Freud PB-016: Precision Shear™ Forstnerbohrer mit gezahnter Kante, 2-1/8 Zoll

Name: Freud PB-016: Precision Shear™ Forstnerbohrer mit gezahnter Kante, 2-1/8 Zoll
Brand: Freud
SKU: 0008925028888
Price: 62.64 EUR
Availability: InStock

Brand:Freud

3.6/5

€
62.64

PRODUKTBESCHREIBUNG 2-1/8 (Durchmesser) Forstnerbohrer VOM HERSTELLER Präzisionsscheren-Forstnerbohrer verfügen über eine doppelt geschliffene, messerscharfe gezackte Kante, die während der gesamten Rotation des Bohrers schneidet, um Splittern und Absplittern zu vermeiden und makellose Löcher mit flachem Boden zu erzeugen . Dieses einzigartige geometrische Design verfügt über mehrere Schneidkanten, die eine stärkere Scherwirkung erzeugen und so schnellere Rotationsgeschwindigkeiten und effizienteres Schneiden ermöglichen. Wettbewerbsfähige Forstnerbohrer-Designs erzeugen kleine Späne und Staub, die sich im Schneidbereich ansammeln, wodurch Reibung und Hitze erhöht werden und der Bohrer dadurch schnell stumpf wird. Diese Designs erzeugen auch Löcher mit rauen Kanten, die geschliffen werden müssen. Zusätzlich zu den gezackten Kanten verfügen Precision Shear Forstner-Bits über einen Körper aus gehärtetem Stahl für eine längere Lebensdauer und schärfere Kanten, einen extrem scharfen Sporn, um präzise Löcher und weniger Laufbewegungen zu gewährleisten, sowie steil abgewinkelte Schneidkanten, um Löcher zu erzeugen, die glatt und flach sind.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0008925028888

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Bohrmaschinen, Teile & Zubehör, Bohrer Bits, Forstner-Bohrer,

Freuds eingeschränkte lebenslange Garantie. Steil abgewinkelte Schneidkanten – erzeugen glatte und flache Löcher und erzeugen „meißelartige Locken“ für eine schnelle, saubere Spanentfernung. Ultrascharfer Sporn, um ein präzises Startloch zu gewährleisten. Hochwertige geschmiedete Konstruktion für längere Lebensdauer. Rasiermesserscharfer Wellenschliff für schnelles und einwandfreies Schneiden. Spezifikationen: Durchmesser 2-1/8, Länge 3-1/2, Drehung rechts, Schaft 3/8.

Brand	Freud
Brand	‎Freud
Brand Name	‎Freud
Color	‎Multi
Country of Origin	‎Austria
Customer Reviews	4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Included Components	‎Drilling Boring accessory for Precision Shear Forstner Bits
Item Dimensions LxWxH	6.5 x 3.35 x 2.25 inches
Item Dimensions LxWxH	‎6.5 x 3.35 x 2.25 inches
Item Package Dimensions L x W x H	‎6.89 x 4.45 x 2.13 inches
Item Weight	‎0.43 Pounds
Manufacturer	‎Freud
Material	Blend
Material	‎Blend
Model Name	‎PB-016
Number of Items	‎1
Package Weight	‎0.2 Kilograms
Part Number	‎PB-016
Shank Type	Straight
Shank Type	‎Straight
Size	‎One Size
Suggested Users	‎Unisex-Adult
Surface Recommendation	‎Alloy Steel
Tool Flute Type	Straight
Tool Flute Type	‎Straight
Warranty Description	‎Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4457

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: MVS

Clean holes

Perfect for installing bypass door cup pulls

Scritto da: MB

The bit sheds large metal shavings in hardwood

I've used several different brands of forstner bits of the 2+ inch size. All of them, including the cheap ones are perfectly fine is softwoods like pine. Hardwoods are a completely different story. I make beer and wine flight boards as part of my woodworking buisness. I commonly like to use such species as Walnut, Maple, Oak, Cherry, Hickory etc.. For more moderate density hardwood like cherry, red and white oak, these Freud bits will cut slowly but do so with minimal buring. But for hard maple, walnut, hickory.. forget about it unless you have a VERY high amperage/HP drill press. This bit overheats quickly, throw off metal shavings and burn your project within the first 1/4 inch. The sidewalls are clean but the bottom blades are already dulling after only about 20 holes. And yes, I have my drill press setup to properly speed. Freud is usually my go to brand but I have been seriously disappointed in this particular bit. Here is a pic of the metal that this bit is shedding.

Scritto da: Aaron Ogilvie

Very nice and high quality

Only problem is that I want to find more holes to create. This was very sharp and cut beatifully. Perfectly formed thin shavings of wood covered the floor when I was done.....but I only had one door to do and so it now sits waiting for its next moment in the sun.

Scritto da: ChrisNorthJersey

These ARE the forstner bits you're looking for

There are lots of forstner bits out there with prices all over the map. I can imagine that for many purposes, a more inexpensive set will do the trick, particularly when narrower holes are needed. But my project in this case was to make a crayon/pencil caddy for my daughter. I needed to drill smooth and wide holes into a block of wood that I would ultimately be painting and clear-coating. Oh, and, I needed to drill them at a slight angle to the wood surface. The wider the bit, the more challenging the drilling is, so I did some research to find the ideal tool for the job. The wavy serrated outer edge of this bit is an advantage that cannot be overstated. Most forstner bits have teeth around their outer edge, much like a hole saw. While the inner cutter action is the same, the razor sharp serrated outer edge is a huge advantage when it comes to creating a smooth hole, and also when aligning and starting the hole since the outer perimeter of the hole can be projected better than with jagged teeth. On top of all that, the quality materials and build process from Freud make this a top notch bit that I'll be excited to use again. For a single bit it may be a bit pricey, but it was well worth it based on the results.

Scritto da: Kurt D. Hudson

Burns - Does Not Cut

This was a bad purchase. Freud blades are great, however, this tool skips, churns, clogs, .... basically it was a huge mistake. Put my slightly worn Porter Cable bit in after 2 inches of drilling in 15 minutes. The Porter Cable bit cut the next 1 inch cleanly with no burning or other problems in 1 1/2 minutes.

Scritto da: Aaron I

It's a good

I have several Freud serrated edge Forstner bits (and some non-serrated ones as well) and have used them for years. They're good bits (sharp out of the box, make clean holes, decent cutting speed, and hold their edge for a while), and are not overpriced. The serrated edge (like this one) cuts faster and runs cooler than the straight edge, but is slightly more difficult to sharpen by hand. I would recommend the serrated one over the traditional straight. That being said, these are not as good as Fisch bits (which are substantially more expensive). The Fisch bits make cleaner holes faster and last longer. So generally I get Fisch if I think that I'll use a bit often, and Freud if it's an odd size.

Scritto da: PS

Another Great Freud Product

I continue to be happy with the quality of Freud products. This 2 1/8 Forstner bit was better than anything I could find in my local hardware store and for less money.

Scritto da: graham c

dont be fooled by $$ only. you get what you pay for

cut like a charm. will last a life time . top quality. must be run at slow rpm

Scritto da: daniel

Dulls first

Dulls first cut, ok if you file every time

Scritto da: Bill Rutledge

Five Stars

excellent shearing. drills a large hole in no time at all. also good for creating mortises