Seifenhalter mit Vacuum-Loc-System für die Duschwand, Seifenschale für die Dusche aus Stahl, beschädigungsfrei, 6,7 x 3 x 4,7 Zoll, Chrom

Brand:WENKO

3.1/5

43.56

Das preisgekrönte Vacuum-Loc-System verspricht zuverlässigen Halt auf luftundurchlässigen und unebenen Oberflächen ohne Bohren und lässt sich zudem unendlich oft wieder entfernen und neu positionieren, ohne Rückstände zu hinterlassen oder die Wand zu beschädigen. Die Befestigung kann auch mit Hilfe des Power-Loc-Klebesystems (separat erhältlich) oder mit den mitgelieferten Schrauben und Dübeln erfolgen. Es gibt eine 10-Jahres-Herstellergarantie. Die Montage des Vacuum-Loc-Systems erfolgt in 4 einfachen Schritten. Schritt 1: Reinigen Sie die Oberfläche mit einem sauberen, feuchten Tuch. Schritt 2: Befestigen Sie den Vakuumadapter, indem Sie die Kappe auf der Vorderseite und die Schutzfolie auf der Rückseite des Adapters entfernen. Es sollte mit den Pfeilen nach oben platziert werden. Schritt 3: Erzeugen Sie ein Vakuum. Drücken Sie die Pumpe gegen den Loc und ziehen Sie den Pumpenkolben heraus, bis ein Knackgeräusch zu hören ist. Entfernen Sie die Pumpe vom Loc, befestigen Sie den Pumpenkolben wieder und wiederholen Sie den Vorgang dreimal. Schritt 4: Sofort belastbar. Nach Schritt 3 kann der Adapter sofort mit Gewichten belastet und das gewünschte Zubehör eingehängt werden. Der Rollenhalter besteht aus hochwertigem, schwerem Zinkdruckguss, der verchromt und rostfrei ist.

REPOSITIONIERBAR: Dank des Vacuum-Loc-Systems können Sie den Seifenstückhalter für die Dusche mit der mitgelieferten Vakuumpumpe wieder anbringen und er bleibt immer noch stabil wie zuvor. Es kann immer wieder entfernt und wieder angebracht werden, ohne Rückstände oder Spuren zu hinterlassen! EINFACHE INSTALLATION: Der Seifenhalter für die Dusche ist einfach zu installieren. Sie müssen lediglich den Vakuumadapter an der Wand befestigen und mit der mitgelieferten Pumpe die Luft zwischen dem Schloss und der Wand entfernen. KEIN BOHREN: Für die Installation des Badezimmer-Seifenhalters ist kein Bohren oder Kleben erforderlich, Sie müssen sich also keine Sorgen machen, dass Ihre Wand beschädigt wird! STARK UND WIDERSTANDSFÄHIG: Der Dusch-Seifenhalter von WENKO ist stark und widerstandsfähig. Das Vacuum-Loc-System erleichtert die Haftung an der Oberfläche, bietet einen sehr starken Halt und kann mit bis zu 72 Pfund belastet werden. HOHE QUALITÄT: Der Duschseifenhalter von WENKO besteht aus hochwertigem verchromtem Stahl und ist rostfrei. Durch sein Design eignet es sich für die Aufbewahrung von Seifenstücken jeder Größe in Ihrer Dusche. Chrom.
Assembly required No
Batteries required No
Brand WENKO
Color Chrome
Country of Origin China
Customer Reviews 4.0 4.0 out of 5 stars 276 ratings 4.0 out of 5 stars
Fabric Type Chrome
Is Discontinued By Manufacturer No
Item model number Vacuum-Loc System Soap Holder for Shower
Item Weight 209 Grams
Item Weight 7.4 ounces
Manufacturer Wenko
Material Chrome plated
Maximum recommended load 33 Kilograms
Mounting Type Suction_mounted
Number of pieces 1
Product Dimensions 6.7 x 4.7 x 0.99 inches
Product Dimensions 6.7"L x 4.7"W

