0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Cen-Tec Systems 95237 Jeu d'adaptateurs d'outils électriques multimarques étendus à clic rapide pour dépoussiérage, jeu d'adaptateurs étendus noirs

Brand:Cen-Tec Systems

3.5/5

€
69.23

L'ensemble d'adaptateurs d'alimentation multimarques étendu de Cen-Tec Systems est conçu pour connecter une large gamme de grandes marques d'outils électriques à l'aspirateur de votre magasin pour la récupération des débris et de la poussière générés lors de l'utilisation de l'outil électrique, vous gardant ainsi que votre magasin. nettoyer tout en vous protégeant des particules en suspension dans l'air qui peuvent nuire à votre santé. Les adaptateurs sont conçus pour être polyvalents avec la plupart des connexions uniques et typiques de l'industrie de l'outillage. Le collier intérieur avec clip en acétal durable se connecte directement à la plupart des marques de ponceuses pour cloisons sèches et autres outils générant de gros volumes de poussière ou ayant de gros profils de débris. Un raccord à baïonnette avec 1 raccord moulé en TPE souple est parfait pour les connexions de petits outils électriques. La rotation douce à 360 degrés de la baïonnette empêche le tuyau de se plier ou de résister au libre mouvement de l'outil électrique. Le passage du raccord 1 à un raccord TPE souple de 1 ½" populaire sur de nombreuses scies à découper et toupies ne prend qu'une seconde grâce au système de clip rapide. D'autres adaptateurs inclus dans cet ensemble étendu sont ¾" et 1-1/4, s'adaptant à d'autres marques d'outils et de carénages. Enfin, un purgeur d'air est conçu dans le raccord à baïonnette pour permettre le réglage du flux d'air au niveau de l'outil si nécessaire pour empêcher les outils de se sceller à la surface de travail. L'adaptateur final inclus est un adaptateur d'aspirateur humide/sec standard supplémentaire de 2 ½ dans l'adaptateur de connexion rapide. Cela permet un brassard de 2 ½ dans tout le système afin de travailler avec des stations de dépoussiérage souvent utilisées avec des scies à table.

Montant
Ajouter au panierAcheter maintenant

EAN: 0810178032327

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs,

Le TPE souple du raccord permet au raccord de s'adapter à la forme de l'orifice d'échappement de l'outil électrique sélectionné. L'ensemble d'adaptateurs est uniquement compatible avec le tuyau indéformable fileté 1-1/4 n'est pas compatible avec le tuyau moulé par soufflage inclus qui est livré en standard avec la plupart des marques d'aspirateurs d'atelier. Compatible avec les adaptateurs et tuyaux Cen-Tec suivants 94511, 94522, 94434, 95193, 95204, 95215. L'ensemble est antistatique, offrant un environnement sans choc aux aspirateurs et tuyaux mis à la terre. Conçu pour s'adapter à la plupart des grandes marques d'outils électriques et de haubans de travail, y compris Skill Bosch, Ryobi, Makita, Dewalt, Festool, Fein, Cobalt, Porter Cable, Hitachi et Milwaukee Electric. Livré avec un système de clic rapide pour se connecter au port d'échappement sur toutes les grandes marques d'outils électriques portatifs et fixes. Un collier avec anneau de serrage et raccords à baïonnette avec raccord TPE souple ¾" 1" 1-1/4" 1-½" sont conçus pour accepter et maintenir les orifices d'échappement conçus pour s'adapter au tuyau à l'intérieur ou à l'extérieur, comme l'exige la conception des outils électriques. d'un raccord d'extrémité à l'autre prend quelques secondes et offre une connexion pivotante à 360 degrés pour empêcher le tuyau de se plier ou de restreindre le mouvement de l'outil électrique. L'ensemble d'adaptateurs étendu comprend des raccords de carénage pour outils électriques 3/4 1 1-1/4 1-1/2.
Batteries required No
Brand Cen-Tec Systems
Color Black
Country of Origin USA
Customer Reviews 4.5 4.5 out of 5 stars 2,758 ratings 4.5 out of 5 stars
Included Components adapter set
Item Dimensions LxWxH 8 x 6 x 4 inches
Item model number 95237
Item Weight 15.5 ounces
Manufacturer Cen-Tec Systems
Material Thermoplastic Elastomer
Material Thermoplastic Elastomer (TPE)
Product Dimensions 8 x 6 x 4 inches

