Simpson Cleaning 40224 Morflex Series 3300 PSI Hochdruckreinigerschlauch, Kaltwassereinsatz, Innendurchmesser, Natur, 25 Fuß (1/4 Zoll)

Name: Simpson Cleaning 40224 Morflex Series 3300 PSI Hochdruckreinigerschlauch, Kaltwassereinsatz, Innendurchmesser, Natur, 25 Fuß (1/4 Zoll)
Brand: SIMPSON
SKU: 0879399001680
Price: 69.67 EUR
Availability: InStock

Brand:SIMPSON

3.8/5

€
69.67

MorFlex-Technologie sorgt für hohe Flexibilität und Knickfestigkeit, leichtes Polyestergeflecht für einfache Handhabung. Der MorFlex-Schlauch ist mit Gewindeanschlüssen mit Doppel-O-Ring-Design für 14-mm- und 15-mm-Anschlüsse ausgestattet und verfügt über einen 14/15-mm-Schlauchanschluss mit Gewinde. Der Polyurethan-Außenmantel ist kratzfest, abriebfest und für die meisten Gas-Hochdruckreiniger mit Standard-Gewindeanschlüssen geeignet. Bis zu einer Höchsttemperatur von 140 °F werden diese als Original-Schlauchersatz oder als Verlängerung eines vorhandenen Schlauchs verwendet. Auf 90 Tage limitiertes Zubehör

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0879399001680

Kategorien Patio, Rasen & Garten, Elektrowerkzeuge für den Außenbereich, Ersatzteile & Zubehör, Druckwascherteile & Zubehör, Hoses,

Haltbarkeit: 4-Zoll-Knickschutz an jedem Ende des Schlauchs verlängern die Lebensdauer des Zubehörs; Außenmantel aus Polyurethan lässt sich leicht abwischen; Betreiben Sie Ihre Hochdruckreiniger-Spritzpistole, Autowaschschaumpistole und anderes Hochdruckreiniger-Zubehör. Hochwertige Konstruktion: Die MorFlex-Technologie führt zu einem äußerst flexiblen und knickfesten Wasserschlauch; Das leichte Polyestergeflecht sorgt für eine einfache Handhabung und der Außenmantel aus Polyurethan ist kratzfest und abriebfest für eine verbesserte Haltbarkeit. Funktioniert mit den meisten Hochdruckreinigern: Dieser Hochdruckreiniger-Schlauch von MorFlex ist mit Standard-M22-Gewindeanschlüssen mit einem Doppel-O-Ring-Design ausgestattet und passt auf fast jeden Gas- oder Elektro-Hochdruckreiniger, einschließlich dieser Simpson-Modelle – 60763, 60551, 61016, 61083, 61118. Einfach Anschlüsse: Dieser Schlauch verfügt über branchenübliche M22-Schlauchanschlüsse mit Gewinde und kann mit Hochdruckreinigern bis zu 3300 PSI verwendet werden; Verwenden Sie ihn als Ersatz oder mit dem mitgelieferten Adapter als Verlängerung Ihres vorhandenen Schlauchs. Kompatibel mit kaltem Wasser: Der Hochdruckreinigerschlauch der MorFlex-Serie ist für Wassertemperaturen von bis zu 140 Grad Fahrenheit ausgelegt; Es eignet sich hervorragend für alle privaten und gewerblichen Zwecke zum Reinigen von Oberflächen wie Terrassen, Decks, Abstellgleisen, Fahrzeugen und mehr.

Brand	SIMPSON
Color	Natural
Country of Origin	USA
Customer Reviews	4.7 4.7 out of 5 stars 1,014 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	10.25 x 2.75 x 10.25 inches
Item model number	40224
Item Weight	2.2 Pounds
Manufacturer	FAIP North America
Material	Polyester
Maximum Pressure	3300 Pound per Square Inch
Product Dimensions	10.25 x 2.75 x 10.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Luigi bambino

Fits perfectly.

this hose arrived in two days and fits perfectly. My power washer is back in business!

