Bryant Electric RJ65WTR tradeSELECT JLOAD Prise multimédia inviolable, deux ports ouverts déchargés, 15 A, 125 V, blanc

Brand:Bryant Electric

2.8/5

44.47

Prise multimédia Bryant Electric JLOAD. Installez les prises et les appareils voix/données exactement là où ils sont nécessaires, dans le plus petit espace possible. Spécialement conçu pour fournir de l'énergie, Cat. 5e et coaxial dans un boîtier simple. Nécessite le boitier multimédia JLOAD RJ600. Parfait pour l'utilisation de la TVHD et de l'ordinateur lorsqu'une combinaison d'alimentation et de données est nécessaire. Comprend un cadre décoratif, un Cat. 5e, un connecteur F et une prise de courant 125V avec diviseur de tension. J-LOAD exclusif combine haute et basse tension en un seul groupe. Les produits de livraison spécialisés offrent une connectivité là où cela était auparavant impossible. Les grandes pièces, les cuisines, les laboratoires et les aires de loisirs peuvent tous bénéficier de ces produits. Faites-en plus dans un seul gang. Fournit des données téléphoniques et coaxiales. Accepte toute configuration de prise à encliquetage. Isole la basse tension et la puissance dans le même boîtier. Montage sur mesure et disponible en 15 A . UL listé 1863 - Accessoire de circuit de communication. Certifié CSA. Conforme RoHS.

Disponible en 15 ou 20 ampères. Fournit des données, téléphone et coaxial. Montage sur boîtier personnalisé. Isole la basse tension et la puissance dans le même boîtier. Accepte toute configuration de prise à encliquetage.
Brand Bryant Electric
Color White
Compatible Devices Television
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 4.1 x 3.7 x 1.29 inches
Item model number RJ65WTR
Manufacturer Bryant Electric
Product Dimensions 4.1 x 3.7 x 1.29 inches; 2.88 Ounces
Total Power Outlets 1

2.8

8 Review
5 Star
46
4 Star
19
3 Star
10
2 Star
12
1 Star
14

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Catering Online
This is great at a reasonable price!
I read the reviews before buying this and I noticed that everyone that left bad reviews it's because they did NOT read the description that you need a Hubbell-Raco 6239 box, and that is actually what I was looking for because the 6239 box comes with 2 outlets and I wanted 1 outlet and data. If you are planning to use in a regular box it will not work due to the positioning of the screws. The outlets for the 6239 box are double in price so this is a GREAT bargain!
Scritto da: Ken G. - Seattle Area
Read Description VERY Carefully!!
I missed the part in the product description where it says, "Requires JLOAD multimedia box RJ600." This will NOT fit a standard box. My mistake, but the seller should emphasize this restriction.
Scritto da: Xx
Doesn’t fit stand box
Good product, but I wish it was move obvious it doesn’t fit a standard box for the novice DIYer
Scritto da: Jake
Single-gang solution for both power and data
I knew going into buying this that it was supposed to be used with a custom Hubbell box. The screw locations are offset, and you won't be able to use this with a standard box. Also you're supposed to separate the high and low voltage sections with a "permanent barrier".Hubbell Multimedia Box has provisions for both the odd mounting positions and the ability to install a partition. With the help of a 3D printer I was able to solve both problems while using a standard old-work box, but it took some engineering. You probably should know what you're doing if you've buying this product. Its too easy to try and force fit it into the wrong type of box, or omit the partition and create a hazardous situation (or at least an installation that is not up-to-code) Recommend you consult an electrician. All-in-all, this is a good product, but probably best for new-work. I prefer the single-gang installation for flat-panel televisions. This gets the job done.
Scritto da: Sydney Henning
Requires modification to fit a standard outlet
This didn’t fit a standard outlet, but I was able to modify it to work. I bought blank face covers and an Ethernet connector, so I could plug an Ethernet cable into the back - no splicing Ethernet cables. It’s done. It works. I’m happy. But why doesn’t it fit in a standard outlet?
Scritto da: Seth
This solution is pretty slick and fit my needs for a single gang ...
This solution is pretty slick and fit my needs for a single gang / separated voltage solution. This comes with everything you need for combination with a Hubbell RJ600 box (or floor or cabinet box). I took off one star as the connection points are fairly thin and could break if you're not super careful during installation/adjustment. HDMI Warning: Because there is a voltage divider inside the single gang box, there is little room to fit in an HDMI keystone and molded HDMI plug. I experimented with a couple different ideas, but in the end needed to use a HDMI pigtail so I could turn the cable. This is extremely tight and requires some thought.
Scritto da: Reggie
I could not figre out how to mount the plate
Worked perfectly until it was time for me to mount this in the box and put the plate on...I had to modify o couple of things to make it work.
Scritto da: Jay E
Stupid to require a special box.
If you have boxes in place and you don't want to tear up your wall putting in a new one... this is a moronic choice. I will create a custom mount for this to get it to work but seriously.. This is just a money play to force you to buy their box.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array