Kegco EBDHCK2-5T Deluxe Homebrew Two Tap Kegerator-Umrüstsatz für die Türmontage mit 5 Pfund CO2-Tank aus Aluminium

Name: Kegco EBDHCK2-5T Deluxe Homebrew Two Tap Kegerator-Umrüstsatz für die Türmontage mit 5 Pfund CO2-Tank aus Aluminium
Brand: Kegco
SKU: 0700697202496
Price: 571.15 EUR
Availability: InStock

Brand:Kegco

3/5

€
571.15

Mit dem Kegco Deluxe Kegerator-Umrüstsatz für selbstgebrautes Bier mit zwei Zapfhähnen können Sie einen Kühl- oder Gefrierschrank ganz einfach in eine leistungsstarke Zapfanlage für selbst gebrautes Bier umwandeln! Dieses Kit enthält alle hochwertigen Bierkomponenten in handelsüblicher Qualität, die Sie benötigen, von einem handelsüblichen Doppelanzeigeregler für sicheres und bequemes CO2-Management bis hin zu einer Tropfschale aus Edelstahl, die Tropfen und verschüttete Flüssigkeiten auffängt und die Reinigung erleichtert. Das Kit enthält sogar einen leeren 5-Pfund-CO2-Tank aus Aluminium mit einer auffälligen glänzenden roten Beschichtung, die eine zusätzliche Schutzschicht gegen Verschleiß und Korrosion bietet. Dieses Kit wurde für die Verwendung mit selbstgebrauten Cornelius-Kugelverriegelungsfässern entwickelt und enthält zwei Sätze von selbstgebrauten Fasskupplungen mit Kugelverriegelung, mit denen Sie aus bis zu zwei Fässern gleichzeitig zapfen können.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0700697202496

Kategorien Industrie & Wissenschaft, Geräte, Kühlschränke, Gefriertruhen & Eisbereiter, Kegeratoren,

Enthält einen brandneuen, leeren 5-Pfund-CO2-Aluminiumtank aus hochfester Aluminiumlegierung mit einer glänzenden roten Beschichtung, die als zusätzliche Schutzschicht gegen Korrosion und Verschleiß dient. Die beiden NSF-zugelassenen Bierhähne verfügen über geschmiedete Messingkörper mit hochglanzpolierter Chromoberfläche, Schaftbaugruppen und Hebel aus Messing mit antihaftbeschichteten Kugelscheiben sowie Wasserhahnknöpfe aus schwarzem ABS-Kunststoff. Die 10 breite, an der Tür montierte Tropfschale zeichnet sich durch ein klares Design und eine zuverlässige Edelstahlkonstruktion aus und kann mithilfe der beiden praktisch platzierten Schraubenlöcher an der Rückwand einfach installiert werden. Dieses Kit wird mit zwei Sätzen Kugelverschluss-Fasskupplungen geliefert, die jeweils sowohl eine Gaseinlass- als auch eine Bierauslasskupplung enthalten, damit Sie problemlos selbstgebraute Cornelius Pepsi-Fässer anzapfen können. Der Dual-Gauge-Regler ist robust konstruiert und sorgt für einen gleichmäßigen Durchfluss bei jedem Guss. Er verfügt über ein T-förmiges Einstellventil, mit dem sich der Druck im Inneren des Fasses leicht regulieren lässt.

Brand	Kegco
Configuration	Door Mount
Country of Origin	USA
Finish Type	stainless steel
Installation Type	Screw In
Is Discontinued By Manufacturer	No
Item model number	EBDHCK2-5T
Manufacturer	Beverage Factory
Model Name	EBDHCK2-5T
Number of Doors	1
Pattern	Solid
Product Dimensions	15 x 15 x 30 inches; 19.25 Pounds
Specification Met	NSF

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: craig

Good

Nice equipment just missing parts

Scritto da: bill dufner

Quality control could use some focus going further!