Scritto da: Abdelrahman Aly

so far so good

works great and it comes with an adapter that (luckily) realized needed to be removed before it would connect to my pressure washer

Scritto da: Luanna McPherson

has standard quick connect

item is well made and worth the money spent

Scritto da: Jeff Miller

Good factory replacement substitute

I saved quite a bit of $ by purchasing this one rather than the manufacturer’s hose. Works just the same. Thank you

Scritto da: Alexcin43

Manguera

Ligeramente buena

Scritto da: AKO California

Handling both the 22-14 mm size and 22-15 mm size fittings saved me some money

I'm using this to connect to a spray gun to feed a sewer jetter hose and nozzle, but to a pressure washer that has the uncommon (in the US) 22mm diameter outside and 15mm inside diameter fitting. That size seems to be more common in European pressure washers or certain imported brands since that's what came up when I tried to search for adapters. Most pressure washers in the US seem to have a 22 mm outside and 14 mm inside fitting. The hose/gun combo that came with my inexpensive pressure washer was all custom fittings, so I could not use it to connect to the sewer jetter hose. This hose saved me from having to buy an adapter since it'll handle either size due to the two sizes of O rings on each end. I could then buy an inexpensive spray gun with a 22-14mm connector. So I saved by not having to buy an adapter. Those adapters are available, but I could only find them on specialty online stores or Ebay. The other choice was buying hoses and a spray gun made for those other brands, which were all much more expensive than the more common sized ones. Since this hose comes with an double male adapter with 22-14mm on one side and 22-15mm on the other, I can actually use it to extend the length of the hose that came with my pressure washer. I used it for several hours while clearing out a drain on two days, and it held up just fine. Then I just connected the other hose and did a little pressure washing on the outside of the house since I had it out. My pressure washer is only rated at 1750 psi, so nowhere near the rating of this hose. I was not using it on a rough surface, but the hose seems slippery enough that it won't wear out on the outside too quickly. It definitely was a good addition since the extended hose is a much easier length to use for washing my car, and I can now buy standard accessories if I ever need a special wand or new spray gun.

Scritto da: NOLA guy

Perfect fit

Bought one after OEM had a blowout. After the first buy and my pressure washer didn't have the airgaps that was experiencing with the OEM had decided to go from 25 feet of pressure hose to fifty feet. Wow only have to move the entire system twice to go the entire house, upstairs and downstairs. Highly satisfied!!

Scritto da: Wolfgang

Simpson Pressure Washer Hose

Have been using this Simpson Pressure Washer Hose fro more than one year and it is holding up well.

Scritto da: william m.

durability

one i bought this pressure washer hose because of money.i received a 2000 psi electric pow. washer for kree and not want to spend a lot of on getting it to work and worked it i did ther was no blow outs or problems. the hose is rated for 3200psi on a 2000psi pump and i reckon there will be no problems with this combination.thk you Bill

Scritto da: Daniel Crispin

Good value

Adding this to extend the lenght of the pressure washer hose that comes with basic models is great. Resolves many issues and prevents hose kinking quite a bit. The hose itself is low quality so it's not very flexible and will be very stiff when it's cold outside. But it still works well and improves the enjoyment of using the pressure washer quite a bit for a very low cost.

Scritto da: Richard M.

pressure washer hose perfect

After burning a hole in my original hose through carelessness, I went online to the company that manufactured the product. This was very unsatisfactory as their website and method of dealing with people is primitive. Finally, I said, forget it. Went to Amazon, bang. There was exactly what I needed. A reasonable price and works perfectly. Most importantly, the picture showed the type of hose it was with the fittings clearly visible.

Scritto da: Jamie

Perfect hose for the money!

Decided to nurf the simonize gun and line for this one with a universal gun to support my foam cannon. This works great!

Scritto da: James Donnelly

Did the job

Fit was good no leaks ,not to stiff good value for your money