Capteur de plafond Enerlites MPC-52V PIR, capteur d'occupation au plafond, capteur de lumière au plafond, capteur d'occupation, champ de vision à 360 degrés de qualité commerciale, 800 m². Couverture en pieds, 120-277VAC, blanc

Brand:ENERLITES

3.2/5

66.38

Capteur de présence infrarouge passif à montage au plafond à 360 degrés de qualité commerciale avec détection de mouvement. L'interrupteur du capteur de plafond allume et éteint automatiquement les lumières lorsqu'un mouvement est détecté. Économisez de l'argent sur les factures d'énergie en installant Enerlites MPC-52V car le temps d'installation est réduit de 45 minutes à 10 minutes. Aucune boîte de plafond n'est nécessaire pour ce produit. Comprend deux lentilles gratuites dont une pour une portée plus proche qui est plus sensible au mouvement et une pour une portée plus longue avec moins de sensibilité. Pour installer ce plafonnier à détecteur de présence, percez simplement un trou dans le plafond avec votre tournevis, insérez la plaque arrière dans le trou, puis faites passer les fils et connectez-vous. Le plafonnier est idéal pour une utilisation professionnelle ou commerciale à des fins de commodité, d'efficacité énergétique, de sécurité et de surveillance. Personnalisation : • Temporisation réglable : 15 sec. - 30 minutes. • Réglage de la sensibilité : 50 % / 100 % Spécifications : • Lentille de Fresnel à 360° et à plusieurs niveaux pour une détection de présence supérieure • Couverture : champ de vision à 360° ; 800 pieds carrés de couverture • Température de fonctionnement : 32° à 131°F (0° à 55°C) • Incandescent 800W @ 120VAC, 60 HZ • Fluorescent 800VA 277VAC, 60 HZ • Moteur : 1/4 HP, 120VAC,60 HZ • Désignation du fil : Chaud, Neutre, Charge • Technologie infrarouge passive, commutateur de détecteur de mouvement PIR • Contrôle l'éclairage à incandescence, CFL et DEL. • Homologué UL

Le support de plafond du capteur de présence est homologué UL, incandescent : 400 W à 120 VCA ; Fluorescent : 800 VA à 120 VAC, 1 200 VA à 277 VAC ; Moteur : 1/4 HP @120VAC. Température de fonctionnement (32 – 131 °F), aucune boîte de plafond n'est nécessaire. Lentilles de Fresnel à plusieurs niveaux : le capteur de plafond comprend deux lentilles interchangeables pour différents niveaux de sensibilité. Personnalisez pour de meilleurs résultats. Champ de vision complet à 360° Lentille de Fresnel couvrant jusqu'à 800 pieds carrés. Conçu pour une hauteur de plafond d'environ 8 à 10 pieds. Qualité commerciale, idéal pour les entreprises et les propriétés commerciales. Le détecteur de mouvement au plafond peut être directement fixé au luminaire ou au plafond pour une installation facile. Percez simplement un trou dans le plafond, puis faites passer le câblage, ce qui réduit le temps d'installation de 30 minutes. Le détecteur de présence à montage au plafond utilise la technologie infrarouge passive (pir) pour allumer automatiquement les lumières.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ENERLITES
Brand ‎ENERLITES
Certification ‎UL
Color White
Color ‎White
Customer Reviews 4.2 4.2 out of 5 stars 76 ratings 4.2 out of 5 stars
Included Components ‎MPC-52V
Is Discontinued By Manufacturer ‎No
Item model number ‎MPC-52V
Item Package Quantity ‎1
Item Weight 0.01 Ounces
Item Weight ‎0.01 Ounces
Manufacturer ‎Top Greener Inc
Maximum Range 10 Feet
Maximum Range ‎10 Feet
Mounting Type ‎Ceiling Mount
Part Number ‎MPC-52V
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎5.1 x 4.3 x 4.4 inches
Switch Style ‎Temperature Switch
Wattage ‎400 watts