3.5

13 Review
5 Star
70
4 Star
16
3 Star
7
2 Star
3
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Jeff D.
Works great, but if you use this for woodworking buy the antistatic one
I bought this to help me clean out home air ducts and for woodworking dust collection. I did an hour of sanding and the air around the hose is crackling with static electricity. I didn't get shocked, I was just surprised. It didn't seem unsafe, it was uncomfortable. This same brand sells antistatic versions of these hoses. The quick connection is compatible with my Bosch vacuum attachments. There isn't a rubber gasket on the hose end like my Bosch hose so it leaks more vacuum pressure but it works fine for my uses.
Scritto da: Linda
Nice quality
We really like this long hose however in order for it to fit the ends we had to order an extra piece from the company
Scritto da: 2 Logical
Works w/ Makita tracksaw and Rigid vacuum
I didn't include a pic of the hose attached to the tracksaw but other users have shown that. Without batteries Makita's XPS01z and Centec's 16' hose fit in the Makpac XL case with room for other typical small items for tracksaws. i.e. Bench dogs, a square + a couple clamps etc. However, if you can get by with 10' of hose that would make this much easier. The hose is nice and soft but does not like to twist(rotate) so it can whip around a bit when you spin your tools. Since the hose itself is light and supple this hasn't been a problem. So far it's doing its job.
Scritto da: Scotty Gregersen
Perfect fit for Bosch GCM miter saws
I am exceptionally pleased with how this fits up to my miter saw. It's like it was specifically made for it. AND it was cheaper than the Ridgid hose/adapter combo that I was going to use. I had bought multiple adapters and hoses from Home Depot and Lowes to try and find a dust collection solution for my miter saw. The hose side of the dust extractors on the Bosch GCM saws only allow male hose attachments due to the rivet tabs on the outside. I had come up with a couple solutions using an adapter and 2.5inch hose (too bulky and got in the way), or the Ridgid pro-grade 1-7/8" hose (just the slightest bit loose in the saw). I decided to come on Amazon and see if there were better adapters which would work with my 1-1/4" hose I already have. I came across this Cen-Tec hose with multiple adapters and figured I'd give it a try since it was cheaper than the Ridgid pro-grade. I wasn't expecting much, but when I pulled it out of the box and saw the blue ring which was similar to the one on the dust bag I got excited which quickly turned to elation when it fit perfect on the saw. The other end of the hose connects well enough to the duststopper. It will only go in as far as you can see in the photo, but it is tight and won't come out. Update: I tried the two adapters that came with the hose on all the tools I have with dust collection. The following is what the adapters work with, and what they don't. Also, I included measurements of the adapters. Adapter 1: I.D. ≈25.5mm / O.D. ≈35.5mm at end tapers up to ≈ 37mm; ≈ 40mm at raised rib. (see photos) Adapter 2: I.D. ≈ 38mm / O.D. ≈ 48.5mm Tools that at least one of the adapters will work with: Dewalt DWE6423 sander (most likely all Dewalt palm sanders) Dewalt DW6182 plunger router base for the DW618 router. Ridgid random orbit sander Model# R8606B Ridgid palm router Model# R860443B Makita SP6000J plunge saw Tools that these adapters won't work with: Ridgid belt sander Model# R86065B Rigid Jig Saw Model# R8832B Dewalt DWS779 Miter saw (the smaller adapter can be forced in, but only a small portion will fit. You would need to tape it to prevent it from falling out)
Scritto da: CrazyGeorge
Fit exactly as described
Fit exactly as described on Bosch miter saw
Scritto da: Michael C.
Great hose, almost great adapters
The hose itself is great. It looks nice, it is sturdy, and has a nice quick-disconnect clip end. The shop-vac end fit just fine. Neither adapter fit either of my palm sanders, though, which have 35mm exhaust pipes. I should have measured, instead of assuming "industry standard" would work for me. The adapters are also a little bit long and straight, which can be awkward hanging off the back of a sander. (especially if duct-taped to the end of the pipe on the tool) The upside is that the adapters swivel and latch on the hose, so the hose won't pop off, and won't coil up as hand-held tools move around. I 3D printed my own adapters, which turned out really nice. Creating a mating clip-end for the hose is really easy. Open your favorite CAD software, draw a cylinder with diameter 50.5mm and height 28mm, then cut out a cylinder 45.5mm dia / 26mm high, then cut out a horizontal oval cylinder 8.2mm from the opening with dimensions 5.6mm x 10.9mm. (the clips fall into these, to latch) For bonus points, cut the ovals further back for better finger access to release the clip. Then cut a hole 28mm dia in the back wall (air passage) and model the rest of the part that connects to your tool.
Scritto da: Woodhead
You need it, I sure did! Save your lungs from all the fine dust you make.
I really liked that the hose does not shorten-up when the suction end is blocked! I have another (Rockler) stretchable dust hose that trys to shrink way up when the nozzle is blocked (even if only for a moment) - it pulls the tool out of position and knocks anything in its way over. This does not shrink or whip around. On the other hand, since this hose does not shrink-up, it takes more space to store (well worth it for me). The quick detach ends work well, making it easy to switch from tool to tool - if you leave the rubber adapter ends on your tools. I also bought the optional set of more rubber adapter ends - this gives me all the sizes I need for all my tools. I’m really glad I bought it! I used it on my belt sander, 3 orbital Sanders, a drill press and a track saw. I would like to find some plain nozzles for general cleanup too
Scritto da: Brad
A little cheap but it works
It's a little cheap in build but it works fine.
Scritto da: Don or Betty
Vacuum hose
Well built vacuum hose, works perfect on my hand sander
Scritto da: Robin
Great Suction
I was surprised to find that upgrading my hose made such a difference in the functionality of my shop vac. This is a great hose. Like other reviewers, the fittings don't fit all of the tools in my shop but that is to be expected with every brand having their own proprietary fittings. I am very pleased with this purchase. And I would buy it again.
Scritto da: spinedr
Flexible material
Love the flexibility when cleaning my 20 foot dryer vent.
Scritto da: Amazon Customer
Streamlined dust extraction and cleaning
I'm the type to avoid setting up the shop vac because I don't want to put the effort in. Bought a couple sets of these so all my tools are 1 click to set up, and my 30-foot vacuum hose is now 1x 10 and 1x 20 feet so I'm not wrestling with coiling and uncoiling it all the time. Swivel action is a lifesaver here!!
Scritto da: Ryan
Required some modifications
I bought this to connect my existing ridgid vac setup to my new makita track saw. One of the included connectors fit the saw just fine but the included vacuum hose end did not fit the ridgid hose at all and all the connectors are useless without it. In the end I tried pulling just the runner piece off the connector that fit the saw, and the other end just happened to fit my existing hose end. I was going to initiate a return but it worked out in the end.

