Weller WSA350 120 V Tisch-Rauchabsorber

Brand:Weller

3.6/5

154.20

PRODUKTBESCHREIBUNG Die Kunst des Handlötens gibt es schon sehr, sehr lange, tatsächlich Tausende von Jahren. Aber erst 1941 entwickelte ein ungeduldiger amerikanischer Radioreparateur, der es satt hatte, herumzusitzen und darauf zu warten, dass seine Lötpistole aufheizte, eine transformatorbasierte Lötmethode mit sofortiger Erwärmung. Carl E. Weller musste bis nach dem Ende des Zweiten Weltkriegs im Jahr 1945 warten, um seine Weller Manufacturing Company in Betrieb zu nehmen. 1960 patentierte die Weller Manufacturing Co. in den USA den „Magnastat“-Lötkolben, der eine magnetische Komponente zur Regulierung der Temperatur an der Lötspitze nutzte. Im Rahmen einer Expansion nach Übersee ab 1959 wurde das Werk der Weller GmbH in Besigheim, Deutschland, zusammen mit neuen Werken in anderen Ländern gegründet, um temperaturgesteuerte Bügeleisen und Lötpistolen hauptsächlich für Industriemärkte in ganz Europa und im Nahen Osten herzustellen. Mit der zunehmenden Komplexität der Bedürfnisse unserer Kunden Schritt haltend, hat sich Weller Deutschland zum weltweiten Marktführer für die Entwicklung und Herstellung von Handlötprodukten entwickelt. Unsere Produkte trugen stolz das Prädikat „Made in Germany“, das für Innovation und Zuverlässigkeit steht. VOM HERSTELLER Der Weller WSA350 ist ein Tisch-Rauchabsorber, der Flussmitteldämpfe von einer Lötwerkbank entfernt. Ideal für Arbeitsbereiche, in denen aktivere Flussmittel mit bleifreiem Lot verwendet werden. Dämpfe werden vom austauschbaren Aktivkohlefilter absorbiert – inklusive einem Ersatzfilter (WSA350F). Der Ständer ermöglicht die Einstellung des Rauchabsorbers auf verschiedene Winkel. Der Lüfter ist leise und erzeugt keine nennenswerten Geräusche im Arbeitsbereich. ESD-sicher.

Der Lüfter ist leise und erzeugt keine nennenswerten Geräusche im Arbeitsbereich. Enthält einen Ersatzfilter (WSA350F), ESD-sicher. Dämpfe werden durch den austauschbaren Aktivkohlefilter absorbiert. Entfernt Flussmitteldämpfe von der Lötwerkbank. Ideal für Arbeitsbereiche, in denen aktivere Flussmittel verwendet werden.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 149 ratings 4.5 out of 5 stars
Included Components ‎1 Weller Branded Product
Is Discontinued By Manufacturer ‎No
Item model number ‎WSA350
Item Package Quantity ‎1
Item Weight ‎2 pounds
Manufacturer ‎WELLER
Material ‎Plastic
National Stock Number ‎3439-01-574-0013
Part Number ‎WSA350
Power Source ‎Hand Powered
Product Dimensions ‎11.3 x 10.2 x 7.1 inches

3.6

3 Review
5 Star
71
4 Star
20
3 Star
3
2 Star
1
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Brad H
Doesn't seem to have enough suction
I got this to be safe while soldering keyboard kits and it's definitely better than the cheapo one I tried before it, but I have to assume there are better options. It's very big. If you have a small workspace, this might be tricky to work around. It's loud. Not surprising, it's a fan and you need lots of suction to whisk the fumes away so I wasn't surprised by that. For it being so big and loud, it doesn't seem to have a lot of suction if you're not directly against the fan. For instance, I had it tilted down toward the board I was soldering, and if I wasn't 2-3" away from it, the fumes would still come up toward my face. It seems like the front of the fan could be changed to create more of a vacuum where as the wide front it does have doesn't really direct the power of the fan if that makes any sense. I've found that I almost need to have the fan tilted forward and my soldering job be almost underneath it. That makes soldering a bit tough so I have to get a lamp to point under there so I can see. It's not ideal, but it's better than sucking in bad fumes.
Scritto da: Gregory
I'm soldering for a good amount of time and going through quite a bit ...
I do stained glass, and when I'm working on a sizable project, I'm soldering for a good amount of time and going through quite a bit of brushed on flux. My work room is small and has just a small ceiling exhaust fan. I looked at a lot of options and did a lot of online research before buying this. There are a lot of smoke absorbers with the same 5" square filter, and most of them are cheaper than this. My decision came down to a question of air flow. This fan seems to have the highest CFM rating of any that I found. The cheapest competitors are much lower. I wanted to make sure that the fan pulled as much of the smoke as possible away from the work. I'm very happy with the result, as I never see smoke drifting toward me and can't even smell the flux being burned away. The whole device is very solidly built. No cheap parts anywhere that I can see. It should last a long time. There's nothing loose, nothing that looks like it will break or fall apart. Nice construction, and nothing that looks "cheap". Some web sites indicate that this is a "quiet" fan, which I suppose is true compared to a lot of other fans, but in my small space it's very noticeable. When listening to music, I have to turn up the volume a little. The fan doesn't screech or make any noise itself, but there IS a lot of air being moved. The trade off between a little more air noise and a lot less smoke is one I'll take every time. The mounting legs for the unit are small but sturdy, the whole fan is fairly light and easy to move with a convenient handle on the top. Being able to adjust the intake angle is great, and it's very easy with this product. I can get it fairly close to my work at a good angle and that helps keep the smoke down. The whole thing is a little big for my work area, but I can't imagine a smaller device that would do the job, so I think I've got the best possible in this regard until someone changes the laws of physics. You need a high amount of airflow, and a smaller device would have to be very, very noisy. Net result: Outstanding performance for the job, a little louder and bigger than I'd like but probably the best that can be done today. I'm glad I didn't purchase any of the less expensive competitors.
Scritto da: Andrew
Perfect for a hobbyist/occasional soldering!
This is a great little unit for the money! While someone who solders every day/all day (or with lead-free solder, which creates more fumes) will probably want something more powerful/bigger than this, this extractor does a fine job of sucking up flux fumes for hobby use or occasional soldering, which is more my application (I'm a soldering novice who bought it for audio electronics work). I'm not working in the most well ventilated room, and this thing does just fine keeping the air clean. It feels like a good quality, well made unit with a bit of heft to it. It's not terribly loud, but not exactly quiet either. You do need to have it fairly close to what you're soldering for it to suck up all the fumes - it won't work as well from several feet away (it also helps to point the fan inlet directly at what you're working on). So it's fine for things from quick and simple jobs up to component replacement on a smaller to medium sized PCB board. I'd say in the grand scheme of things, it's probably a 4/5 score - but I'm rounding up to 5 due to being a good value for the money IMO. Just be realistic about what a tabletop unit like this can do and you won't be disappointed.

Verwandte Produkte

hot
Weller WSA350 120 V Tisch-Rauchabsorber
3.6/5

€ 154.20

Weller WSA350 120 V Tisch-Rauchabsorber
3.6/5

€ 154.20

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array