3.2

9 Review
5 Star
58
4 Star
23
3 Star
7
2 Star
3
1 Star
10

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Circle C
Great Instructions
What impressed me the most was the completeness of the instructions and each wire was clearly marked in layman's terms. I also like that you don't have cut a 4" hole to install it. The unit has three main components. The base, the sensor and electronics, and the cover. I plan on ordering another one for my office which has the wall switch inconveniently placed behind one of the French doors making a switch mounted sensor unusable.
Scritto da: Casual Reviewer
Watch out for the lenses in the box
I installed it in a room with an 8ft ceiling and I had to walk almost directly below it for it to work. UPDATE after a couple hours of research.... Frustrated at the prospect of returning a device I just bought and installed, I began reading about passive infrared technology on my phone in the dark room I was trying to automatically light up. In my research I found an article mentioning how a fresnel lens (the jewel shaped lens on the cover) helps with the sensitivity of the devise because it divides the field of view into zones that the detector can monitor. I then remembered seeing when I unpacked the box, a spare lens inside and thought it odd for them so supply one. To try my luck, I took the lens that was mounted on the cover and compared it to the spare one and to my amazement saw that the interior face of the spare lens was much more textured. To try my luck I swapped them out and all my problems went away. The instructions do not make any mention of this so I am not sure if they indeed supply lenses with two sensitivities or whether one was defective. I give it 5 stars for working as advertised minus 1 for either poor documentation or providing defective lenses.
Scritto da: Robert L Klawuhn
Easy to install and works well.
It seems to be very sensitive. Maybe too much sensitivity for a small porch, even at the low setting. But it works great and was simple to install.
Scritto da: A. Adams
Failed in less than one week of actual use
Update: Failed just one day after my return window closed. At around 2AM in the morning it started turning on and off repeatedly without any trigger. One day later fails to register any motion. Will now have to follow up on the two year warranty but i'm not holding my breath... Typical passive infrared (PIR) occupancy sensor that is easy to set up and wire. Adjustable time settings are 15 seconds, 5 minutes, 10 minutes, 20 minutes, and 30 minutes. Really wish they had 1 minute as 15 seconds is too short and 5 minutes is much too long. Didn't test the ambient light settings that much (cool feature that won't turn on the lights if the sensor detects enough ambient light). Did change the sensitivity down to 50% (either 50 or 100% sensitivity). The kit included another lens and some pie shaped stickers so that you could 'blind' the sensor to certain unwanted triggers (IE sunlight, window, adjacent space, heater vent, etc). The wiring has a black (hot) neutral (white) and red that goes to the load. Underneath the cover they have two screw holes or you can use the threaded nut connection and washer to affix the stem on the backside through a material such as drywall or plywood. Conveniently the stem also has some thread for 1/2" flexible conduit so no adapter would be needed just in case the application required conduit. Literature lists a two-year warranty. Using this sensor in a walk-in closet for hands free activation and no worry automatic shut off.
Scritto da: Amazon User
Easy install.
So far so good. Turns on when you expect. I use it for a closet and the range is perfect. It has multiple time and light settings. Also includes tape pieces to mask from detecting unnecessary movment. I bought it because I could mount it without requiring additional install of junction box. Keep in mind you still need access to ceiling to tighten nut that holds it against drywall. So don't place too far from light fixture. Looks nice and clean.
Scritto da: Jeff
Excellent solution for ceiling sensor
This ceiling mounted infrared motion sensor works as described and is well made. Although it appears to be designed for suspended ceiling applications, I was able to install this in an existing sheetrock ceiling to control a ceiling fixture in a hallway. I used an old work ceiling box and a cover plate because the size of this sensor did not match with any old work box that I could find readily. This unit has been performing flawlessly for several weeks now. UL listing is a plus.
Scritto da: Fab.
works ok
But needs adjustment, change of the cap head depending of your configuration otherwise you need to be right under for it get triggered.
Scritto da: ronald rorick
works great
i use it for a bathroom and its work great
Scritto da: Cam Summerfeldt
Not a direct fit for standard ceiling boxes.
Great operation but not typical mounting style or size. Extra trim pieces will need to be made or purchased.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array