0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Attwood 94110-5 Kit de matériel de plaque de montage pour transducteur de bateau de qualité marine résistant aux UV

Brand:attwood

3.7/5

€
44.32

Attwood facilite le réglage, l'ajout ou le remplacement de votre transducteur. La plaque en polymère de qualité supérieure ne se déforme pas et ne se corrode pas ; installation rapide. Attwood Corporation est un leader primé dans l'ingénierie, les tests et la fabrication de produits marins de la plus haute qualité depuis plus de 100 ans. Nous fournissons un éclairage sûr et fiable, des systèmes de carburant, des systèmes d'eau, des sièges et des piédestaux, des échelles de bain, des tissus d'ameublement personnalisés et des accessoires marins généraux faciles à installer et conformes à la réglementation.

Montant
Ajouter au panierAcheter maintenant

EAN: 0022697941107

Catégories Sports et plein air, Sports et Fitness, Navigation et voile, Bateaux et équipement, Quincaillerie, Quincaillerie de pont,

Les produits Attwood sont à la fois compatibles et fiables, conçus et construits avec une attitude de ne jamais échouer. Tout le matériel inclus. Se monte facilement avec seulement 2 vis. Matériaux haut de gamme ; insensible aux rayons UV. La plaque en polymère de qualité marine ne se déforme pas et ne se corrode pas.
Brand Name ‎Attwood
Color ‎Unspecified
Customer Reviews 4.6 4.6 out of 5 stars 434 ratings 4.6 out of 5 stars
Included Components ‎Transducer Mounting Plate
Item Dimensions LxWxH ‎0.75 x 1.01 x 15.5 inches
Item Package Dimensions L x W x H ‎11.7 x 3.25 x 0.75 inches
Item Weight ‎0.66 Pounds
Manufacturer ‎Attwood
Material ‎Other
Model Name ‎Attwood Boating Deck Hardware
Number of Items ‎1
Package Weight ‎0.43 Kilograms
Part Number ‎94110-5
Size ‎One Size
Suggested Users ‎Unisex-adult

3.7

13 Review
5 Star
79
4 Star
11
3 Star
5
2 Star
3
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: RB
Works perfect.
I used this to put over multiple holes a former owner made in the transom. Worked like a charm. I had zero water in the boat after 4 hours.
Scritto da: ChrisWNY
Not ideal for modern transducers/Live Scope/Side scanners
If you're planning on mounting a more modern, sidescan/live scope or 3D scan type of transducer, this transducer mounting plate is not bulky or solid enough. The mounting plate itself is roughly 1/2 inch thick, most transducer mounting screws these days are 1 1/2 to 2 inches long. Modern transducers are heavy, upwards of 2-3 lbs. In no way should you mount a modern transducer with screws smaller than what came with the transducer, or it may pull straight out of the mounting block while your boat is on or above plane at higher speeds. The other drawback is whatever material this mounting block is made from, screws don't grip very well because the material melts and flexes around the screw threads. I'm 100% in favor of using mounting blocks for transducers for a few reasons - they can reduce the number of holes you put into your transom for mounting a transducer, they provide extra surface area for screws to grip, and they provide a cleaner look to your install. Ideally these mounting plates should be at least twice as thick. If you buy this transducer block for mounting a larger transducer (like I did), you can STILL use the mounting block but you'll end up having to thread your screws into the transom anyway. The advantage is that the transom block will add some extra "rigidity" to your installation. Always use marine silicone or sealant around where the screws are mounted, and use sealant on the screw threads as well to maintain a waterproof transom. Use a drill bit smaller than the diameter of your screw to make pilot holes before threading in the screws that came with the transducer, and use marine grade sealant on them as you will be going through the block and into your transom. I found that when pilot holes were drilled first into the mounting block, the transducer screws gripped a lot better. Overall this product is rather useless because it's not thick or solid enough for mounting modern transducers.
Scritto da: April R
Clean looking
It may be an offset color and came a tad curved, but I’m pleased with the way it turned out.
Scritto da: Mrs. B.
No screws included
Package was open without any screws
Scritto da: Jingyuan
Feeling cheap
It feels cheap. I don't recommend.
Scritto da: Nausheen M.
This works could be a tad thicker!
I used this to mount a Gamin ducer to my sailboat. Works as intended. I did notice it's slightly thinner than the mentioned 0.8 thickness. I added 4 stainless steel washer to my transducer screws so it wouldn't go past the saver and touch the boat or you could get shorter screws instead of using the ones that come with Garmin. I feel a little thicknesses to the item would have given it 5 stars!
Scritto da: Jim Roe
Easy to cut and use
To fasten pole holder to side of aluminum boat
Scritto da: Exiled
Great for Mounting Depth Finder Sensors on Transom
Adhered to boat transom with 3M adhesive to avoid drilling holes. Mounted Garmin Depth Finder sensor without issues." A little expensive for what it is, but better that putting holes in my Sea Ray.
Scritto da: Amazon Customer
Works great.
This was easy to install. Marine glue with 2 screws. The transducer mount was i stalled into this. Works perfectly!!
Scritto da: Rob
Excellent product
I purchased this for my boat to attach a transducer without having to drill holes in the boat. I used marine goop to attach this to my transom and didn't even need to use the screws provided. Perfect for my application and a great price compared to other similar products on the market.
Scritto da: J-H
Easy Install
Not much to say really. Doing exactly what I bought it for. Easy to install and does the job. Fast shipping for a remote destination. No complaints whatsoever.
Scritto da: Amazon Customer
Good and reasonably priced product
I didn’t use the provided screws. I used Scotch mounting tape. This worked very well!
Scritto da: Amazon Customer
Works great
Bought a new sonar, remove old transducer, mounted this plate and then put the old and new transducers on it. No problems, on there solid. Make sure you use the proper silicon.

