Black Stallion T-shirt à manches longues pour homme Bleu royal, bleu

Name: Black Stallion T-shirt à manches longues pour homme Bleu royal, bleu
Brand: Black Stallion
SKU: 0013332906520
Price: 91.00 EUR
Availability: InStock

Brand:Black Stallion

3.6/5

€
91.00

Caractéristiques du produit : Le collier de soudage debout protège contre les étincelles volantes Se glisse facilement sur les vêtements Poche zippée dissimulée Coton léger résistant aux flammes Longueur allongée à l'avant Modèle # BXRB9C-M, Taille : Moyen Description du produit : Atteignant un nouveau niveau d'innovation, le BSX La veste de soudage utilise un design moderne pour créer un vêtement de protection mieux ajusté, plus beau et plus confortable. Black Stallion a créé une veste de soudage en coton ignifuge. La veste comporte un col montant pour protéger le cou du soudeur des brûlures, une longueur allongée à l'avant pour offrir plus de protection, pas de poches ouvertes où les étincelles peuvent atterrir et s'enflammer et des sangles de taille réglables pour donner un look plus ajusté. Si vous êtes à la recherche d'une excellente veste de soudage, c'est la veste qu'il vous faut ! AVERTISSEMENT : Ce produit peut vous exposer à des produits chimiques reconnus par l'État de Californie comme pouvant causer le cancer et des malformations congénitales ou d'autres troubles de la reproduction. Pour plus d'informations, allez sur www. P65Avertissements. Californie. gouv.

Montant

Ajouter au panier Acheter maintenant

EAN: 0013332906520

Catégories Outils et amélioration de la maison, Sécurité, Équipement de protection individuelle, Vêtements de travail protecteurs, Vêtements de sécurité, Jackets,

Bleu roi avec graphismes flammes contrastés. Bouton-pression pratique sur le devant et les poignets. Sangles de taille réglables. Collier de soudeur debout avec options de boutons-pression réglables. 9 onces. coton traité anti-feu. Lavage à la main seulement. Fermeture à pression. Doublure en coton. Coton.

Department	unisex-adult
Manufacturer	Black Stallion

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Alfredo Marquez-Miranda

Buena compra

Lo que esperaba…

Scritto da: Robbie Kent

Nice product, size runs small

A little tight for a 3XL, and little heavier than i expected so wasnt comfortable wearing during the warmer month in Wisconsin. I use it for MIG welding and the forearms unfortunately dont provide great protection from spatter. Otherwise it is a good quality product. Update: after 1st wash, it shrunk to fit more like a 2xl and now is too tight for me to wear.

Scritto da: Harry Flora

Order one size larger.

Good quality welding shirt but I recommend ordering a size up.

Scritto da: Logan Payne

Quality

I’ve had this welding jacket for about 4 months now and it has multiple holes in the sleeves from hot sparks and slag while welding, I’m worried about the quality of this jacket due to my arm(s) getting burnt

Scritto da: Elizabeth

Tuxedo of welding jackets.

If you’re a welder, this review is what you need to know. What you’re probably looking for: -light weight -comfortable -something to make you look good but not “I’m trying too hard” -protects you from spatter while keeping you cool. The pros: What you’re probably looking for: -light weight -comfortable -has an adjustable waist strap, one button to give a sexy fitted look, and another to loosen it after lunch. -makes you look good but not “I’m trying too hard” -kind of protects you from spatter* while keeping you cool. *Before I list the cons, please understand that there is not a jacket on the market that will stop molten metal from dripping through. You’re a welder. You’re going to get bit by spatter. But you’re a welder. You should know that. I just can’t believe the amount of people docking a star or two for thinking it was made of diamonds? The cons: -the neck button minutely of sucks to button. You have to pinch it between your finger and collarbone because you can’t a finger in there. -the flames are dumb but whatever. -I only have one of these. I wish I had 5. Shut up and buy it. Best twenty something bucks I’ve spent.

Scritto da: Chris Neill

I liked it but shrunk

I really liked the shirt but air dry it cause it dies shrink

Scritto da: JAKE H.

This welding jacket is worth every penny!

So I've been welding for many years now. I have always tried to use protective gear. If anyone has done any welding back in the day. They know that the gear was thick and heavy. Now with this Revco BSX BXRB9C Welding Coat Jacket is light weight, flexible, comfortable, and durable. I know that this jacket is labeled fire resistant, but you never know until it has been tested. To my surprise I never ment to test it this way. I was welding up some galvanize gates and noticed that my arm was getting a little warm then hot. To my amazement I had (1) dime size and (2) pencil eraser size slags smoldering on my sleeve. To my amazement it never burnt through. So for what I spent for this Jacket it is with every penny and saved a trip to the emergency room.

Scritto da: Fred Berfel

Nice heavy weight denim. Sturdy snaps.

Very nice shirt overall for a welding shirt. I wear a 16.5 x 34” dress shirt and this fits very well with easy flexibility. My son has worn it as well and he is more like a skinnier large size and he likes the fit too. Good long tail for tucking. Only had it 3 months, but I really like the feel. I wish it didn’t have the 50 cent piece sized black stallion logo on the arm, but I suppose if you removed the stitches before the first wash nobody would ever have know it was there. Still, for a purpose built shirt I guess I can’t fault them for advertising...at least it isn’t embroidered.