Brand: attwood
SKU: 0014599000082
Price: 35.29 EUR
Availability: InStock

Brand:attwood

3.5/5

€
35.29

Perfekt für jeden Sportler, der Komfort und Kompression sucht. Verfügt über ein Core Flex Pocket Design, das mehr Komfort und Bewegungsfreiheit bietet. Hergestellt aus stützendem Vier-Wege-Stretch, feuchtigkeitsableitenden Stoffen, scheuerfreien Flatlock-Schnüren und einer belüfteten Netz-Cup-Tasche. WARNUNG: Dieser Schutzbecher soll das Risiko schwerer Verletzungen verringern. Kein Becher kann alle Verletzungen durch Stöße verhindern, die während des Gebrauchs auftreten können.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0014599000082

Kategorien Sport & Outdoor, Sport & Fitness, Boote & Segeln, Boote & Ausrüstung, Boot-Anhänger-Zubehör, Lager, Naben & Federn,

Trägt dazu bei, das Gewicht des Außenbordmotors oder der Z-Antriebseinheit beim Anhängertransport oder bei der Lagerung zu tragen, um den Druck vom Bootsspiegel oder der Motorspiegelhalterung zu entlasten. Schwarze stoßdämpfende Gummipolster zum Schutz Ihres Außenbordmotors oder Antriebs beim Anhängertransport. Einfach auszutauschen, wenn alte Beläge/Stoßdämpfer beschädigt oder abgenutzt sind. Ersatz-Gummipolster für den Swivl-Eze-Spiegelschonerkopf.

Brand	‎Attwood
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 406 ratings 4.5 out of 5 stars
Item model number	‎SP-410
Item Weight	‎2.4 ounces
Manufacturer	‎Attwood
Manufacturer Part Number	‎SP-410
Model	‎Attwood Boat Trailer Tie Downs
OEM Part Number	‎993109
Product Dimensions	‎5 x 5 x 5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Darrell M.

Good replacement but took a bit of extra work.

Everything seems to be okay now that they are installed, we'll see how long they last. because these come with machine screws and nuts I did have to do some grinding on the brackets themselves to get them to function correctly. If you don't mind a little extra work you'll be fine.

Scritto da: Amazon Customer

tool

Exact replacement for my transom saver

Scritto da: Amazon Customer

Use rivets instead of the bolts

If you don't want the bolts they provide digging into your lower unit use extra long aluminum pop rivets. You'll have to get them at a specialty fastener shop. Think the ones I use are 3/16 inch. I buy a set of these every couple of years. Cheap enough and keeps my motor secure.

Scritto da: Richard

perfect fit!

just what i expected

Scritto da: Rick Taylor

Transom saver grommets

Rubber grommets are like the original but the bolts get in the way you have to grind the bolts and a little bit of aluminum yolk.

Scritto da: Debbie Alvis

Exactly as stated

Easy to install Fast shipping

Scritto da: Gene

10 Minute Repair

I just replaced my factory rubber lower unit pads on the transom saver. Simple procedure I had to cut off the other three old rubber mounts with a sharp knife one was already missing and I was using a grocery bag to prevent scratching until these came. I merely sniped the aluminum rivets with some snips used the screws that came with it and secured it back to the mount. You will need to remove the small swing arms to get to the screw head and nut. One other thing one screw is shorter than the other on both sides for a reason make sure you note one side is slightly thinner than the other pay attention and you won't have to re-do it like I did.

Scritto da: c0rey

Good replacements

These are ok. They wear out quick holding up my 250 verado. They saves a lot of money rather than replacing my transom saver however

Scritto da: Phil brownlee

Fit perfect

Product works good

Scritto da: blaine hansen

There are different sizes

I needed the smaller size, they only sell the larger size, (size wasn't specified) after re rigging them they may suffice, time will tell

Scritto da: Ronald Wolff

May want to try riveting them on.

They fit perfectly other than the nuts stick out more. My old ones were riveted on, which allowed them to pivot better.