Bosch VAC004 Adaptateur de tuyau de 2-1/2" vers tuyau de poussière de 35 mm Adaptateur anti-poussière uniquement

Brand:BOSCH

3.3/5

25.97

DESCRIPTION DU PRODUIT Le VAC004 connecte des tuyaux de 35 mm à des outils qui ont des ports pour des tuyaux de 2-1/2 pouces. Les accessoires pour outils électriques Bosch vous aident à créer des systèmes d'outils complets qui élargissent l'utilisation de vos outils électriques. DU FABRICANT Cet adaptateur de tuyau d'aspiration connecte des tuyaux de 35 mm à des outils dotés d'orifices pour tuyaux de 2,5 pouces. Il peut être utilisé avec les produits Bosch suivants : * Scie à table de chantier Bosch 4000 10 pouces * Scie à onglets coulissante à double biseau Bosch 4410 10 pouces * Table de toupie Bosch RA1180 * Table de toupie portable Bosch RA1200 * Modèles de tuyaux Bosch VAC005, VAC006 , VAC007 et VAC008

Aucune unité disponible

EAN: 0000346336405

Catégories Outils et amélioration de la maison,

Utilisé sur les modèles : 4000, 4212, 4410, RA1180, RA1182, RA1200, RA1171, RA1181. Utilisé sur les références : BB1209, VAC005, VAC006, VAC007, VAC008, VAC021. Connecte 35 mm. tuyaux aux outils qui ont des ports pour 2-1/2 po. tuyaux. Développe l'utilisation de vos outils électriques.
Batteries Included? ‎No
Batteries Required? ‎No
Brand BOSCH
Color Black
Color ‎Black
Customer Reviews 4.3 4.3 out of 5 stars 555 ratings 4.3 out of 5 stars
Included Components ‎Unit^Instruction Guide
Is Discontinued By Manufacturer ‎No
Item model number ‎VAC004
Item Package Quantity ‎1
Item Weight 0.11 Pounds
Item Weight ‎1.76 ounces
Manufacturer ‎Bosch
Part Number ‎VAC004
Style ‎Dust Adapter Only
Thickness ‎1 Inches
Warranty Description ‎1 Year

3.3

13 Review
5 Star
68
4 Star
14
3 Star
9
2 Star
2
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Curtis
Fits my table saw perfectly
Needed to improve the vacuum function on my saw, this adapter allows you to connect a vacuum directly to the exhaust to catch sawdust.
Scritto da: Travis Thompson
Great fit for Ridgid Table Saw
Exactly what I needed for my Ridgid Table Saw. It fit on the inside, it wasn’t tight so I added a screw to hold it in place.
Scritto da: THE HAPPY PAINTER
Good
Everything worked like I needed
Scritto da: David Hughes
Perfect for my application.
Perfect fit between my shop vac (Rigid) hose and my Bosch 4100 portable table saw.
Scritto da: Simon Crisp
Useful Adapter, Built Tough!
I have many such adapters so that I can connect different power tools to my dust extractor, this one is especially sturdy.
Scritto da: Nathaniel Allen
It works, but some critique...
Being a Bosch product specifically for the 4100 table saw, I'm just a tiny bit disappointed. The adapter works, but... My shop vac is my dust collector, and I switch my orange Ridgid hose between my Bosch 410p and my Dewalt compound miter saw. Whereas the hose fits the Dewalt without an adapter, for the past year I've been plugging the undersized hose end into the oversized Bosch opening. Barely effective, but better that spewing sawdust into the room. This Bosch adapter fits INTO the tablesaw's exhaust port opening. Not AROUND the exterior, as I expected. This means the hose end creates a lip inside where sawdust collects. Not the worst thing in the world, but something that could have been avoided had this adapter been designed to fit around the outside of the saw's exhaust port. The small end of the adapter is an extremely tight (i.e. difficult to fit) diameter to the hose. Just another 1/32 inch in reduced diameter at the very end would certainly address this complaint. Otherwise, the Bosch adapter interfaces very nicely with the hose. Once all the pieces are fit together, the connections are tight. Dust collection is about as good as can be expected, with the exception of the small amount of build-up left behind in the the saw's exhaust port due to the lip. Disconnection, about half the time, results in the adapter being pulled from the saw, which could have been avoided had the adapter been designer to fit AROUND the saw's exhaust port. In any case, it's better than no adapter, and despite my criticisms, I'm happy have it.
Scritto da: T. Reich
Perfect - Festool Vac to Bosch Router table connection
This is just what I needed. I recently set up a Bosch router table in the shop for periodic use and wanted to add dust collection with a mobile Festool vac we already had on-site. This looked like it'd do the trick and indeed it does; The Festool hose fits snugly in the small end of the adapter and the other end fits snugly in the router table's fence port. Couldn't ask for it to be more simple. Nothing fancy beyond that; It's just a piece of (seemingly durable) plastic that is perfectly shaped to give the above result. Each end is tapered a bit to accommodate tolerance deviations in manufacturing of different hoses/ports, but that's pretty standard on these sorts of things.
Scritto da: Steve
Close fit
The adapter fits perfectly on the table saw, but the receiving end for my shop vac hose is a bit large. I've added a band of thin weather strip to the hose end to snug up that connection.
Scritto da: Harywood
Fits Perfectly
Great fit and low cost. Perfect for my Bosch saw.
Scritto da: Kirby Read
This i# the one
I bought this particularly for my Bosch table saw. It fits perfectly and also fits my shop vac. Now I don’t have to duct tape my vacuum to the saw to keep the dust down.
Scritto da: Doug Sadler
Fits my saw.
The adapters I found at the store didn't fit into the opening on the saw. This one did, so all is great.
Scritto da: Darrell
Depends what your using it for
No threads to put hose on.
Scritto da: Tamara Castonguay
Bosch Quality you expect
Nice fit and feel, and the Bosch quality you expect.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array