Produits connexes

hot
Meule de finition pour métal Cubitron II Scotch-Brite, 6 po x 2 po x 1 po 4A CRS, 2 par caisse
0.1/5

€ 521.17

Meule de finition pour métal Cubitron II Scotch-Brite, 6 po x 2 po x 1 po 4A CRS, 2 par caisse
0.1/5

€ 521.17

hot
Pince à circlips de précision coudée à 90° interne
3.8/5

€ 58.11

Pince à circlips de précision coudée à 90° interne
3.8/5

€ 58.11

hot
Freud 1/8 x 1/2 Up Cut Spiral Ball Nose - Carbure monobloc, tige 1/4, longueur totale 2-1/2 (72-100)
4.1/5

€ 74.28

Freud 1/8 x 1/2 Up Cut Spiral Ball Nose - Carbure monobloc, tige 1/4, longueur totale 2-1/2 (72-100)
4.1/5

€ 74.28

hot
DEWALT Kit de cisailles à métaux 20 V MAX, tête pivotante, 18 GA (DCS491M2)
2.8/5

€ 523.49

DEWALT Kit de cisailles à métaux 20 V MAX, tête pivotante, 18 GA (DCS491M2)
2.8/5

€ 523.49

hot
Titan 11207 Micro-embout à cliquet décalé 3-1/2"
3.8/5

€ 36.86

Titan 11207 Micro-embout à cliquet décalé 3-1/2"
3.8/5

€ 36.86

hot
Meule à tronçonner Dremel 420, diamètre 15/16 (23,8 mm), épaisseur de disque de 0,40 po (1,0 mm), accessoire pour outil rotatif de coupe (20 pièces), argent
3.7/5

€ 22.57

Meule à tronçonner Dremel 420, diamètre 15/16 (23,8 mm), épaisseur de disque de 0,40 po (1,0 mm), accessoire pour outil rotatif de coupe (20 pièces), argent
3.7/5

€ 22.57

hot
Crescent Nicholson 15056NN, multi
3.7/5

€ 25.92

Crescent Nicholson 15056NN, multi
3.7/5

€ 25.92

hot
Southwire SDISET3 Jeu de 3 tournevis isolés avec embouts Phillips, à fente et à tige
3.9/5

€ 51.38

Southwire SDISET3 Jeu de 3 tournevis isolés avec embouts Phillips, à fente et à tige
3.9/5

€ 51.38

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu