Butée de fil réglable et jauge pour dénudeur de fil Katapult Klein Tools 11081

Brand:Klein Tools

3.3/5

25.06

À utiliser avec les dénudeurs/coupeurs de fil Katapult (réf. 11063W et 11063MET). Le dénudeur de fil Katapult de Klein Tools est doté d'une tête de dénudage pratique, qui permet aux professionnels de saisir et de dénuder facilement en appuyant simplement sur la poignée. Fabriqué en alliage coulé avec une finition Ecoat robuste pour une résistance à la corrosion et une durabilité. L'arrêt/jauge de fil réglable maintient l'outil comme neuf. Depuis plus de 160 ans, Klein Tools fabrique des outils à main de qualité professionnelle de qualité supérieure qui offrent les performances, la durabilité et la précision nécessaires pour bien faire le travail. Notre famille d'ingénieurs, de travailleurs et d'artisans continue de mettre six générations d'expertise dans chaque outil que nous créons en utilisant uniquement des matériaux de la plus haute qualité, une fabrication supérieure et en maintenant la fabrication aussi près de chez nous que possible. Klein n'est pas seulement le nom de notre entreprise, c'est aussi notre nom de famille. Et puisque nous sommes une entreprise américaine familiale et gérée par une famille, vous savez que vous pouvez compter sur nous pour être là demain. Klein Tools ne fabrique pas seulement d'excellents produits, nous fabriquons d'excellents produits qui répondent aux exigences des professionnels qui les utilisent tous les jours... Depuis 1857.

Finition Ecocoat pour la prévention de la rouille. Pièce de rechange pour garder les outils performants comme neufs. Maintient doucement le câble en place pour une coupe de précision. Aide à couper et à dénuder facilement les fils. À utiliser avec les dénudeurs/coupeurs de fil Katapult (réf. 11063W et 11063MET).
Batteries Included? ‎No
Batteries Required? ‎No
Brand Klein Tools
Country of Origin ‎Taiwan
Customer Reviews 4.2 4.2 out of 5 stars 52 ratings 4.2 out of 5 stars
Grip Type Ergonomic
Included Components ‎11081
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3 x 3 x 3 inches
Item model number ‎11081
Item Package Quantity ‎1
Item Weight 0.16 Ounces
Item Weight ‎0.16 ounces
Manufacturer ‎Klein Tools
Material Metal
Material ‎Metal
Part Number ‎11081
Product Dimensions ‎3 x 3 x 3 inches

3.3

12 Review
5 Star
56
4 Star
29
3 Star
3
2 Star
5
1 Star
7

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Ross W.
Makes life really easy
Adding the stop to the wire stripper makes it very easy when working with GFCI's or using the new push-in wired nuts that require a specific depth. With traditional wire nuts it makes getting everything stripped to a consistent depth very easy. Same with connecting to outlets screws.
Scritto da: Jesu
Quality part by Klein
Quality is as good as it gets, knurling is good quality, as is the plastic used. The clear plastic is quite thick and should hold up well.
Scritto da: lesvance
Great addition to the Katapult wire stripper
I've gone through my entire life stripping 12ga wire with a jack knife. had to wire a new stable for some friends of mine. Getting the strip-length right was a piece of cake. But you still have to be careful about nicking the conductor.
Scritto da: Jordan Simpson
Klein Tools should include this when buying Katapult.
I have been using Klein Katapult since the year 2011. Only recently I learned this depth gauge has always been available. Don't know how I got by without it. Magnifies seeing the wire too while placing in correct strip hole.Overall build quality could be better but I like it anyhow. Shipped and delivered on time.
Scritto da: Peter H
Ludicrously overpriced, poorly designed
The Klein Katapult should include a depth stop as standard. This is a ridiculous amount of money for two small screws and a piece of plastic. The stop is not well designed - it is obviously a kluge that was added on later. The plastic part rotates freely on the rod, so you have to make sure it is square as you tighten the lock screw. The stop goes all the way down to zero strip length, which is obviously useless; as a result, you have reverse the stop on the rod to get longer strip lengths. There is no way to flip the stop out of the way for a one-off strip of an odd length. The rather crude built-in (and therefore free) stop on the Irwin stripper is better. No instructions are provided; you have to deduce that you must remove one of the existing screws from the Katapult and replace it with the rod.
Scritto da: Kindle Customer
Mine cracked and became useless after a few resets to different lengths
The screw needs to be tightened very tight for the stop to stay in place. Otherwise the stop slides slightly with each use of the stripper and the adjustment is lost. Mine cracked and became useless after a few resets to different lengths. This should have been a metal part instead of plastic.
Scritto da: Scott L.
Great idea, but the attachment screw not the correct size
I love my stripper. And I love the idea of this wire stop gauge. However the attachment screw is not the correct size and after some use, the screw simply strips out of the tool. The threads inside the tool itself are fine, but the attachment screw threads will not hold this wire stop gauge. It is very frustrating. I called Klein to see if they will replace or even just fix the new parts that they make. We'll see what they do. Again, love the tool and idea, but the execution is quite poor.
Scritto da: mojobill
A little flimsey
A little flimsey, plastic cracked 1st week. Should be all metal maybe?
Scritto da: Felipe Reding
Muy útil (Compra varios...)
Muy útil para cuando tienes que desforrar múltiples cables a una misma longitud; por ejemplo cuando vas a instalar todos los apagadores/contactos de una misma marca en una casa. El tope es de plástico, así que no esperes que soporte el abuso y el maltrato, de cualquier forma como no es un producto caro, recomiendo comprar varios de una sola vez para irlos reemplazando cuando se dañen. La relación costo/beneficio es muy buena
Scritto da: mekeni
Build a all metal parts just like the original design.
Very poor plastic material lasted only for few days a combination of metal and sub standard plastic parts is bad idea.
Scritto da: TDM
Improper screw size
Improper screw size
Scritto da: Amazon Customer
Five Stars
must have add-on for klien katapults

Produits connexes

hot
DEWALT DCE15111 Douille 3/0 THHN&XHHW CU
3.2/5

€ 73.12

DEWALT DCE15111 Douille 3/0 THHN&XHHW CU
3.2/5

€ 73.12

hot
WEICON Pince à dénuder n° 5 Classic
3.4/5

€ 69.44

WEICON Pince à dénuder n° 5 Classic
3.4/5

€ 69.44

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array