Frigidaire 5303283286 6 untere Korbdichtung für Trockner

Brand:FRIGIDAIRE

3.6/5

66.28

Unsere robusten Medaillons werden aus Materialien höchster Qualität zu einem Bruchteil der Kosten von herkömmlichem Gips oder Holz hergestellt. Unser grünes, umweltfreundliches Material kann gestrichen, mit Gel gebeizt, marmoriert oder künstlich veredelt werden, wodurch es sich ideal für eine Vielzahl von Innen- und Außenanwendungen eignet. Die einfache Installation mit herkömmlichen Holzbearbeitungswerkzeugen und Klebstoff sorgt für eine dramatische Veränderung mit sofortiger Eleganz und Persönlichkeit. Verleihen Sie einem durchschnittlichen Deckenventilator oder einer uninspirierten Leuchte Luxus und Attraktivität oder werden Sie kreativ, indem Sie sie für einen innovativen Look an der Wand montieren. Für eine einfache Montage und auch abstrakte Gestaltungsmöglichkeiten bieten wir zweiteilige Deckenmedaillons an. Mit mehr als 400 Stilen zur Auswahl und einfacher Installation haben wir mit Sicherheit das perfekte Medaillon, um den Designer in Ihnen zu einem neuen Projekt zu inspirieren.

Keine Einheiten verfügbar
Die Verpackungshöhe des Produkts beträgt 1 Zoll. Die Verpackungsbreite des Produkts beträgt 11 Zoll. Die Verpackungslänge des Produkts beträgt 15 Zoll. Herkunftsland: China.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 112 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎5303283286
Item Package Quantity ‎1
Item Weight ‎0.16 ounces
Manufacturer ‎Frigidaire
Part Number ‎5303283286
Product Dimensions ‎4 x 2 x 3 inches

3.6

9 Review
5 Star
77
4 Star
12
3 Star
5
2 Star
2
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Amazon Customer
Easy For DIY
This is for my Kenmore. I pop the top. The top is held by 2 clips in the front. I disconnect all the plugs from the top control panel. The front panel is held by some square metal clips. Take out two screws and slide the control panel off the front panel. I keeps dropping the screws. So, I use my magnet stick to pick them up. Make sure you wear glove. There are a lot of sharp edges. The lower seal does not come with the glue. You will need to buy the Electrolux 5303937139 Dryer Drum Glide Kit. The glide kit comes with the glue. Pull the 2 old seals out. I use sand paper to sand out the old glue. Glue the 2 new seals to the panel. I first use clamps but they are not needed. I end up using the orange strap. The lower seal is a little longer than the old one. I may have stretch it too much. Make sure you wait for the glue to dry a little bit before you put the panel back. Otherwise, it will stink up your cloths. I post some pictures. Hope this review help.
Scritto da: T. Smith
Just what I needed!
Noticed that my clothes were coming out of the dryer with brown lines, googled the reason, and came to Amazon for the item (lower basket seal). What google did not tell me, was that this item only covered the two sides and the bottom. A couple reviewers mentioned that another piece (drum front felt seal) was needed for the top--thanks guys! So I went ahead and ordered it. That other part (drum front felt seal) came with the adhesive that is needed to secure the felt to the dryer. This item needed to be stretched just a tiny bit to connect with the sides of the other piece. Putting them on was a breeze, the time consuming part was putting the dryer back together. I have submitted 4 photos; first one is of this item, second is of the other item you will need, third is the old felt liner, last pic shows replaced liners.I have not washed anything yet, so cant say if the discoloration has stopped. Update 12/2020....no more brown discoloration on clothes since the replacement.
Scritto da: dls
Perfect Fit and Easy to Install
Watch the youtube video and it is easy to do. Also did the upper seal at same time, it was looking worn too. 20 year old Frigidaire dryer was leaving brown streaks on clothes. Not any more. Highly recommend.
Scritto da: and more
Great replacement!
First this product is an exact match to what was being replaced, thick, durable and reliable. The tricky part is installing it. Basically you must disassemble the dryer and remove the drum. Once you have the drum out, you must remove the existing felt bushing and residual adhesive from the mounting surface. Acetone works quite well. Remember that this item does not include adhesive, so plan accordingly. Happy repairs!
Scritto da: TrussBuilder
Perfect OEM quality and fit!
Though the picture lead me to believe it wasn't as wide as the upper seal I also replaced. It is actually a perfect OEM quality product. I recommend.
Scritto da: R. T. Griffith
Fits Frigidaire FSG447GHS0 Dryer Perfectly
Great product, direct replacement, easy to install, fast delivery, good communication.....smooth transaction!
Scritto da: Matthew Jones
refurbishing older dryer
Worked well on older dryer.
Scritto da: jan b. post
Felt gasket replacement for drum dryer.
Correct fiber seal for front drum. Only complaint is would of liked a tube of glue for the repair. Regardless the felt gasket worked at replacing the old one.
Scritto da: Retribution Specialist
Poor
Supposed to be OEM. Way too thick. Returned.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array