Produits connexes

hot
Sea-Dog 588010 Porte-gobelet encastrable, 3 profondeurs - Noir Noir 3 pouces
3.5/5

€ 23.82

Sea-Dog 588010 Porte-gobelet encastrable, 3 profondeurs - Noir Noir 3 pouces
3.5/5

€ 23.82

hot
Porte-gobelet SeaSense (laiton chromé), 16 pouces
3.4/5

€ 43.22

Porte-gobelet SeaSense (laiton chromé), 16 pouces
3.4/5

€ 43.22

hot
Attwood 278AOP0912-BD-1 Base de piédestal pneumatique série 278 (- 2,75 sous le pont, hauteur 9 à 12, finition grise)
2.9/5

€ 320.39

Attwood 278AOP0912-BD-1 Base de piédestal pneumatique série 278 (- 2,75 sous le pont, hauteur 9 à 12, finition grise)
2.9/5

€ 320.39

hot
Seachoice Clé et outil universels non magnétiques en acier inoxydable pour pont de bateau marin
3.5/5

€ 26.36

Seachoice Clé et outil universels non magnétiques en acier inoxydable pour pont de bateau marin
3.5/5

€ 26.36

hot
Seachoice Lot de 2 clips de rangement en caoutchouc Noir Taille unique
3.4/5

€ 31.92

Seachoice Lot de 2 clips de rangement en caoutchouc Noir Taille unique
3.4/5

€ 31.92

hot
T-H Marine Supplies Verrou de poignée d'ancre Verrouillage noir
3.6/5

€ 68.28

T-H Marine Supplies Verrou de poignée d'ancre Verrouillage noir
3.6/5

€ 68.28

hot
Plaque de Pont Ovale - Blanc Polaire
0.1/5

€ 101.48

Plaque de Pont Ovale - Blanc Polaire
0.1/5

€ 101.48

hot
Sea-Dog 273285-1 Fixation de charni-re pour montage sur rail, glissière de pont - Noir
3.6/5

€ 35.71

Sea-Dog 273285-1 Fixation de charni-re pour montage sur rail, glissière de pont - Noir
3.6/5

€ 35.71

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu