PC Products PC-7 Epoxidklebstoffpaste, Zweikomponenten-Hochleistungspaste, 8 Pfund in zwei Dosen, Anthrazit 128770

Name: PC Products PC-7 Epoxidklebstoffpaste, Zweikomponenten-Hochleistungspaste, 8 Pfund in zwei Dosen, Anthrazit 128770
Brand: PC Products
SKU: 0549831287704
Price: 174.00 EUR
Availability: InStock

Brand:PC Products

3.7/5

€
174.00

PRODUKTBESCHREIBUNG PC-7 ist das robuste Epoxidharz. Diese Epoxidpaste wurde für maximale Klebekraft formuliert. Beim Mischen reagieren die Komponenten A (grau) und B (schwarz) zu einer Verbindung von enormer Festigkeit. Die PC-7-Formulierung bietet eine längere Arbeitszeit für große und kritische Arbeiten, die es dem Benutzer ermöglicht, Arbeiten neu zu positionieren oder Änderungen vorzunehmen. Die hohe Nasshaftung oder Klebrigkeit von PC-7 Pasten-Epoxid erleichtert das Arbeiten über Kopf und an den Seitenwänden ohne Tropfen oder Durchhängen. PC-7 weist eine hervorragende chemische Beständigkeit gegenüber milden Säuren, Ätzmitteln, Reinigungsmitteln, Benzin, Heizöl, Salz und Süßwasser auf. Ungefähr gleiche Volumenmengen von A und B; Abweichungen beider Komponenten von bis zu 20 Prozent haben keinen Einfluss auf die Klebefestigkeit. Bei Bedarf können ein Teil A und zwei Teile B verwendet werden, um die Elastizität zu erhöhen (Dehnungsfugen usw.). Stellen Sie den PC-7-Behälter bei kalten oder kühlen Temperaturen vor der Verwendung in die Nähe eines Herdes. PC-7 lässt sich bei 80 Grad Fahrenheit leichter mischen und verteilen als bei 40 Grad Fahrenheit. Jede saubere, glatte, flache Oberfläche eignet sich hervorragend zum Mischen und Arbeiten. Ein kleines Spachtel oder ein flexibler Künstlerspachtel eignen sich hervorragend zum Mischen und Auftragen von PC-7. Zur Verwendung als Klebstoff: Holz, Metall (alle Arten), Glas, Ziegel, Block, Gummi, Beton, Stein, Schiefer, Glasfaser, Fliesen und mehr in allen Kombinationen; als Dichtmittel: Öl-, Gas-, Wassertanks, Kellerrisse, Drucktanks und Sanitärlecks; als Füllmaterial: Löcher, Gussteile, Muster, Formen, Hohlräume, Schweißnähte, Lenkräder und vieles mehr. Arbeitszeit (22 °C): 60 Minuten. Zeit der klebfreien Aushärtung: 160 Minuten. Servicezeit: 24 Stunden. Maximale Heilung: 7 Tage. Gardner-Schlagfestigkeit: 160 in./Lb. Leitung (elektrisch): nicht leitend. Ausgezeichneter Thermoschock. Nach dem Aushärten ungiftig. Hitzebereich: -20 bis 200 Grad F. VOM HERSTELLER PC-Products, der 75 Jahre „Fixing Your Things“ feiert, mit hochwertigen, zuverlässigen Reparaturprodukten. Reparaturlösungen für nahezu alles, was repariert werden muss oder kaputt gehen kann. Von der Restaurierung von Beton über Holz bis hin zu dauerhaften Hochleistungsreparaturen sind wir für Sie da. Ja; Wir können das reparieren

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0549831287704

Kategorien Industrie & Wissenschaft, Klebstoffe, Dicht- und Schmierstoffe, Epoxide, Fliesenepoxid Klebstoffe,

Der Anwendungstemperaturbereich beträgt 35 bis 115 °F und der Betriebstemperaturbereich -20 bis +200 °F. Füllt Löcher, Gussteile und Formen. Dichtet Öl-, Gas- und Wassertanklecks sowie Rohr- und Mauerwerksrisse ab. Verklebt viele Materialien, darunter Glasfaser, Holz, Beton, viele Metalle, Ziegel, Glas, Keramik und Gummi. Zweiteilige Mehrzweck-Epoxidklebstoffpaste dient als Haftvermittler, Dichtstoff und Füllstoff für eine Reihe von Innen- und Außenanwendungen.

Brand	PC Products
Color	Charcoal Gray
Compatible Material	Fiberglass, Brick, Glass, Ceramic, Concrete
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Form	Paste
Item model number	128770
Manufacturer	Protective Coating Co.
Material	Paste
Product Dimensions	13 x 6 x 6 inches; 8.49 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: william

Works

I tried 3 different products and nothing held. This product worked great. For those who said it didn't set up I can only say mine set within 3 hours. Over night it was a solid "weld". I suggest your not useing equal parts. For small batches I used a food scale covered in plastic wrap and weighed out equal parts. I mixed it in an old glass pie plate for easy clean up and mixing. Throw away after use.

Scritto da: charles parham

Been around for decades and always works great.

