AAA 90036 Kit de pompe de rechange pour nettoyeur haute pression triplex horizontal, 3200 PSI, 2,8 GPM, arbre 3/4, comprend le matériel et le tube de siphon, pour machines à gaz industrielles, noir 9.6GA12 3200PSI à 2,8 GPM

Name: AAA 90036 Kit de pompe de rechange pour nettoyeur haute pression triplex horizontal, 3200 PSI, 2,8 GPM, arbre 3/4, comprend le matériel et le tube de siphon, pour machines à gaz industrielles, noir 9.6GA12 3200PSI à 2,8 GPM
Brand: SIMPSON
SKU: 0879399002069
Price: 492.10 EUR
Availability: InStock

Brand:SIMPSON

3.5/5

€
492.10

Conçue pour dépasser les attentes, la pompe triplex professionnelle 90036 AAA® est très efficace et minimise la charge du moteur tout en offrant des performances optimales. Ce kit de remplacement de pompe facile à installer est destiné aux nettoyeurs haute pression à essence* avec un moteur horizontal et un arbre de 3/4 de diamètre, comme le Honda GX200. Cette pompe peut produire jusqu'à 3200 PSI à 2,8 GPM. Le 90036 est conçu avec deux roulements à billes surdimensionnés pour réduire la friction et permettre des performances durables dans les environnements de nettoyage les plus difficiles. Le 90036 est doté d'un déchargeur intégré en acier inoxydable doté de notre système de démarrage facile. (*Vérifiez l'orientation de l'entrée et de la sortie de votre nettoyeur haute pression pour assurer la compatibilité)

Aucune unité disponible

EAN: 0879399002069

Catégories Patio, Lawn & Garden, Outils électriques extérieurs, Pièces de rechange et accessoires, Pièces détachées et accessoires pour nettoyeurs haute pression, Accessories,

Connexions standard : cette pompe de rechange dispose d'une entrée de tuyau d'arrosage et d'une sortie de tuyau haute pression filetée M22 ; Utilisez-le avec de nombreux tuyaux de nettoyeur haute pression, y compris les modèles Simpson MorFlex 40224, 40225, 40226 et le modèle Santoprene 41182. Sachez quand changer votre huile : le voyant et la technologie avancée de joint d'huile éliminent le besoin d'une jauge. Avec une visibilité sur le niveau d'huile et l'huile elle-même, vous pouvez facilement voir quand les niveaux d'huile sont bas ou si l'eau a brouillé l'huile. Puissance réglable : la pompe comprend la technologie PowerBoost qui fournit une pression plus élevée à la buse pour une expérience de nettoyage plus efficace ; Il y a aussi un bouton rotatif qui vous permet de réduire la puissance à votre convenance pour les tâches qui nécessitent une pression plus faible. Compatibilité : le modèle de boulon standard SAE s'adapte à de nombreux nettoyeurs haute pression à gaz avec moteurs horizontaux. Pour assurer la compatibilité, assurez-vous de faire correspondre l'orientation du moteur, le PSI, le GPM, le diamètre de l'arbre du moteur et la connexion d'entrée et de sortie de la pompe actuelle. Prolongez la durée de vie de votre nettoyeur haute pression : économisez de l'argent en remplaçant votre pompe au lieu d'acheter un tout nouveau nettoyeur haute pression. Ce kit facile à installer est idéal pour les laveuses à pression pouvant supporter 3200 PSI à 2,8 GPM pour laver les murs, les trottoirs, les véhicules, etc.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SIMPSON
Brand	‎SIMPSON
Color	Black
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 177 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Pump
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	12 x 9 x 4 inches
Item Dimensions LxWxH	‎12 x 9 x 4 inches
Item model number	‎90036
Item Package Quantity	‎1
Item Weight	9 Pounds
Item Weight	‎9 Pounds
Manufacturer	‎simpson
Material	Stainless Steel
Material	‎Stainless Steel
Maximum Flow Rate	2.8 Gallons Per Minute
Maximum Flow Rate	‎2.8 Gallons Per Minute
Measurement System	‎US
Part Number	‎90030
Power Source	Gas Powered
Power Source	‎Gas Powered
Product Dimensions	‎12 x 9 x 4 inches
Size	‎3/4" Shaft
Style	9.6GA12 3200PSI @ 2.8GPM
Style	‎9.6GA12 3200PSI @ 2.8GPM
Thickness	‎N/A Inches
Warranty Description	‎5 year warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: AMoran

Easy fix for an amateur!

