Anderson Metals - 56123-0806 Raccord de tuyau en laiton, mamelon hexagonal réducteur, tuyau mâle 1/2 x tuyau mâle 3/8 1/2 x 3/8 1

Name: Anderson Metals - 56123-0806 Raccord de tuyau en laiton, mamelon hexagonal réducteur, tuyau mâle 1/2 x tuyau mâle 3/8 1/2 x 3/8 1
Brand: Anderson Metals
SKU: 0719852920380
Price: 28.48 EUR
Availability: InStock

Brand:Anderson Metals

3.6/5

€
28.48

Le raccord de tuyau à mamelon hexagonal réducteur Anderson Metals est en laiton et possède des raccords filetés National Pipe Taper (NPT) mâles. Ce raccord à mamelon hexagonal réducteur a une extrémité plus petite que l'autre pour connecter deux tuyaux filetés de diamètres différents, et il a une tête hexagonale pour une surface d'appui accrue lors du réglage du raccord avec une clé. Il a des filetages NPT mâles pour se connecter à des tuyaux filetés femelles, créant un joint plus serré que les filetages droits. Ce raccord est en laiton pour une résistance à la corrosion, une ductilité à haute température et une faible perméabilité magnétique. Le laiton peut être connecté au cuivre, au laiton, au plastique, à l'aluminium et à l'acier soudé. Les températures de fonctionnement de ce raccord vont de -53 à 121 degrés C (-65 à 250 degrés F). Ce raccord est conforme aux spécifications de l'American Society for Testing and Materials (ASTM) B584 et de l'American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 pour l'assurance qualité. Les raccords de tuyauterie sont des composants utilisés pour connecter, terminer, contrôler le débit et changer la direction de la tuyauterie dans de nombreuses industries différentes. Lors de l'achat de raccords de tuyauterie, tenez compte de l'application, car cela affectera le type de matériau, la forme, la taille et la durabilité requise. Les raccords sont disponibles filetés ou non filetés, dans de nombreuses formes, styles, tailles et calendriers (épaisseur de paroi de tuyau).Anderson Metals fabrique des raccords en laiton, des vannes et des mamelons de tuyauterie. La société, fondée en 1951, a son siège social à Kansas City, MO.

Montant

Ajouter au panier Acheter maintenant

EAN: 0719852920380

Catégories Industriel et scientifique,

Ces raccords contiennent du plomb et ne sont pas autorisés par la loi fédérale à être installés pour l'utilisation d'eau potable aux États-Unis et dans ses territoires. Remarque : veuillez vous référer au tableau des tailles de tuyau ou de filetage avant de commander. Conforme aux spécifications ASTM B584 et ASME/ANSI B16 pour l'assurance qualité. Les températures de fonctionnement varient de -53 à 121 degrés C (-65 à 250 degrés F). Laiton pour la résistance à la corrosion, la ductilité à haute température et la faible perméabilité magnétique. Filetages mâles National Pipe Taper (NPT) pour le raccordement à des tuyaux filetés femelles, mamelon hexagonal réducteur pour raccorder deux tuyaux filetés de diamètres différents. Remarque : Les tailles des raccords de tuyau sont basées sur la taille nominale du tuyau. Pour déterminer la taille correcte nécessaire, mesurez le diamètre extérieur du filetage et sélectionnez la taille du tuyau au-dessus qui correspond au diamètre extérieur du filetage. taille sur le tableau des tailles de raccords de tuyauterie.

Brand	Anderson Metals
Color	Brass
Connector Type	Nipple
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
International Shipping	This item can be shipped to select countries outside of the U.S.
Item model number	56123-0806
Item Weight	0.11 Pounds
Manufacturer	Anderson Metals
Material	Brass
Number of Pieces	1
Package Dimensions	3.58 x 2.36 x 1.46 inches; 1.76 Ounces
Size	1/2" x 3/8"
Thread Type	Connecting to Female Threaded Pipes

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Wilson

EXACTLY WHAT I AM LOOKING FOR

This is exactly what I am looking for. Very satisfy.

Scritto da: Octavius

Perfect for Weber Grill or Ooni pizza oven

I got my Weber Genesis II grill setup the other day, then realized the quick connect it comes with is not ready to attach to my stub. God knows why they do this, but they send you a quick connect with 3/8 female NPT threads, when most homes have female 1/2. Why they don't ship it with a 1/2 male connection is a mystery. I remember 2 years ago when I bought my dad his grill that he had the same issue, but assumed at the time it was because their house was 40 years old and nonstandard. So anyway, I ordered this and some Teflon/PTFE tape for same day delivery, since weirdly no one in town stocks this connector. Make sure not to use the white stuff, it's way too thin and would require too many wraps to make a proper seal. Technically if you're following code, you'd need pink since it's spec for gas piping with 1/2" threads and over, but I'm sure yellow would be fine. The yellow stuff is cheaper at your local hardware store, but I just got my tape with the connector since it wasn't worth an extra trip (and no one in town stocked pink). Once I got it in and taped up both sets of threads, I screwed it tight into the Weber quick connect, then screwed the quick connect to my gas stub. After that I checked it for leaks with soapy water just to be safe and fired up my grill. It's much more compact that Webers suggested black iron pipe, and looks a lot cleaner too. I know this is an issue for the Genesis II grills, but I assume you'll need one for the new Genesis as well. My dad also got an Ooni natural gas pizza oven and faced the same situation, so if you have one of those you'll probably need this part as well.

Scritto da: Stephen

Good

Good

Scritto da: Blake3

Well made

Seemed like a well made part, although received wrong size

Scritto da: Amazon Customer

Good quality.

Got the job done, would recommend

Scritto da: Pam Kirkendall

Must have part for Weber Grill Natural Gas Hookup!!

Purchased a Weber Spirit II Natural Gas Grill. This part is essential to attach to the “quick release” hose that comes with the grill to then attach to the shutoff valve. DO NOT try to use a reducer that had a “flanged” end. It will NOT work.

Scritto da: Kennedy

Perfect fit for connecting my NG grill

Purchased this adapter to convert the 1/2” gas line connector from my house to the 3/8” gas line from my Weber Genesis grill. Easy to install and was a perfect fit. Tested the connections and no signs of leaking.

Scritto da: Kathy

Poorly machined

The 1/4” side is fine but the 3/8” side wasn’t fully machined so the threads won’t catch the female end I’m trying to connect. I’ve even used other 3/8” fitting to make sure it’s the correct size, and they all connect perfect. But this one just keeps turning and won’t catch.

Scritto da: L. Baydak

Machining defect.

There was a ridge line crossing all the threads on the 1/2" NPT part of the fitting. In the photo you can see a dark like running down the centre of the bright illuminated stripe. I suspect that it was a manufacturing defect (from a die maybe?). I can feel it catching my fingernail. Anyway. The fitting is scrap, since it would be near impossible to make a good seal, what with the sharp edge scoring and cutting holes and gaps in any thread tape or sealant I used.

Scritto da: Jabus

Not correct 3/8 size

3/8 sizing is incorrect

Scritto da: Amir G.

Great fit

Used this to connect my 1/2" gas supply line to a 3/8" quick connect adapter. Fits great and seems to be of good quality.

Scritto da: Amazon Customer

The size in the description is not correct

I went to the hardware store and got the correct fitting in five minutes. Some things are just better done in person.

Scritto da: Justine Milton

Works great!

I used this for my natural gas BBQ connection with some yellow pipe dope. I have been using it for many months and it has not developed any leaks or corroded outdoors. Very happy with the purchase!