0
0

Gesamt:€ 0.00

Siehe WarenkorbKasse
LoginRegister
0

Gesamt:€ 0.00

Siehe WarenkorbKasse
LoginRegister

Fantech DB 10 Druckschalter-Kit nur mit Verzögerung

Brand:FANTECH

3.1/5

€
163.44

Volt: 115 und Ampere: 115

Keine Einheiten verfügbar

EAN: 0650737120108

Kategorien Industrie & Wissenschaft, Test, Messen & Prüfen, Druck & Vakuum, Druck- und Vakuummessgeräte, Druckschalter,

Schalter geeignet für 115-Volt-Versorgung. Nennleistung 2 Ampere. Tülle für Schläuche, 4 Drahtmuttern für den elektrischen Anschluss, 1 Paket mit Schaltermontageteilen. Abschnitt des NPT-Schlauchs 1. 1 DB10-Druckschalter mit integrierter Verzögerung 1 3 Fuß. Volt: 115 und Ampere: 115.
Brand FANTECH
Connector Type Clamp
Contact Type Normally Closed
Country of Origin USA
Current Rating 11 Amps
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 8.3 x 6.5 x 5.9 inches
Item model number DB 10
Manufacturer Fantech
Material Metal
Operating Voltage 120 Volts
Operation Mode Automatic
Product Dimensions 8.3 x 6.5 x 5.9 inches; 1.15 Pounds
Switch Type Temperature Switch
Terminal Screw

3.1

8 Review
5 Star
58
4 Star
14
3 Star
12
2 Star
8
1 Star
9

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Joanna Lewandowski
For dryer fan
Works perfect
Scritto da: P. Reynolds
Works now, but picky about where it's installed
I'm using this DB 10 pressure switch with theFantech RVF4XL Exterior Wall Mount Centrifugal Duct Fan, 4", 193 CFM and theFantech 9800000 RSK-4 Backdraft Damper, 4" Duct . The combination works perfectly, switching on and off when my dryer does, and boosting the dryer's airflow so my clothes get dry about 3x faster. So why only 4 stars? Two reasons. First, the DB 10 switch didn't work initially, and I nearly returned it. Buried in the instruction manual -- but not mentioned in the description or reviews here -- is the fact that the hole you drill into your duct (where the switch senses pressure) needs to be just before an elbow, so enough pressure builds up that the switch can sense it. My ductwork doesn't have an elbow -- i.e., a bend in the duct -- anywhere near where the switch and the fan need to go. I solved the problem by drilling the hole immediately before the RSK-4 damper, which blocks airflow and builds up the requisite pressure about as much as an elbow would. At the very least, the manual should suggest that arrangement, for people whose houses don't have space for a bend in the ductwork. And second, the stranded aluminum wire is a pain to wire-nut to solid copper supply lines and the solid copper lines on the RVF-4XL fan motor. At this price point, they could've used solid wires. Or they could have omitted the wiring harness entirely in favor of terminals on the switch.
Scritto da: RODERICK G.
porduct did not last
I bought the Fantech DB 10 pressure switch for the dryer booster on Dec 22, 2020. The product indicates 5 years warranty.. Unfortunately, product stopped working on July 10th, 2022. Does the warranty support this case..?
Scritto da: Ernest D. Kocher, Jr.
It fits
Easy to install, except for threading hose into lint filter holder
Scritto da: James D.
Replaced Old DB-10 Pressure Switch
I purchased this pressure switch to replace my old switch DB-10 that went bad after five years. I installed the new switch, which is the exact same part number, but it would not activate from my dryer pressure. The old one worked fine and this one works if I physically blow into the pressure tube. Apparently they changed something, now it takes more pressure to activate. They sent me a new switch with the same result.
Scritto da: David
P.O.SH
lost a customer. installed 2 both went out in 6 months. don't bother
Scritto da: Darren
works perfect.
This thing with it's timed cycle was exactly what I was looking for. I didn't use it for my dryer, I used for a duct booster for the vent system in my house, works perfect.
Scritto da: Randy
One Star
lasted 60 days and now does not work. Turns the fan on and off for no reason. Called their customer service and they are sending me a new one. Great customer service

Verwandte Produkte

hot
Fantech DB 10 Druckschalter-Kit nur mit Verzögerung
3.1/5

€ 163.44

Fantech DB 10 Druckschalter-Kit nur mit Verzögerung
3.1/5

€ 163.44

hot
Johnson Controls P70MA-1C Micro-Set-Steuerung für nicht korrosive Kältemittel, einpolig, Single-Throw, 100 bis 500 psi Hochdruckseite, niedriger Ausschnitt, 36 Kapillaren, 1/4 Bördelmutter
4.1/5

€ 487.39

Johnson Controls P70MA-1C Micro-Set-Steuerung für nicht korrosive Kältemittel, einpolig, Single-Throw, 100 bis 500 psi Hochdruckseite, niedriger Ausschnitt, 36 Kapillaren, 1/4 Bördelmutter
4.1/5

€ 487.39

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array

Gesamt:€ 0.00

Siehe WarenkorbKasse

Kategorien

Alle Kategorien
Speisekarte Kategorien Nahe Wagen

Menu