Whetstone Cutlery 8-stufiger Wand-Schwertständer, robuster, wandmontierter Samurai-, Katana-, Wakizashi- oder jeder Standard-Schwerthalter mit stilvoller, eleganter schwarzer Oberfläche – Heim-, Zimmer-, Büro- oder Dojo-Dekoration

Name: Whetstone Cutlery 8-stufiger Wand-Schwertständer, robuster, wandmontierter Samurai-, Katana-, Wakizashi- oder jeder Standard-Schwerthalter mit stilvoller, eleganter schwarzer Oberfläche – Heim-, Zimmer-, Büro- oder Dojo-Dekoration
Brand: ‎Whetstone Cutlery
SKU: 0844296024704
Price: 71.20 EUR
Availability: InStock

Brand:‎Whetstone Cutlery

3.4/5

€
71.20

Die Schwerter Ihrer Sammlung werden nie besser aussehen als in dieser unglaublichen Holzausstellung. Befestigen Sie das Deluxe-Schwertdisplay zum Aufhängen an der Wand und lassen Sie Ihre Schwerter zum Mittelpunkt der Dekoration in Ihrem Wohnraum werden. Zu den Merkmalen gehören: Holzkonstruktion mit schwarzem Satin-Finish. Haken zum Aufhängen zur Wandmontage. Hält acht Schwerter. Abmessungen: 3 x 17,5 x 39 Zoll

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0844296024704

Kategorien Sport & Outdoor, Sport & Fitness, Sonstiges Sport, Kampfsport, Waffen Ständer,

PERFEKTES GESCHENKSTÜCK: Suchen Sie nach einem perfekten Geschenk für den Schwertliebhaber in Ihrem Leben? Ein Akzent zur Erhaltung ihrer kostbaren Schwerter ist ein unglaubliches Geburtstags- und Weihnachtsgeschenk für alle Schwertliebhaber, Schwertsammler/-liebhaber oder Liebhaber klassischer Stücke! Unkomplizierte und einfache Installation: Dieses Paket wird mit bereits angebrachten Hängehalterungen geliefert, deren Löcher genau ausgerichtet sind und die Heringe genau passen – bereit zur Montage! Stecken Sie einfach zuerst die abgeschrägte Kante des Dübels in das Loch und drücken Sie die Dübel vorsichtig mit einem Hammer hinein. 8-stöckiges, langlebiges Wandregal: Sie müssen sich nicht entscheiden, welches Ihrer Dutzend Schwerter Sie ausstellen möchten! Verfügt über stabile Aufhängehaken und Löcher auf der Rückseite, um bis zu 3,9 Pfund und 8 verschiedene Schwertarten mit einem perfekt ausgewogenen Gewicht sicher zu tragen. STILVOLLER SCHWERTAUFHÄNGER: Präsentieren Sie Ihre schönen Stücke in Ihrem Zuhause, Zimmer, Büro oder Dojo und verwandeln Sie Ihren Klingenkram in eine Reihe atemberaubender Wanddekorationen, während Sie gleichzeitig ihre atemberaubende Schönheit und Geschichte zur Schau stellen. Arrangements, die Ihre Gäste in Erstaunen versetzen! Mehrzweck-Schwertständer: Verwandeln Sie die Schwertsammlung in eine historische Waffenkammer! Verfügt über hochwertiges Holz mit 8 offenen Schlitzen und stabilen Wandhaken zur Aufnahme einer Vielzahl von Schwertern – von Samurai, Katana, Wakizashi, Tanto, Holz-Bokken bis hin zu Lichtschwertern und mehr!

Brand Name	‎Whetstone Cutlery
Color	‎Black
Customer Reviews	4.3 4.3 out of 5 stars 229 ratings 4.3 out of 5 stars
Included Components	‎Deluxe Wall Hanging Sword Display - Holds 8 Swords
Item Dimensions LxWxH	‎3 x 17.5 x 39 inches
Item Package Dimensions L x W x H	‎39.5 x 3.75 x 2.5 inches
Item Weight	‎0.01 Ounces
Manufacturer	‎Trademark Global
Material	‎Wood
Model Name	‎Deluxe Wall Hanging Sword Display - Holds 8 Swords
Number of Items	‎1
Package Weight	‎1.7 Kilograms
Part Number	‎20-WS8W
Size	‎3''x17.5''x39
Sport Type	‎Fencing
Suggested Users	‎unisex-adult

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Nathaniel Wayne

Awkward Assembly

The last time I got a rack like this the "pins" that hold the sections together were tapered so the tip went in easily until the wider bit caught and more or less locked it in place. In this one those same pieces are a uniform shape that barely fits in the opening, I actually split one of them by accident trying to get it in. It still works, and is a solid piece once put together, just be aware.