3.1

13 Review
5 Star
53
4 Star
20
3 Star
12
2 Star
9
1 Star
6

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: REG
Very Strong Holding Power!
I purchased three of these in 2017; one 6.7” wide, one 10.2” wide and one 20.5 “wide. I installed them on our smooth surface fiberglass tub surround. They are amazing. The large shelf holds four quart size bottles of my wife’s hair care products. My wife leaves them on the shelf when she uses the pump dispenser on the bottles which puts more force on the shelf. After about 18 months, one of the shelves came loose. I reinstalled it with the supplied vacuum pump and it was sturdy as before. I now have it marked on my calendar to use the vacuum pump on all the shelves once a year. We have well water and a water softener. The water contains a trace of salt. After three years the shelves started to show signs of rust. I removed them and painted them with silver spray paint. I then sprayed them with Rustoleum Clear Automotive Wheel Coating. They don’t have the shiny finish, but still look good. In retrospect, I wish I had sprayed them with the wheel coating when they were new. If you have a smooth surface, these will work great.
Scritto da: Neil
Bought in 2015 - still works great!
Amazing - bought in August 2015 and the suction held until January 2022 - over 6 years! I use suction grab bars in the shower and they get loose every few months. Fortunately I still had the pump so I remounted it and it’s holding firm. Who knows - it might last for another 6 years. Anyway, great little product with an excellent design that works ridiculously well. And don’t throw away the pump. :)
Scritto da: Watershed
Exactly what I wanted!
I was surprised upon moving into a new home that the guest bathtub/shower did not have anywhere to put a bar of soap. An alternative would be to use body wash, but still it would have had to sit on the edge of the tub. After searching a long time, I came across the Wenko vacuum-loc soap holder. Not only does it match the stainless steel looking faucets, it doesn't require any drilling (as the shower-surround is only acrylic). This vacuum system is extremely easy to install, and if the directions aren't sufficient, there are plenty of videos on the internet. I love the open style of this soap holder, as I hate containers that allow the bar of soap to sit in water. I recommend this easy-style soap holder for those in the same predicament as I.
Scritto da: wearyconsumer
Lousy installation guide - nice product.
It's attractive and nice enough and probably pretty secure, if you can figure out how to attach it. The enclosed directions show only diagrams on how to install - no text. Had to go to Wenko website for help. Finally, I was able to mount it pretty firmly, but I didn't like the location, so now I'm back to struggling to attach it. Update - it's up, looks great. Hope it stays up!
Scritto da: Cesarea Angulo
it works!!!!
AWESOME PRODUCT.... it stays put!!!! it really works!!! very happy with my purchase.
Scritto da: D. Fruchtman
Excellent product
No issues and sticks great in my kitchen sink. Gets bumped and used without problems.
Scritto da: Ed Carl
Soap dush
Works great easy to install
Scritto da: Leo
Horrible
They do not stick to wall! Do not buy.
Scritto da: Harry
Proper Suction is why expensive.
If you've been let down by the plastic scker version, then this is for you.
Scritto da: Ganfa
Excellent products
Great products, especially as there is no drilling or sticking and can be moved and repositioned any time. Would highly recommend
Scritto da: George McCrae
Doesn't remain on the wall
I had hoped the suction pump would solve the age old problem of these things falling off the wall, but it didn't and twice this soap dish crashed down into the bath in the middle of the night. It was attached to thoroughly degreased tiles and held only a single piece of soap. So I ended up throwing the rubber seal away, back-filling the disc with two-part wood filler, and velcro-ing it to the tiles where it has happily remained. The chrome coating looks likely to wear away soon so I suspect it will rust before long.
Scritto da: T. B. P.
Hält nicht an der Wand, hält keine Seife, nutzlos
Erstes und wichtigstes Problem: Hält nicht auf Fliesen. Fliesen, wohlbemerkt, auf denen andere Saugnapf- und Vakuumprodukte halten. Geputzt mit Allzweckreiniger und Reinigungsalkohol, gut trocknen lassen - hilft alles nicht. Die Ablage fällt innerhalb der nächsten 12h von der Wand, selbst wenn sie leer ist. Der Wenko-Support hat innerhalb von fast einem Monat nicht reagiert. Darüber hinaus sind aber auch die Stangen so weit auseinander, das lange bevor die Seife aufgebraucht ist sie ständig durchfallen würde, selbst wenn man es an die Wand kleben würde würde es also nicht funktionieren. Vollkommen funktionsfreier Müll also, unter keinen Umständen kaufen!
Scritto da: Amazon Kunde
Bin enttäuscht
Ich bin auf dieses Produkt gestoßen, weil ich etwas gesucht habe, wo ich nicht bohren muss. Laut Produktbeschreibung soll dies an den meisten Fliesen problemlos funktionieren.... Tja bei uns leider nicht. Die Ablage hat auch nach mehreren Versuchen nicht gehalten. Nach max 2 Stunden ist die Ablage mit viel Lärm runtergefallen. Wobei der Gummiring manchmal noch an der Wand hing. An der Duschkabine hielt sie dann doch noch u d das sogar bombenfest.... Mittlerweile haben wir es jedoch wieder abmontiert und eine Hänge - Ablage montiert. Fazit: Die Saugvorrichtung hält nur an glatten(!) Flächen. Sobald die Fliesen Struktur haben ist es eher frustrierend.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array