Leviton ODC05-UDW ODC-Serie 500 Quadratmeter Ft. Ultraschall-Präsenzmelder für Deckenmontage, 120–277 Volt, weißer Ultraschall, 500 m². Ft.

Name: Leviton ODC05-UDW ODC-Serie 500 Quadratmeter Ft. Ultraschall-Präsenzmelder für Deckenmontage, 120–277 Volt, weißer Ultraschall, 500 m². Ft.
Brand: Leviton
SKU: 0078477539989
Price: 193.44 EUR
Availability: InStock

Brand:Leviton

3.1/5

€
193.44

Die Leviton ODC-Serie kombiniert Netzspannungs-Präsenzsensoren und Fotozellen in einer eigenständigen Einheit. Das integrierte Design macht eine separate Verkabelung von Netzteil und Präsenzsensoren überflüssig und macht es zu einer kostengünstigen, effizienten Energielösung für Neubauten und Nachrüstungen. Für echte Tageslichtnutzungsanwendungen sorgen integrierte Fotozellen für konsistente Tageslichtdesignniveaus, indem sie die angeschlossenen Lasten als Reaktion auf das verfügbare natürliche Licht aktiv ein- und ausschalten, um die Energieeinsparungen zu maximieren. Leerstand-Timer analysieren und passen sich mithilfe der neuesten mikroprozessorbasierten Technologie kontinuierlich an sich ändernde Bedingungen an, um die Leistung zu optimieren. Auto ON/Auto OFF schaltet die Beleuchtung automatisch ein und hält sie eingeschaltet, wenn eine Anwesenheit erkannt wird, und schaltet die Beleuchtung automatisch aus, wenn der Raum frei oder nicht belegt ist. Kabelklemmen ermöglichen den einfachen Anschluss an einen Netzspannungskreis und eignen sich ideal für bestehende Gebäude mit eingeschränktem Zugang zur Verkabelung und für Neubauten.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0078477539989

Kategorien Werkzeuge & Heimwerken, Baubedarf, Baumaterialien, Türen, Garagentore, Openers & Parts, Beschläge, Sensors,

Einstellbare Zeitverzögerung: 30 s, 5 min, 10 min, 20 min, 30 min. Branchenexklusiver selbstkonfigurierender lokaler manueller Schaltereingang: Momentan- oder Dauerschalter werden unterstützt. Exklusive Durchgangsfunktion: Sorgt für höhere Energieeinsparungen, da das Licht nach nur kurzzeitiger Belegung nicht über einen längeren Zeitraum eingeschaltet bleibt. Konfigurierbar für Manuell EIN/Auto AUS oder Auto EIN/Auto AUS. Automatische Anpassung: Zeitverzögerung und Empfindlichkeit werden kontinuierlich an das Nutzungsmuster angepasst.

Batteries Required?	‎No
Brand	Leviton
Color	Image
Color	‎Image
Country of Origin	‎China
Customer Reviews	4.0 4.0 out of 5 stars 43 ratings 4.0 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎ODC05-UDW
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎ODC05-UDW
Item Package Quantity	‎1
Item Weight	0.75 Pounds
Item Weight	‎12 ounces
Manufacturer	‎Leviton
Mounting Type	Ceiling Mount
Mounting Type	‎Ceiling Mount
Number of Handles	‎1
Part Number	‎ODC05-UDW
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎4.8 x 2.5 x 1 inches
Size	‎500 Sq. Ft.
Style	‎Ultrasonic
Thickness	‎1 Inches
Warranty Description	‎Manufacture

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: SashimiW

Very happy

Far better than the RAB motion sensor ($80) I had... which failed 3 weeks in to use and kept the lights on all the time no matter how low the sensitivity was set. The dual technology is great with this motion sensor. I was even having false set offs with this because of heat movement in my basement. So I lowered the IR sensitivity and raised the US sensitivity and it's perfect with no false set offs anymore. Installation was moderately easy. If you know how to do wiring, as I learned, it's not too hard. You will need an octagonal or square wall box with at least 2" depth clearance for wiring. The only caveat is, and the reason I gave it 4 stars, you can actually hear a very low shrill sound with the US. I do mean a VERY LOW sound. Since I use it in an area that is high traffic with little to no lingering it's not something that annoys me, but if it were to be in a room that I had to stay in for a while then that sound would annoy. The cost is high compared to other sensors, but the quality is far greater as I have come to find out.

