Rain Bird BE50/4PK Tropfbewässerungs-Universal-Winkelstück mit Widerhaken, passend für alle Größen von 5/8, 1/2, .700 Tropfschläuchen, 4er-Pack

Brand:Rain Bird

3.7/5

21.51

PRODUKTBESCHREIBUNG Rain Bird BE50/4PKS Tropfbewässerungs-Universal-Winkelstück mit Widerhaken, passend für alle Größen von 5/8, 1/2, .700 Tropfschläuchen, 4er-Pack. Dieses universelle Winkelstück mit Widerhaken ist für die schnelle und einfache Verbindung zweier Längen von 1/2 Tropfschläuchen in L-Form konzipiert. Hochwertige Widerhaken greifen alle Marken von 5/8-, 1/2- und .700-Tropfschläuchen und sorgen so für eine schnelle, sichere und auslaufsichere Verbindung, die Saison für Saison an Ort und Stelle bleibt. Die perfekte Wahl, um Schläuche in einem Tropfbewässerungssystem zu reparieren oder zu verlängern. Das einzigartige Widerhakendesign reduziert den Kraftaufwand beim Einführen und die natürliche Farbe passt gut zu allen Erdtönen. Hergestellt aus äußerst haltbaren UV- und chemikalienbeständigen Materialien, um eine lange Lebensdauer zu gewährleisten. Empfohlener Betriebsdruck: 0 bis 50 psi. Die praktische Plastiktüte enthält (4) Ellbogen. Rain Bird Der intelligente Umgang mit Wasser. VOM HERSTELLER Rain Bird Corporation ist ein Privatunternehmen, das 1933 während des Agrarbooms in Kalifornien gegründet wurde. Wir gelten als weltweit führender Hersteller und Anbieter von Bewässerungsprodukten und -dienstleistungen. Mit Vertriebsbüros rund um den Globus; Wir bieten über 4.000 wassersparende Bewässerungsprodukte in mehr als 130 Ländern an. Von Anfang an hat Rain Bird das branchenweit umfassendste Sortiment an hochwertigen Bewässerungsprodukten für Bauernhöfe, Golfplätze, Sportarenen, Gewerbebauten und Häuser produziert und angeboten. In den letzten 80 Jahren hat Rain Bird weltweit mehr als 450 Patente erhalten. Einschließlich der ersten für die Bewässerung im Jahr 1935 auf unserem ursprünglichen Sprinkler mit Schlagantrieb (US-Patent Nr. 1.997.901), der die landwirtschaftliche Nahrungsmittelproduktion revolutionierte und weltweit eine neue Ära der Bewässerung einleitete. Im Jahr 1990 wurde dieser ursprüngliche Prallsprinkler von der American Society of Agricultural Engineers zum historischen Wahrzeichen erklärt. Unsere Produkte decken alle Aspekte der Bewässerung ab: Zeitschaltuhren/Steuerungen, versenkbare Rotationssprinkler, versenkbare Sprühkopfsprinkler, Sprinklerdüsen, Bewässerungsventile, Tropfbewässerung, Entwässerung und vieles mehr. Diese Produkte wurden weltweit in den größten und prestigeträchtigsten Projekten zur Bewässerung von Wohn-, Gewerbe-, Landwirtschafts- und Golfplatzanlagen ausgewählt und installiert. Rain Bird engagiert sich für die intelligente Nutzung von Wasser™ und erstreckt sich über die Produkte hinaus auf Bildung, Schulung und Dienstleistungen für die Industrie und die Gemeinschaft. Unser Vermächtnis besteht darin, nur Produkte von höchstem Wert und höchster Qualität zu entwerfen und herzustellen. Wir sind dankbar, dass wir von vielen unserer geschätzten Partner zahlreiche Anerkennungspreise erhalten haben. Rain Bird „Der intelligente Umgang mit Wasser

4er-Pack Winkelverbinder mit 1/2 Widerhaken in praktischer Plastiktüte. Empfohlen für einen Betriebsdruck von 0 bis 50 psi. Hergestellt aus äußerst haltbaren UV- und chemikalienbeständigen Materialien, um eine lange Lebensdauer zu gewährleisten. Kompatibel mit allen 1/2 Tropfbewässerungsschläuchen mit einem Außendurchmesser von 0,580 bis 0,700. Ermöglicht die Erstellung eines individuellen Layouts für Ihren Pflanzbereich. Mit Widerhaken versehene Enden greifen in den Schlauch und sorgen für eine sichere, auslaufsichere Verbindung. Anschluss zur Verwendung mit 1/2 und 5/8 Tropfbewässerungsschläuchen.
Country of Origin Mexico
Customer Reviews 4.6 4.6 out of 5 stars 3,592 ratings 4.6 out of 5 stars
Department Teak
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item model number BE50/4PKS
Item Weight 0.104 ounces
Manufacturer Rain Bird
Product Dimensions 0.9 x 0.9 x 2.15 inches