For me I am disappointed in the kit, yes it is all there! Yes it’s everything you might need. But you will end up replacing what inexpensive parts they have shipped you! I am mot new to the installation of beverage delivery systems! I had this shipped to a remote location to where it would be installed. This location is far from my home and I didn’t want to haul it up. Let’s start with the Good! Pretty bottle, great instructions, shipping was convenient and on time, packing was considerate as to no damage during travel! The bad Co2 lines are nicely color coded, but so incredibly stiff, and bundled so tight one kinked before even unwrapping it from its Sullifane wrap. The finger tightened clamps that come with the kit are so inexpensive they all leaked and I replaced them with a better clamps. The reusable seal on the Co2 had a divit in one side so I didn’t even try to trust it and replaced it with my own seal. The shanks were 2 different lengths for some reason but did have the same product number so probably a manufacturing issue. The ball locks had a bur on the Co2 side at the seam that you could not release from the fitting without it poking you. Again probably a manufacturing issue. Because of Murphy’s law, I anticipated most of the issues based on other reviews. But here is my honest opinion. Put the system together on your own, the faucets, the Sanke, the ball locks, the beverage lines, the Co2 lines. The regulator and shut offs. I knew I was puting too much trust into the name by reading the reviews. I could have done it less expensively and better quality made products. Get an exchange bottle instead of the pretty one! A lot of my issues may seam petty but anything under pressure should get it’s fair amount of attention to detail!

Scritto da: Amazon Customer

The listing for the kit contents is somewhat misleading.

The conversion kit is what I expected for the most part. Except, the kit doesn't completely match the Amazon listing. From the listing I purchased the product : "Includes a brand new empty 5 lb. aluminum CO2 tank made from high strength aluminum alloy with a glossy red coating that acts as an extra layer of protection against corrosion and wear." The product arrived in good condition and all items were as described except the tank. I received the KEGCO standard 5# cylinder, NOT the coated one as described...... I know it's a small thing, but when you make a purchase expecting something, you want what you ordered. I would have reached out to try and exchange just the tank, but Amazon seems only interested in returning complete orders and if there is a resolution process they hide it well. So I eat the 10-15 dollar loss in the value difference of the tank, as I am trying to get my new kegerator conversion up and running. Part of the reason I went with the KEGCO kit was for the sealed tank. I could have scrimped and bought components and put it all together for less like others have mentioned, but I liked the convenience, and the coated tank. Kit Components 4 out of 5. They aren't the top of the line, but they are good enough for a starter kit.

Scritto da: Urbancountryi

initially, I ordered the wrong kit for my husband ...

initially, I ordered the wrong kit for my husband, I contacted the company, they stopped shipment of the incorrect kit, sent us this kit and my husband loves it. I am a former professional beer taster (yes, that is a thing) and my husband wants to up his home brew game. He is in process of building a draft system for both beer and nitro coffee. (and maybe some home made root beer for the kids) Will update once we have everything up and running

Scritto da: Nolan Echols

Missing parts

Kit came in missing the regulator. Easy to put together though. Ordered another regulator while waiting on response from the seller

Scritto da: Joel Harmon

Update, hooked up my tanks

I hooked my tanks up, I think there may be a problem with the regulator?! There were parts missing. This kit is for two taps, and the only hoses I got were for the co2. (Red hose) I ordered the extra hose I needed for an extra $15. And had them the next day. My kit also came with the plain aluminum tank. If I were gonna do it again, I would just piece it together. When you take your shiny new tank in to get it filled they are gonna want to swap it or you may have to leave it till they can get around to filling it. To me, it would have been easier, cheaper, and more convenient to just get the rental, and pay the deposit. Then all you are doing is swapping their bottles. Seals or valves go bad the supply store fixes it, and you just get another bottle and keep pouring. Picking up my kegs tomorrow from my local home brew store. I will try to give you an update, after I find my co2 leak. Hope this helps.

Scritto da: RedGenetics

Works great!

My husband bought this for his shop fridge and loves it! Easy to assemble and set up. Works great!

Scritto da: Danny W.

Five Stars

It seems to be very good quality made a home bar for a wedding came out great