CURT 55537 Fahrzeugseitiger kundenspezifischer 4-poliger Anhängerkabelbaum, passend für ausgewählte Dodge Caravan, Grand, Chrysler Town und Country

Brand:CURT

3.6/5

69.25

Wenn Ihr Fahrzeug nicht mit einer Verkabelung zum Ziehen eines Anhängers ausgestattet ist, ist die kundenspezifische Verkabelung von CURT die ideale Lösung. Ein kundenspezifischer Kabelbaum – auch T-Stecker genannt – ist ein einfaches Plug-and-Play-Elektrogerät, das an das elektrische System Ihres Fahrzeugs angeschlossen wird und eine standardmäßige, universelle Anhängerverkabelung bietet. Dies erfolgt über zwei oder mehr fahrzeugspezifische, OEM-kompatible Steckverbinder zum Einstecken in die Rücklichtbaugruppe, sodass beim Einbau kein Schneiden, Spleißen und Löten erforderlich ist. Kundenspezifische Kabelbäume werden fahrzeugspezifisch angefertigt und sind zwar nicht für alle Fahrzeuge erhältlich, bieten aber eine der schnellsten, einfachsten und sichersten Möglichkeiten, ein Fahrzeug zum Abschleppen zu verkabeln. Dieser spezielle Steckkabelbaum verfügt über eine 4-Wege-Flachsteckerbuchse und ist als maßgeschneiderter Kabelbaum für bestimmte Baujahre des Dodge Caravan, Dodge Grand Caravan und Chrysler Town and Country konzipiert (Informationen zur Überprüfung der Fahrzeugkompatibilität finden Sie in den Anwendungsinformationen). ). Im Lieferumfang sind alle notwendigen Verkabelungskomponenten enthalten, um eine zuverlässige Anhängerverkabelung herzustellen, sowie eine Staubschutzhülle, um den Stecker sauber zu halten, wenn er nicht verwendet wird. Sie haben ein Bild von Ihrem nächsten Ziel im Kopf – vielleicht ist es die Bootsanlegestelle an Ihrem Lieblingsangelplatz, vielleicht ist es ein Campingplatz mit Blick auf eines der Meisterwerke der Natur, oder vielleicht ist es die nächste große Baustelle. Um dieses Bild in die Realität umzusetzen, bedarf es jedoch mehr als nur Tagträumen. Es braucht eine solide Verbindung und die richtige Menge an Leistung. Die kundenspezifische Verkabelung von CURT wird mit einer der fortschrittlichsten Technologien der Branche hergestellt und ist so konzipiert, dass sie einfach installiert werden kann, sodass Sie eine langlebige elektrische Verbindung für Ihre Anhängerkupplung erhalten.

STAUBSCHUTZHAUBE. Um eine lange Nutzungsdauer und Witterungsbeständigkeit zu gewährleisten, wird dieser 4-polige Kabelbaum für die Anhängerbeleuchtung mit einer Staubschutzhülle aus Gummi geliefert. Bei Nichtgebrauch passt es problemlos auf den 4-Wege-Flachstecker und schützt ihn so vor Witterungseinflüssen. EINFACHER GRIFF. Dank des ergonomischen Designs dieser Fahrzeugsteckdose ist das Anschließen Ihrer Anhängerverkabelung und Anhängerbeleuchtung ganz einfach. Es verfügt über Laschen an der Ober- und Unterseite für einen besseren Halt beim Ein- und Ausstecken in Ihren Anhänger. FAHRZEUGSPEZIFISCH. Dieser Aftermarket-Kabelbaum für Fahrzeug und Anhänger ist für ausgewählte Baujahre des Dodge Caravan, Dodge Grand Caravan und Chrysler Town and Country konzipiert. STANDARDANSCHLUSS. Diese steckbare 4-Flach-Anhängerverkabelung kann zum Anschluss von Anhängerrücklichtern, Bremssignalleuchten und Blinkern verwendet werden. Die 4-Wege-Verkabelung der Anhängerbeleuchtung ist bei einer Vielzahl von Anhängern beliebt und bietet vielseitige Anhängeroptionen für Ihr Fahrzeug. EINFACH ZU INSTALLIEREN. Kein Schneiden! Kein Spleißen! Dieses Anhängerkabelbaum-Set lässt sich in die vorhandene Werksverkabelung Ihres Fahrzeugs einstecken und stattet es mit einem standardmäßigen 4-poligen Anhängerverkabelungsstecker hinten zum Anschließen und Ziehen eines Anhängers aus.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 196 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎55537
Item Weight 0.31 Pounds
Item Weight ‎5 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55537
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55537
Product Dimensions ‎9 x 4 x 3 inches