Scritto da: Jeffrey Allen Randorf

Works perfectly for my application but you need a 2" deep octagonal electrical mount.

This multi-sensor unit placed another simpler Leviton occupancy sensor that failed by turning on and off randomly. The ODC05-MDW is a complicated device but if you read the instructions you'll be fine. My application used most of the default settings. This is 120vac unit - no AC-DC converter needed. You do need a octagonal electrical housing of size 3.5" by 3.5" by 2" deep. I could not reuse the round electrical mount that my older Leviton used. I have attached the old-work octagon housing I obtained which is ready for the ODC05-MDW. I have also attached a photo of the original mount that didn't work with the ODC05-MDW (note the cover of the ODC05 is removed. I wanted a sensor that would immediate turn on in a hallway then shut off a few seconds later once I've left the area of the washer and dryer. And it does that perfectly. I'm only using the motion sensor mode, no IR (heat). The reaction time is very fast which a pause or delay from being in the area and the light being turned on. This unit works so well my next project for it will ditch the light switch.

Scritto da: T. Bozarth

Great for controlling garage workshop lights.

This was insanely easy to install - with no complex wiring whatsoever (using normal, 3-wire romex). You simply put this before your lights in the circuit with the load wire clipped into each side of the relay, and then T-the neutral into the neutral spot. That's it (I attached an image of the instruction booklet which shows this perfectly). Took me a total of about 10 minutes, and I'm not a wiring expert by any stretch. Now all the lights in my garage (35'x 20') are controlled by the sensor, and it works incredibly well, is sensitive to motion, and generally meets every expectation I had.

Scritto da: Bill Graham

A VERY GOOD OCCUPANCY SENSOR

It works better than the one that it replaced but it is a bit confusing. It is not quite as easy to set up than others. Note each occupancy sensor has different characteristics. I chose this among others in the manufacturer's catalogue because it best fit our needs in our family room - TV room, It has several filters to make it more suitable under varying ambient lit situations.I encourage you to download the instructions and read them before you buy one. If you have no trouble visualizing them, then it is a 4 or 5 star product.

Scritto da: Biser

Saves a LOT of money

I have one of these in my server barn controlling four eight foot long fluorescent fixtures ( 16 bulbs total ) - somewhat over five hundred watts of lighting. The unit works flawlessly turning on the lights as soon as the door is opened and turning them off a short time after I leave. Considering that I pay twenty one cents a kilowatt hour for power, this saves me a lot of money. I also don't have to stumble through the snow to turn the lights off when I go to bed. I'm going to get a second unit for my garage ( same lighting load ).

Scritto da: Mark

I use it to control my split 18000 btu ac ...

I use it to control my split 18000 btu ac unit. Bought it in 2016 but installed it 3 months ago, works perfectly so far.

Scritto da: Amazon Customer

Excellent product in my opinion

Bought this item to wire up my parents garage with a motion triggered light after somebody siphoned off a whole tank of gas out of their truck, and it so far, appears to be working well. It is so sensitive it can trigger on flying nightime bugs. I am so totally impressed with its' sensitivity that I am considering buying it myself. Excellent product in my opinion.

Scritto da: Lost My Mind

Works very well, extremely responsive and few false positives ...

Works very well, extremely responsive and few false positives. This works far more reliably than a wall-switch mounted motion sensor. The only issue with this sensor is that it will NOT fit into an "old work" box.