SharkBite 1/2-Zoll-Kugelhahn, Push-to-Connect-Messing-Rohrarmatur, Wasserabsperrung, PEX-Rohr, Kupfer, CPVC, PE-RT, HDPE, 22222-0000LFA 1/2-Zoll-Ventil

Brand:SharkBite

3.8/5

42.66

PRODUKTBESCHREIBUNG SharkBite 1/2-Zoll-Kugelhahn SharkBite verwendet hochwertiges Messing für unseren 1/2 x 1/2 Messing-Push-to-Connect-Kugelhahn mit einem einzigen Kugelhahngriff. Der Kugelhahn mit vollem Durchgang ermöglicht einen einfachen und ungehinderten Wasserdurchfluss durch das Ventil und bietet die zuverlässige Möglichkeit, die Wasserzufuhr schnell zu unterbrechen! SCHNEIDEN. DRÜCKEN. ERLEDIGT. Das SharkBite-Verbindungssystem macht jedes Sanitärprojekt mit unserer einzigartigen Push-to-Connect-Technologie schnell und einfach. Wenn Sie ein Rohr in die SharkBite-Schnellkupplungen einführen, beißen sich die Edelstahlzähne in das Rohr hinein und greifen es, während der speziell formulierte O-Ring zusammengedrückt wird, um die perfekte wasserdichte Abdichtung zu schaffen. Kein Löten, keine Klammern, kein Kleber. VOM HERSTELLER SharkBite ist das Steckverbindungssystem, das wirklich greift. Dies ist die einfachste Möglichkeit, Kupfer-, CPVC- oder PEX-Rohre in beliebiger Kombination zu verbinden – ohne Löten, Klemmen, Verbindungen oder Kleber. Führen Sie einfach das Rohr ein, und die Edelstahlzähne greifen und greifen fest, während ein speziell formulierter O-Ring zusammengedrückt wird, um eine perfekte Abdichtung zu schaffen. Ebenso schnell erfolgt die Demontage mit dem einfachen Trennwerkzeug. So können Armaturen und Ventile einfach ausgetauscht und wiederverwendet werden. Sie können nach der Montage sogar gedreht werden, um die Installation in engen Räumen zu erleichtern. Holen Sie sich SharkBite und nehmen Sie Ihr nächstes Sanitärprojekt in den Griff. Diese Armaturen sind bleifrei und erfüllen alle Anforderungen für Sanitärinstallationen in Kalifornien und Vermont.

Keine Einheiten verfügbar
VOM PROFIS BEVORZUGT: Alle SharkBite-Armaturen erfüllen die gleichen Standards für gewerbliche und private Sanitäranwendungen. QUALITÄT: Nur die Qualität und Leistung von SharkBite ist praxiserprobt. LEISTUNG: SharkBite-Absperrventile sind robust und für einen Druck von 200 PSI und 200 Grad Fahrenheit zertifiziert. VIELSEITIG: Die Sanitärarmaturen des Shark Bite-Kugelhahns passen auf Kupfer-, PEX-, CPVC-, PE-RT- und HDPE-Rohre und verbinden sie in jeder Kombination. INSTALLIERT IN SEKUNDEN: 1/2-Zoll-Kugelwasserventil erfordert keine Spezialwerkzeuge, kein Löten, kein Crimpen oder Kleben; Das Push-to-Connect-Design ermöglicht eine effiziente Anwendung, die Zeit und Geld spart. Drücken Sie einfach, um eine wasserdichte Abdichtung zu erzielen.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color ‎Brass
Country of Origin ‎China
Customer Reviews 4.8 4.8 out of 5 stars 4,616 ratings 4.8 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Ball Valve
Inlet Connection Type Cross Linked Polyethylene
Inlet Connection Type ‎Cross Linked Polyethylene
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1.3 x 2.3 x 5.4 inches
Item Dimensions LxWxH ‎1.3 x 2.3 x 5.4 inches
Item model number ‎22222-0000LFA
Item Package Quantity ‎1
Item Weight ‎6.7 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Number Of Pieces ‎1
Outlet Connection Size 0.5 Inches
Outlet Connection Size ‎0.5 Inches
Outlet Connection Type PEX
Outlet Connection Type ‎PEX
Part Number ‎22222-0000LFA
Product Dimensions ‎1.3 x 2.3 x 5.4 inches
Shape ‎Inline
Size ‎1/2 in.
Style ‎Valve
Warranty Description ‎Lifetime