This was so easy to install on my pressure washer- especially with the short how to video. Save yourself a ton of repair up charges and do it yourself- even a novice, like myself, could handle this. It too me a little longer than the video because my original pump was rusted onto the shaft- but I saved $300 doing it myself vs taking it to my small engine repair guy.

Scritto da: Dani

Correct Application

Arrived as promised

Scritto da: Redbird567

It works

I bought this to replace a AAA Pressure Washer Pump 8.7GA12 that came on my Simpson Aluminum ALH3225 Pressure washer. Install was super easy, four bolts off, four bolts back on. Works fine. I hope Simpson is reading as my original pump was/is still under warrantee and I was approved for a replacement back in October of 2020, it is June of 2021 and it is still not in. No amount of calling customer service helps because , well, it's not there fault or problem. All warrantee is handled by a third party. Remember that the next time you want to buy anything made by Simpson.

Scritto da: R. English

Exact fit and easy peasy

It was nearly six months after I purchased this before I got around to changing it out. My Simpson Power Washer was new and I had used it only one time in fall. I tried to clear out the water in the pump when I was done and put it away, but I did not use the antifreeze kit that is small pressure can and that cost me the pump. The next time I went to use it, the winter cold had frozen remaining water in the pump and that made it totally ineffective and lost all pressure. I was pleased to find this and ordered it. The repair shop wanted close to $250 to examine the unit and I had to drive an hour just to drop it off so this replacement part was a much more desireable option. I didn't know what to expect until I replaced it. It took me less than 10 minutes to put the new pump on. Four bolts and the original slid off the keyed shaft, I then slid the new pump on the shaft with attention to aligning it to the key and tightened up the bolts and done! Totally repaired and very happy with this part and ease of repair.

Scritto da: Paul A. Skinner

OEM Replacement Pump

After lots of research, I bought/installed this pump, which is a perfect OEM replacement for the original AAA pump on my Simpson pressure washer. It bolted up to the engine without any problems. The three-star rating for longevity is based on my research that revealed that this pump is not worth rebuilding. One upgrade: this pump includes an adjustable pressure regulator that was not adjustable on the original.

Scritto da: Uncledavemann

Horrible customer service

I bought this to replace a pump that would not allow water to flow through my pressure washer pump when connected to a water source prior to starting the engine. My old unit was in storage for about a year or so. This pump arrived in bomb proof packaging and I had high hopes that it would suit my needs. It did not, so I called the customer service number included with the pump to figure out what could be the issue. As I told the customer service rep from AAA when she informed me that she had no way of knowing what shape my new pump was in when I received it as I didn’t buy it from them directly, “ this could have been delivered to me by dropping it out of an airplane and it would have been just fine”. Unfortunately, it had the exact same issue as my old unit ; when connected to the hose, prior to starting the pressure washer, no water would flow through the pump. So I called the customer service number included with the replacement pump to find out if there was any possibilities that I was some how doing something wrong. The rep asked me if I had installed the pump already. My reply was that I couldn’t know it was defective unless I installed it. She told me that immediately voided the warranty! ??? I explained that I was only looking for technical info as to why a brand new pump would fail in the same manner as the old seized pump, again thinking the problem would some how be something I was doing in error. The rep refused to offer any suggestions other than to pay out of pocket at one of their service centers as I had voided the warranty by actually installing it myself. Why sell to the public if they can’t do the install? Never found out what the issue was with the new pump as I was able to fix the old one with a few careful taps from a hammer. Thank goodness for amazons generous return policy as this is not a cheap item.

Scritto da: Dave

The pump will fail with out water.

I purchased this to replace the original pump on my Simpson pressure washer which was almost new. The pump works great and is the same as on the original pressure washer. I would caution that the pump works great as long as the water is turned on. The pump is of a very good quality but has plastic valves - if the water stops the pump heats up very quickly and the plastic valves just melt and the pump no longer functions. This was my experience - the water stopped and the valves melted. I purchased the entire pump since just the valve portion was not available.

Scritto da: Francisco Ponce

Súper buena y potente

Facilísimo de instalar y súper buena inversión

Scritto da: Gatorzz

Perfect

Perfect

Scritto da: Gerard l.

Très performant merci

Va surpaire bien