Scritto da: Jon M

Great value, 16" on center, would buy again

The uprights are 16" on center, which is great for mounting, and the "pinned tenon joint" if that's the right word is a simple and effective way of joining this material which would not do well with threaded fasteners. I can't tell if it's a PVC type material or good old MDF, but it's pretty sound for what it is. The wall mounts seems to be sturdy enough, and with the nails they provide it actually feels really "clicked in place" when you hang it on the wall. The price is very right for this one, I would buy another of these if I needed it.

Scritto da: Cassidy Kauffman

Arrived Broken Twice!

The first time it arrived, the wood piece was broken. The second time, the wooden pin were busted. I tried to do another replace, but I was not able to after two times. Look elsewhere.

Scritto da: Token

Cheap construction for the cheapest price.

It's the cheapest price (product and shipping) and therefore the cheapest made. But it still cost more than it's worth I believe. It works for what it is intended for but I mean come on! It's four peices of wood fastend together with four wedge shaped peices of wood. Why does it cost so much?! OH, OH! You get two already fastened cheap hanger hooks as well! What is that? Like 10 dollars extra? I'm sure if you could make this on your own it would cost no more than the wood and the patience to do so. And you would do a better job. I don't have the tools to do so and therefore here I am reviewing this 'ok for what it is' product. It should at least have a better paint job and instructions for the snap together impaired. Though I had no problem putting it together but I had to look at the picture on Amazon to make sure I was using the correct cross piece on the top and at the bottom. HINT, the curved piece goes on top! So to wrap this up. Didn't come in a box (just wrapped in plastic and thrown into an Amazon shipper box). Didn't have a very good paint job. Didn't have any instructions. Didn't have to be so overpriced. So three stars because three means OK. Check out the pictures I added to see more!

Scritto da: Thomas R. Ehrmann

Sink-or-Swim Assembly, but it Does the Job

This thing didn't include any bloody instructions! On that account, setup was a little weird- I didn't want to launch into it unguided, as it seemed like I could easily break this thing, but thankfully, the other reviews here helped. Turns out, you basically have to hammer the wooden pins into the holes on each cross-piece to get it to stick together. Once you get it together, it doesn't seem particularly sturdy, but I'm of the mind that it doesn't need to be to perform its job adequately. After all, it sees only slightly more action than the average framed picture at my home, and bears the weight of my five swords (more to be added) without complaint or failure. Perhaps a bit pricey for what you get, but it works.

Scritto da: Blaydese

Got two of them, painted and mounted, look and work great. Just need to fill them up. :-)

PRO: 1. Cut well, no odd cut marks, etc. 2. As described, and ready to assemble. 3. Hanging mounts already attached. 4. Printable. CON: 1. Particle board. Not solid wood, so be ready for that, and if you force these, they could break. 2. Two of the assembly pegs were dried out and crumbled apart, but I made some spares. 3. The pegs that did not crumble were really tight, so I had to sand them down a lot. OTHER: 1. Once painted, assembled, and mounted, they look great. 2. If you have the time and wood shop, you could make these yourself, but I'm just too busy. 3. Take you time, these are not super strong, so be careful.

Scritto da: Online Shopper

Serves its purpose fine.

Very easy to assemble without instructions. Holes align fine, pegs fit snug. Used a hammer on a longer wooden piece on top of the peg to gently push in pegs. Yes, it's light particle board, but it will hold swords just fine as long as you don't slam them in or do something incompetent with it. The least expensive price I've found online at the time of purchase. The brands namings are different but the sword rack had the same model number as other stores.

Scritto da: Mikey

Worth the money to me!

Despite reading it's not a solid wood piece, I decided to purchase anyway. If for no other reason it'll work for now, and I'll use it as a template for when I make my own out of a nice hardwood. That being said, I found that this is pretty nice looking the way it is, nice black paint, a bit loose feeling, but once it's hanging and all my swords are on it, it won't matter. Yes there's no building instructions, but it's pretty easy, I didn't have to do any modifications. As far as the wooden dowels, just get something with a flat tip, and a hammer. Put the beveled edge of the dowel into the hole first, then start gently hammering. I did it, no splitting of the wood, no problem.

Scritto da: Esmaeil T.

This is not the quality of Amazon. ????????????

This production is not in the right size mentioned in the post and it is actually 6 cm shorter and when I wanted to return the seller made lots of problems and at the end said he is going to measure it himself. Measuring after sale???!!!!