This stuff has been around for decades. Anyone old enough can remember seeing their display in a hardware store where they glued multiple items to a soda bottle. If you follow the directions the product will work as advertised. It has the consistency of thick peanut putter and will hold its shape after you mix it. It will not run like ordinary epoxy. Note, because it is so thick it will be difficult to mix in cold weather. It is best to warm it up for a few hours before you mix it.

Scritto da: VIPERICHNAPLES

Really good

Liked everything. 24 hour cure, really rood adhesion, recommended. BTW before I bought this from Amazon, I tries a big box home improvement store. They said they never heard of a 2 part paste epoxy....I like that Amazon always has what I need for projects that come up.

Scritto da: Another Grandparent

Would definitely buy again for an epoxy/adhesive need

The descriptions, reviews, and videos seemed to indicate the 5 things we wanted/needed and I will review each part: 1) quickly setting - absolutely, very happy with this 2) great adhesion - again, so far so great (will update if this changes) 3) not like super glue in which it immediately sticks or you can't see it and causes a mess 4) thick that would not run - almost a homerun (pardon the pun), it did try to flow downward due to gravity which I gave a 1/2 a ding for: you'll need to help it not move for several minutes 5) easy to work with and mix - decent to work but still rather thick and we had to use the entire containers for the amount needed which made it harder and longer to have to stir that amount and yet quickly to prevent setting. FYI you either have several things to throw away or spend a lot of time cleaning up - a mixing area, a mixing tool, and gloves which caused another 1/2 ding We had an interesting large project to do requiring the entire amount of one set which meant a lot of material to mix at once and it's very stiff so it looks easy or sounds easy and probably is in smaller amounts. Our project required a tubular area (PVC pipe) to be filled and then adhere to a smaller, non-round post area and this would be placed vertically on top of the post. We cut out cardboard to be a plug at the bottom and used fasteners to try to hold them up and contain the material. The mix was heavy enough and loose enough and slow enough to press down and move the cardboard a little overnight. However, we are VERY pleased with the results because it actually stuck so hard to the cardboard that it was difficult to pull off, the tubes are holding great, and we started using the project right away the next day. Remember, this PVC pipe has to be "attached" to a smaller, irregularly shaped post. Bottomline, it held as we needed, it dried as quickly as we needed, and was stiff enough to want to stay and not run. As the subject says, if needed again we won't hesitate to buy it. Just a couple of small things to watch out for, still a great product months later. Btw they have some of the most flexible options to buy the amount of material without breaking the bank. :-)

Scritto da: Mauricio Mancinas

El producto cuplé con el trabajo

El producto cuplé con el trabajo, Sostiene desde el primer momento de aplicar, tarda un poco en secado 100% pero cuando lo hace es como una roca, definitivamente lo recomiendo, asegúrese de mezclar partes iguales y por un poco más de tiempo recomendado en la etiqueta así secará perfectamente y en menor tiempo.

Scritto da: Dennis s.

Works good

Strong bond

Scritto da: Amazon Customer

Good stuff

Very thick! But not unmanageable. It says it works on some plastics. I used it to fill in low spots and holes on a plastic composite intake manifold. Adhered perfectly. I believe it can be used as a filler.

Scritto da: alfred lipp

Impervious to gasoline

I had a lawnmower with 2 9 inch holes in the deck. Used the epoxy and a metal screen to fix holes. Great buy!

Scritto da: Mr Thomas R D Law

None drip epoxy paste works really well

Used this paste months ago bedding some steel into wood. The paste adhered to the wood perfectly, it holds the steel in place securely. It has not shrunk and confidence is high that it will provide a permanent fix. Also a lot cheaper than some more well known equivalents.

Scritto da: Michelle R

Epoxy

This is very good for outdoor repairs on a log cabin. Bit pricey for the amount you get, also quite messy.

Scritto da: Zoltan

Two-pack Filler

Works as advertised, it is a bit soft when set.

Scritto da: gordon p.

Useless

Doesn’t work followed instructions left for a day touched it and part fell off useless

Scritto da: Colour of the Gods

I hope you're a bodybuilder

I needed 2 part epoxy to fix a crack in my concrete floor in an outbuilding. Jump on Amazon, find this, "Great!" I think to myself. Some of the reviews say that the consistency is a little bit thick, but that should be alright. So, just for context I'm a regular weightlifter (people who've used this will know where I'm going here), and am not a strongman or anything, but live/work on a farm and try and stay reasonable strong. Well I hope that you're prepared for a journey that ends with four C's (THICCCC) as this stuff honestly is the most difficult epoxy I've ever worked with. The consistency is almost unbelievable. I broke my trowel mixing and applying this, and worked up a massive sweat. It completely ruined the containers I mixed it in (not a big deal) and left behind lots of sticky/thicccc residue that I couldn't scrape up and use properly. I'm sure that this is strong as Atlas himself (still waiting for curing/drying), but if I'm destroying tools just trying to mix it then it's really not fit for purpose (for me). Maybe I got a bad batch? I'm not sure. But the batch I got really is unworkable I'm afraid.