APEC Water Systems Faucet-HC-RIA-NP Rialto Distributeur d'eau potable à osmose inverse instantanée chaude et froide Nickel brossé

Brand:APEC Water Systems

1.8/5

517.13

Robinet de distribution d'eau sans plomb à double température certifié NSF pour une utilisation avec les systèmes d'eau potable à osmose inverse d'APEC ainsi qu'avec le système d'eau chaude instantanée d'APEC Water ou d'autres systèmes d'eau chaude standard à connexion ¼. Ces robinets d'entrée ¼ ont un système de ventilation intégré pour une utilisation avec des réservoirs chauds ou en conjonction avec des robinets de cuisine, de préparation et de bar. Ils sont entièrement compatibles avec l'osmose inverse et d'autres systèmes de filtration lorsqu'ils sont utilisés avec le système Instant Hot. La poignée en métal solide contrôle la valve à disque en céramique ¼ de tour lisse et durable, permettant à l'eau pure de couler à tout moment. Dotés d'un bec pivotant à 360° pour une utilisation facile, ces robinets haut de gamme offrent le mélange parfait d'une forme et d'une fonction exceptionnelles. APEC Water ne distribue ni ne vend nos produits à des vendeurs tiers sur . Veuillez acheter des produits APEC Water authentiques auprès de ou APEC Water directement pour l'authenticité.

Doté d'un bec pivotant à 360° pour une utilisation facile. Vanne à disque céramique ¼ d'entrée et ¼ de tour. Robinet de distribution d'eau sans plomb à utiliser avec les systèmes Instant Hot et d'osmose inverse d'APEC. Robinet design haut de gamme à double température.
Batteries Included? ‎No
Batteries Required? ‎No
Brand APEC Water Systems
Color Brushed Nickel
Color ‎Brushed Nickel
Country of Origin ‎USA
Customer Reviews 2.8 2.8 out of 5 stars 5 ratings 2.8 out of 5 stars
Finish ‎Brushed
Included Components ‎faucet
Installation Method Single Hole
Installation Method ‎Single Hole
Is Discontinued By Manufacturer ‎No
Item model number ‎FAUCET-HC-RIA-NP
Item Package Quantity ‎1
Item Weight ‎4.21 pounds
Manufacturer ‎APEC Water
Mounting Type ‎Deck Mount
Part Number ‎FAUCET-HC-RIA
Product Dimensions ‎12 x 12 x 2 inches

1.8

5 Review
5 Star
20
4 Star
20
3 Star
0
2 Star
37
1 Star
23

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Atulya T.
Looks good but problem with hot water
The media could not be loaded. We installed the faucet with the APEC instant hot water system. The cold water work but the faucet drips if the setting is set to hot. When reduced to warm the dripping stops. I contacted support and their solution was to keep the setting at warm. Kind of defeats the purpose!! We renovated the kitchen and this was a replacement for old insinkerator system. In retrospect not a good idea on our part
Scritto da: jenny kirk
Great look great dispenser
The first one came quickly but wrong finish then ordered a replacement in the chrome finish. We replaced an older cold filtered and insta -hot dispenser faucet and love this new one. The flow is much more then the old one and the spout swivels . Great looking and now matches my Rohl kitchen faucet.
Scritto da: LF
Do NOT purchase this spigot
Do not buy this. Spigot sprays water all over, as if there is grit in the screen (but I took it apart to check and it is clean). Also, if filling a glass with cold water, when I close the lever, the water continues to flow for ~20 seconds (wasting a lot of water) and the last 10 seconds or so the water flows HOT! I didn't realize that to get hot water you have to hold the lever down (safety feature?). Not bad, just unexpected as in the past the hot lever worked the same as the cold lever (you could turn it on and it would stay on until you returned the lever to the off position). Unfortunately, I ordered this during COVID yet waited to install until I felt it was safe to have a plumber into my home. Then there was high demand and I had to wait weeks before plumber was available. I couldn't know this was faucet was such poor quality until it was installed, and by then it was too late to return it. And, it cost me $150 to have it installed so I feel like I am stuck with it until it totally fails. VERY DISAPPOINTING as I did a lot of research and even spoke with company representatives to make sure I was making a good choice. I was assured this was a quality product and that I would be happy with it. HA. BTW also note the unit is wider than most... it may not fit if you have a soap dispenser on your sink, in addition to a garbage disposal vent and a sink faucet, too, all on one half of your sink.
Scritto da: Jeff
Stylish and functional hot and cold filter tap
Well made tap with easy installation. Hoses are well marked and color coded so the possibility of connecting it the wrong was is nearly impossible. Easy to use with ceramic valves so handles will remain in the same position over time. All and all as good quality and the big manufacturers with a different look.
Scritto da: Eric Paoli
Good product
Looks nice

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array