3.6

13 Review
5 Star
74
4 Star
17
3 Star
3
2 Star
1
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Keith
Quick and easy
This was very easy to install, less than 20 minutes. Works great.
Scritto da: Tricker
Towing with lights is good
Read instructions, installed, lights up my trailer. Saved a bunch of money diy baby!
Scritto da: Alicia Mick
Ok
I wish there was a way to route it a diffrent way but had to come out the back when I use it because of the stow n go but it works fine just tuck it back in the trunk when not using
Scritto da: D. WALTER
Took a little maneuvering to install
When I bought this trailer light wiring harness for my 2005 Chrysler Town and Country, I thought it would be the same as with my 2005 Dodge Durango, and go on in a couple of minutes, but I was severely wrong. With this wiring harness, you have to push the ends of the wiring harness through a couple of prefab holes in your auto body. The problem with this is that there is insulation between the interior and exterior body panels, and the holes you need to push the wiring harness through can get pretty tight. The left side tail light was fairly easy with a larger hole in the body panel, I was able to put my hand in farther, and push the wiring harness easier. The Right side taillight was a little harder because the body panel hole on the interior was smaller, and a little lower than the exterior hole, so much more difficult to maneuver through the body. We ended up cutting the end of the right side wiring harness off, and running the wire through the panel, and then reattaching the harness end to the wire once it was through the body. Also, something I wasn't aware of with this harness is that the 4 pin connector is not maintained on the outside of the vehicle. This wiring harness stays inside the vehicle until you are ready to use it, and then you run the wires out through the back door whenever you're going to use it. The part I don't like about this harness is shutting the door on the wires. I know that there is weather stripping there, and it probably won't cut the wires by being closed on them, but I just feel it might degrade the life of the harness... Otherwise, so far so good. Decent wiring harness, somewhat difficult installation, but still functional, and decent quality.
Scritto da: Nicholas Maddox
Easy to install
Easiest install for any wiring project I’ve ever done!
Scritto da: John F
Quick use!!
Took about 5mins to install. I did not run it back through the body. I just ran the wires under the light assembly. Then pushed the wires inside the van 5mins tops. Didn't care for the ground wire. Had to use a drill Tel screw to the body. They could've tied that into the other white wires since the body harness for the lights is already grounded. Other than that no problems.
Scritto da: Keith J Rigden
Get it
Pretty easy to install in my 06 Grand Caravan. Routing to the passenger side requires you to fish it to the light cavity. Get a good look at what's going on there before you tie on. Wish the set was longer. Watched one video, but it was for another brand. This product is too short to route it their way, which is a little cleaner, but not a big deal. Only reason for knocking a star off. Worth every extra penny to not have splice anything!!
Scritto da: Ashish Desai
Very easy to install and worked with no issues
The harness is super easy to install on a 2005 dodge grand caravan sxt stow and go. Took about 20 minutes with no prior experience of knowing anything dodge or harness wiring. The self tapping ground screw worked instantly under the gamble and the length of excess wire is about 15 inches which is plenty to reach my trailer. Literally you can do this by watching a YouTube video on your phone and doing it same time. Definitely buy this kit and do not pay to get it installed ..you can do It yourself
Scritto da: Kevin from Calgary
Works well for my little trailer with LED lights.
Works well with my little trailer. Note that this kit does not contain a powered converter, so your trailer lights are powered from the vehicle's tail light wiring. If your small trailer has LED lights, this setup is fine. On my 2005 Grand Caravan, this kit will allow the trailer connector to extend outside the tailgate by a foot, or perhaps a little more. It takes a fair bit of cutting in the existing tail light wiring grommets for the hole to be large enough to push the connectors through to the space behind the taillights. That small tube of black silicon sealant is to reseal the grommet where you cut through. I used coil-style plastic wire loom to protect the wiring as it exits under the tailgate.
Scritto da: JP
Price was right, easy to install
Great price point, installed on an 04 caravan, took about an hr but never installed a trailer harness before. Good product!
Scritto da: Mr.Kent
works great.
no problems, works great.
Scritto da: Amazon Customer
... cable cannot be stored in the tire jack compartment like the other brand
It works with the exception that the plug is very tight and the cable cannot be stored in the tire jack compartment like the other brand. Minor problems. Seems to work OK.
Scritto da: Dompti
????
Parfait mais je l’es retourner je n’avais plus besoin.

Verwandte Produkte

hot
hot
AP Products 014-122106 Equalizer
3.4/5

€ 48.32

AP Products 014-122106 Equalizer
3.4/5

€ 48.32

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array