3.7

13 Review
5 Star
77
4 Star
15
3 Star
5
2 Star
1
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Reed Lloyd
Easy to install
This 1/2 inch Tee connector works better than most of my previous purchases and best price, too. It is much easier to install as well. Be sure to give yourself a little longer tubing at the joint to secure the installation. Recommend it.
Scritto da: Howard
Just what I needed
I brought our old hydroponic drip system back to life. This valve helped make things easy, allowing me to control the drip to just the flow I wanted.
Scritto da: JCKS
Work perfectly
These are fantastic. They do not leak after 2 years. No deterioration, no leakage.
Scritto da: Jan
Works Great
Easy to use ends the soaker line.
Scritto da: Dan
Only Rainbird products for me
Added to vegetable beds so I could turn on water only for actively growing beds. Also able to dial volume of water for the drip lines.
Scritto da: jweit
good for what I needed
Used to control water flow for flushing heater core while using the flushing tool.
Scritto da: Chris
Great for regulating fountain flow.
I bought a wall-hanging fountain that has an issue. The water, which comes out in 3 streams, is too strong causing splashing and noise. After several failed attempts to fix it, I thought of slowing down the water. I bought some 1/2" flexible tubing at Home Depot and this valve. I cut a piece of the tubing and installed the valve between the pump and fountain intake tube. After adjusting the valve to slow the flow, it worked pretty well. Now I'm happy.
Scritto da: J. Starmer
Drip Irrigation Project!
This review is for a variety of products all in one. This spring (2013) my wife and I put in 2 4'x20' raised bed gardens in the back yard for growing flowers and veggies. We live in Tennessee and the middle of the summer is hot and dry. I wanted a way to keep the plants watered and decided to convert a "spray zone" of our irrigation system to drip. I set up the garden with short rows that run the width of the boxes. I designed the garden with lots of short rows that run the 4' width of the boxes. Imagine a railroad track. The rails are the "feeder lines" that run the length of my setup, and the drip lines are the railroad ties that cut across the width of the garden (parallel with the rows of plants). I needed "feeder line" to bring the water to the drippers, and a variety of connectors to put it all together. I planned it all out on paper first, and then made sure I purchased enough parts. I purchased the following products for my setup: Rain Bird Landscape Dripline System 1/2-Inch Emitter Tubing With 18-Inch Spacing - 100-Foot Roll (5 stars) Rain Bird BT50-4PK Landscape Dripline System 1/2-Inch Barbed Tees, 4 Pack (5 stars) Rain Bird BE50-4PK 1/2-Inch Barbed Elbows (5 stars) Rain Bird EC50-Rain Bird GS50-10PK Landscape Dripline System 1/2-Inch Galvanized Wire Secures, 10-Pack (4 stars) 2PK Landscape Dripline System 1/2-Inch End Closure Fittings (5 stars) Rain Bird Landscape Dripline System Spray Head To Drip Connection Kit (5 stars) Rain Bird T63100-BULK 1/2-Inch 100-Feet Landscape Dripline System Blank Tubing Roll (5 stars) These parts were all high quality, and I am extremely pleased with the setup. I cut all the tubing to size and layed it all out prior to putting it all together. It is very difficult to fit the tubing over the barbs, but once on it stays in place and doesn't leak. My hands ached after putting a bunch of the tubing together, so I ended up using leather work gloves which made things go a lot better. A few things to note: 1) I don't have a rainbird setup, and this kit fit in great with my existing irrigation system. 2) The tubing is a bit stiff and can kink easily, but works very well, so be careful when connecting things. 3) The tubing and barbs are not the same inner diameter as stuff you can get at plumbing supply or home improvement centers. That means you can't mix and match, which is ok with me. 4) I used some teflon plumbers tape when attaching parts that screw in.
Scritto da: Ed
Simple and Effective
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Jim Anderson
Works as it should
I lost the first one I bought last year, so I purchased the exact same one this year, as I liked how it works.. Not much to say about it , controls water flow off and on , and anywhere in between.. I used this between my water fountain pump and my water fountain, as the pump put out too much pressure , so I had to reduce it down for the proper flow.
Scritto da: iseeinblackandwhite
Works great to join my 1/2 inch tubing to my 5/8 inch tubing.
A bit of a tight fit on the 1/2 inch tubing but I heated the tubing slightly with a heat gun to make it a bit more pliable and it works great. A hair dryer would probably work too as you are just warming the tubing up slightly. These fittings are far superior to the fittings that go on the outside of the tubing. Happy with purchase.
Scritto da: Chad
To expensive
The product works fine. Double the price of other ones.
Scritto da: Amazon Customer
Fits nicely
Very good, tight, and easy to install into my 1/2 inch low pressure garden irrigation system. No leaks at all and very EASY to push into the tubing.

Verwandte Produkte

hot
Orbit 1/2 Zink-Flow-Thru-Spike-Basis
3.6/5

€ 22.17

Orbit 1/2 Zink-Flow-Thru-Spike-Basis
3.6/5

€ 22.17

hot
Raindrip 646050B Stecker, Schwarz
3.7/5

€ 28.23

Raindrip 646050B Stecker, Schwarz
3.7/5

€ 28.23

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array