BOSCH 5 Zoll. Winkelschleifer mit Tuckpointing Guard GWS13-50TG

Name: BOSCH 5 Zoll. Winkelschleifer mit Tuckpointing Guard GWS13-50TG
Brand: BOSCH
SKU: 0000346624793
Price: 423.78 EUR
Availability: InStock

Brand:BOSCH

3.3/5

€
423.78

Das Tuck-Pointer-Paket GWS13-50TG von Bosch verfügt über ein 5-Zoll-Gehäuse. Winkelschleifer und ein Staubschutz, der speziell für das Tuck-Pointing entwickelt wurde. Der Bosch GWS13-50 5-Zoll. Der Winkelschleifer liefert mehr Leistung als die Vorgängermodelle mit der gleichen Werkzeuggröße – 13 Ampere und 11.500 U/min. Es verfügt über einen gerichteten Luftstrom, der Staub von wichtigen Komponenten fernhält, und verfügt über eine direkte Motorkühlung, die ihm eine höhere Überlastfähigkeit verleiht. Es verfügt über einen Vibrationskontroll-Seitengriff mit zwei Positionen und einen konstanten Elektronikmotor für einfaches Starten. Der tuck-pointing Staubschutz TG502 ermöglicht eine werkzeuglose Installation und ermöglicht so eine schnelle und einfache Installation und Entfernung. Durch die variable Tiefeneinstellung sammelt sich während der gesamten Schnittdauer Staub auf dem Schutz und durch das große Sichtfenster ist die Schnittlinie gut erkennbar. Die Mühle und der Staubschutz sind Teil der Bosch PRO+GUARD-Staublösungen, einem umfassenden Staubsammelsystem, das Benutzern dabei hilft, die OSHA Silica Table 1-Konformität zu erreichen.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0000346624793

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeuge, Schleifmaschinen, Winkelschleifer,

HALTBARKEIT: Ausgestattet mit Kohlebürsten für mehr Haltbarkeit als Bürsten der vorherigen Generation. Der GWS13-50TG wird außerdem mit Bosch Service Minder-Bürsten geliefert, um den Benutzer darüber zu informieren, wann eine vorbeugende Wartung erforderlich ist. STAUBSCHUTZ: Der GWS13-50TG wird komplett mit einem Tuck-Pointing-Staubschutz geliefert, der speziell für Tuck-Pointing-Anwendungen entwickelt wurde und eine werkzeuglose Installation ermöglicht. Der direkte Luftstrom leitet Staub von wichtigen Komponenten der Mühle weg. LEISTUNG: Ausgestattet mit einem leistungsstarken 13-Ampere-Schleifmotor kann der Winkelschleifer GWS13-50TG bis zu 11.500 U/min produzieren. Darüber hinaus ermöglicht die direkte Motorkühlung eine höhere Überlastfähigkeit. TUCK-POINTING: Der Bosch GWS13-50TG-Winkelschleifer und das Tuck-Pointing-Staubschutzpaket bieten eine All-in-One-Tuck-Pointing-Lösung, die dem Benutzer dabei helfen kann, die OSHA-Quarzstaubverordnung einzuhalten.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	BOSCH
Brand	‎BOSCH
Customer Reviews	4.3 4.3 out of 5 stars 54 ratings 4.3 out of 5 stars
Included Components	‎
Item Dimensions LxWxH	12.3 x 4 x 4 inches
Item Dimensions LxWxH	‎12.3 x 4 x 4 inches
Item model number	‎GWS13-50TG
Item Package Quantity	‎1
Item Weight	5.3 Pounds
Item Weight	‎5.3 Pounds
Manufacturer	‎C & J Direct GmbH & Co. KG
Maximum Rotational Speed	‎11500 RPM
Measurement System	‎Metric
Part Number	‎GWS13-50TG
Power Source	Air Powered
Power Source	‎Air Powered
Product Dimensions	‎12.3 x 4 x 4 inches
Size	‎5"
Style	Angled
Style	‎Angled

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Joe Melton

Works well, but recommend only for larger jobs.

Worked great. I tried a tucking bar to remove old mortar between cinderblocks, and it barely scratched it. This tool, outfitted with a sandwich blade, chewed right through the motor. I'd estimate it can go the length of a cinderblock (16") in less than five seconds. The depth is adjustable; I was cutting to about 3/4" deep. I spent a lot of time looking at ads trying to figure out if the tool comes with a blade. It doesn't, and the manufacturer has gone to some length, in my opinion, to not say so in the literature. Be aware that this thing throws out an enormous amount of dust and sand-like particles. I bought the special hose to connect it to a shop vac with a paper filter, and it was clogged up after a minute or so. Outside, no vac is required, but care should be taken not to blow the debris directly at your face or at another person. I wore a full-face shield with respirator, and recommend this. My hair got terribly matted with the dust, but my eyes and nostrils were not affected. I first tried to use a 4.5" grinder, and it worked ok. This tool is much more efficient, though. If you have a very small amount of tucking to do, then go ahead and use a 4.5" grinder, like the Harbor Freight model. You won't be able to attach a hose to it, so some deep cleaning will be necessary after doing work inside.

Scritto da: NameIDidntWant

Sort of works...

I recently used a Bosch surface grinder with a dustless attachment and I was blown away by how well it collected the dust. I immediately ran to Amazon to get a dustless tuckpoint grinder too, thinking this technology was really going to change my gritty, dirty life! Unfortunately, although the surface grinder was a home run, this tool is kind of a bunt . It probably gets 60 or 70% of the dust, but 30% of the dust from grinding out mortar is still an awful lot of dust. Also, it is pretty awkward to use as you can only hold the grinder in 1 position to get full depth grinding, and the hose comes off at a weird angle. Although the depth is adjustable, the angle at which you enter is not, as the whole apparatus is pinned in place by the side handle. I'll probably keep using it, but after the first 2 jobs I'm not terribly impressed. In Bosh's defense, it's a difficult problem to tackle.

Scritto da: Heidi Roth

Heavy and hard to use

I was hoping I was getting a quality grinder. Not only did I have to find a spacer because the blades don't fit in the dust catcher, but I have had the motor stop turning while doing simple grinding of mortar joints. Sad. I spent alot of money on this new setup. Also trying to grind things to the left you can't get withing 5-6 inches because all the knobs and things.

Scritto da: K. Kim

cool but needs more power and blade

The cover does a great job of dust collecting. The down side are it does not come with any blade and the power seemed low when I was cutting to demo tile on backer board. ALso would be nice to be able to bring the blade lower with the dust collector on. it can only cut in 1.5in with the cover on.

Scritto da: Bikerprophet

Powerfull

Heavy, a monster, eats mortar and did the job as designed, saved a lot of manual labor. If you need to do tuckpointing, this is the complete tool for you, worth every penny.

Scritto da: Cari B.

Happy

Excellent purchase, better than the grinders I buy from the distributor.

Scritto da: Josh

Excellent product

Excellent product

Scritto da: Allan Wind

Repointing stairs was really easy

I needed to replace some mortar on my front stairs. As expected hammer & chisel is a lot of work and takes forever. With this grinder it was almost too easy. The only issue is that you cannot get close to the walls as the vacuum attachment is quite bulky.