3.8

13 Review
5 Star
86
4 Star
10
3 Star
2
2 Star
0
1 Star
1

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Mr. Dellbrook
First time using a push on ball valve
I added a shut off to the hot water exit pipe from the existing hot water heater. I did not want to do a solder joint because trying to rid all the dripping water from soldering process is a pain. For the 3/4 ball valve, I removed a 1-5/16" section of the existing copper pipe to insert the new push on fitting valve. With water turned back on....no joint leak!
Scritto da: meoff
NO MORE SWEATING
Had doubts at first but after reading reviews I replaced one outside valve and have to say that this is the best thing to come along since toilet paper!
Scritto da: Susan
Great product
Love the shark bite connectors.
Scritto da: Richard
You can do it!
No special skills needed. Pipe cutter or hacksaw and sandpaper. Clean off paint or corrosion. Cut out old valve. Push to connect new valve. Save a fortune.
Scritto da: mongoose
Works great
No leaks, easy push on install. Can’t ask for more.
Scritto da: james m.
Check size
Works well
Scritto da: Clinton A.
Can't beat a shark bite.
This was an easy install to replace an old shut off valve
Scritto da: fatty
Works Great!
Used this as a main water shut off to my house. It's operation is very smooth. The reason I used this shark bite valve is that it is easy to remove and replace if need be. The one I had installed years ago has lead in it which I just found out, and is not for potable water. Since it's well water and I have RO drinking water, I was not drinking the water but wanted to remove the valve for obvious reasons. This terrific valve will make future replacements a breeze without cutting pipes. I also used the fitting that converts from PVC to CPVC from well to house.
Scritto da: Amazon Customer
Easy install, does what it should.
Easy to install and works as it should. Well designed and quality manufacturing .
Scritto da: alcar
Shut the front tap!
I've been meaning (for 8 years now) to run a water line from our house into our attached garage. The main reason was for our fridge ice maker but I also wanted a hose access for those winter months. I finally decided to tackle the project. These are simply amazing. So easy to use and super fast. Once you prep your line properly, you simply push the line in the fitting, make sure it's seated all the way and Done! No more soldering. These are amazing especially for close quarters. Even if you mess up, you can simply remove them and fix your error. I have this one at the end of a temporary line that will go out the side of the garage this summer for an outside hose. (all the way to right of image) It's acting as cap right now but will be used to shut off the outside water during the winter months. Overall, these are a lifesaver. I know many people say these type of fittings don't last but I've seen homes that have had them for years with no leaks. I took a chance with these and I'm confident they will last a long time (hopefully forever). I highly recommend these especially if plumbing is not your thing. Pros: Super easy to install reusable solid, no leaks full brass fitting Cons: costly compared to normal fittings can only re-use so many times
Scritto da: Amazon Customer
unit easy to install
works like they say
Scritto da: J.R.
Easy to install
Wow, I am impressed at how easy this was to install on an existing line. And I have the coordination and manual dexterity of a 2-year-old. I wanted to put a shut off valve to the waterline feeding my outside faucet and prevent the line from freezing over during the winter. This works very well. Just push the line into the valve (with some force) until it no longer goes further in, do the same for the other side, you're done... well, clean the floor from some water dripping because you did not put a towel to catch it, and you're done! I would NOT have paid full price for this, but the discounted price made it a great purchase
Scritto da: ali a.
Easy to install
Good one

Verwandte Produkte

hot
hot
NIBCO S595Y 2 CXC 600# FP BV 3-PC
0.1/5

€ 785.76

NIBCO S595Y 2 CXC 600# FP BV 3-PC
0.1/5

€ 785.76

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array